Hey all!! Just found this area!!!
I have built a 20" scale CBG for my grandson - I want to tune it GDG, that same as what I play. What gauge strings should I be using? I tried 36, 26 and 17 but it sounds wonky. Can anybody point me in the right direction? Thanx

Views: 1558

Replies to This Discussion

Figure it this way:  On a full-scale guitar, say with a 24" to 25" scale length, 20" would be about the 5th fret.  So, in standard tuning, a full-scale guitar capoed at the 5th fret would be:  A-D-G-C-E-A.  To get the tuning you want on the 20" instrument, you could go either high or low.  For the low tuning, you'd use an E6 (it would be tuned a whole tone flat), and the normal A5 and D4 strings from a set.  For the high tuning, you'd use the normal D4, B2, and E1 strings with the B and high E strings tuned flat a whole tone. 

When you're down-tuning from normal tension, it's a good idea to go a little heavier on the gauge of the string, to get good volume and tone. 

So, for the low tuning, I'd go:  .056 (or even .059), .045, .035.  (Basically, the E6, A5, and D4 strings from a medium/heavy acoustic set).

For the high tuning, I'd use .045, .026, and .017.  The two high strings are what you've already used.  Did they sound "wonky", or was it just the low G?  If the higher strings sounded wonky, you could go a little heavier on them, maybe .028 and .019 - they are tuned a whole note flat. 

Thanx Michael - that's the info I needed - it always seems to be the thick (low) string that loses it's umphh - I've tried 46, 36 and 26 and it's better - but I may keep fiddling around with it .

Are you tuned to the "low" G-octave, or the "high" one?  (The low one starts at the G on the 6th string/3rd fret on a full-scale guitar in standard tuning; the high one starts at the pitch of the open 3rd string on the full-scale guitar in standard tuning.)

If it's the low tuning, then 46 is really thin for the low string - I'd use it for the middle string, and go to something more like a 56 or 59 for the low string (that would be the E6 string of a medium/heavy acoustic string set).  If it's the high tuning, then the 46 is about right for the low string, but the other two are kind of on the thick side - they must be really tight.  But if you can handle the tension, that's great - thicker and tighter is better for tone and volume, provided you don't break strings or kill your fingers (or warp your neck...).

I'm not sure - I want it to sound the same as my 25.5 scale - I'm guessing it's the "low"
"Thicker and Tighter"????? We're still talking about CBG's right!!!
Sorry, couldn't let that one go by!!!

It could sound like your 25.5" scale either high or low, depending on how you tuned the 25.5".  If you compare it to a regular 6-string, full-sized guitar, what strings/frets match the pitch of your 25.5"?  (That probably should have been the first question to ask...)

""Thicker and Tighter"????? We're still talking about CBG's right!!!"  Is THAT what we're talking about!!!

I fiddled around with various string sizes on a 19.1" scale CBG tuned to GDg and have found the most sustain and best tone with .037"w, .023"w, .013" as measured with a dial calliper.  It has an electric single coil pickup and the Cohibia cigar box top has one stressed 1/8"x1/4" brace perpendicular to the neck under the bridge.  It now has very nice tone.  It's amazing for such a short scale.

-- Fred

This is my 19.1" scale GDg tuning.

- Fred


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Fret template

Started by Randy Drysdale. Last reply by Tim Pannabecker Jan 28, 2019. 6 Replies

String gauge for 20" - GDG

Started by jawbone. Last reply by Uncle Fred Sep 22, 2014. 7 Replies

Cura saz scale length

Started by Cin wel. Last reply by Cin wel May 25, 2013. 4 Replies


Started by Mike Sibinga. Last reply by wormil Jan 12, 2013. 3 Replies

Fret marking method

Started by Jillian Holladay. Last reply by wormil Jun 4, 2012. 2 Replies

Reverse calculations

Started by Martyn Hartley. Last reply by Martyn Hartley Apr 22, 2012. 2 Replies

Fret placement and stretch compensation - by Glenn Reither

Started by Penny Nelson. Last reply by Penny Nelson Apr 17, 2012. 4 Replies

Question on Scale Length

Started by Waid Jones. Last reply by Steve wootten Apr 16, 2012. 2 Replies

Scale length vs tuning note

Started by Matt Quinney. Last reply by Rand Moore Jul 16, 2011. 3 Replies

ukulele fret measurement

Started by ukeplayer. Last reply by Steve Pollack Mar 20, 2011. 6 Replies

String FAQ - let's get it going!

Started by Mama Mojo. Last reply by Mark Mercer Jan 27, 2011. 6 Replies

neck widths

Started by Bob Young. Last reply by Chuck Dubman Jan 23, 2011. 2 Replies

3 string guitar string gauges

Started by Bob Young. Last reply by DrByte Jul 22, 2010. 3 Replies

New things you can do with a guitar fret template

Started by Alan Roberts. Last reply by Chuck Dubman Mar 28, 2010. 5 Replies

longer box, shorter neck?

Started by Peter Taylor. Last reply by Pineee Johnny Feb 25, 2010. 3 Replies

violin Tailpiece??

Started by Penny Nelson. Last reply by Wichita Sam Jan 3, 2010. 1 Reply

Latest Activity

BrianQ. replied to Dan's discussion Boxes no stamps
"Also, search “how to remove labels” here & you’ll probably find some info,…"
2 hours ago
BrianQ. replied to Dan's discussion Boxes no stamps
"There is no such thing, it’s been a regulation since before we were all born? The all wood…"
2 hours ago
Korrigan posted a video

Santa Sings Santeria by Sublime

I don't know where yer from but round these parts this is considered a Christmas carol. :DHappy Holidays Everybody!
3 hours ago
Silent Jim posted a photo

Wes Carl Slide Amp and Boost

Fly away home Brotherman...I love you.
6 hours ago
Dan posted a discussion

Boxes no stamps

Hi all!Any info on boxes with no tax stamps or cautions.Thanx in advance!DanSee More
7 hours ago
Dan liked Dan's profile
7 hours ago
A.D.EKER commented on A.D.EKER's video

Whatyoumaycallit BCB 2022

"thanks AGP# ! thats a nice one  aswell , Will keep that one in mind…"
7 hours ago
Taffy Evans replied to Engblom's discussion Pickup type and placement
"Hi, I thought I would show how I mount pickups in my CBGs and still keep the top free of any…"
8 hours ago
Gary W aka Rev. Bluejeans commented on Vladimir Mazic's photo

My first CBG

"Really nice, especially for a first build!  Welcome to the addiction!  (It's a good…"
8 hours ago
Taffy Evans commented on Rich's photo

cloth box headstock view

"Hi, looks good to me, as long as the string stays in its groove, all good. OR... you could wind the…"
8 hours ago
Gary W aka Rev. Bluejeans liked T-Gripped's photo
8 hours ago
Gary W aka Rev. Bluejeans commented on Brian Fink's photo


"Great repurposing!  Looks awesome."
8 hours ago


© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->