We have a LMI template for a 25.5" scale guitar fretboard. But a friend told me that this can be used for 25.5" dulcimer, too. "A dulcimer is just a guitar fretted without sharps and flats," he said. So I checked the fret calculator and saw that
Inches -- Dulcimer -- Guitar
2.762 1st 2nd
5.261 2nd 4th
6.397 3rd 5th
So just use the 0, 2, 4, 5, 7, 9, 10, 11, 12, 14, 16, 17, 19 guitar frets for dulcimers.
But wait, folks. Now for the WEIRD part. I can use a 25.5" guitar scale to make a 13.5" scale soprano ukulele fretboard, too. If I use the 11th guitar fret as the 0 fret on the soon-to-be uke soundboard, I can use the next 12 fret stops to cut frets. I called up the StewMac fret calculator to check this (and double-check for yourselves). If I subtract the distance from the 1st uke fret from 12th fret, I get 11.992 (the distance of the 11th guitar fret). Subtract the 2nd uke from the 13th guitar, you get the same number. Errors build up, so that by the time you get to the 10th uke fret minus the 21st guitar, you're up to 11.996 -- an error of 0.004 inches.
I can live with that.
Tags:
You can use the template you have to make many other scales. .
Thanks,
Dave
David West said:You can use the template you have to make many other scales. .
Thanks,
Dave
(pours a second cup of coffee, sharpens pencil, warms up calculator) So, with a 25.5" scale template, I can skip down to the second fret at 2.782" and make that my 0 fret and end up with a baritone uke with a scale of 22.718. I ran this through the StewMac calculator and checked the fret to fret distances...
So I'm just going to make up a spreadsheet then. If you start at fret number N, you will end up with a fretboard with a scale length of X, making it a (baritone, tenor, standard, soprano) uke. While I'm thinking about this, the LMI has a SECOND set of notches on the other side for a 24.625" Gibson neck. That would give me LOTS of choices. When all is said and done, I'll go with some decimal that has a rational fraction ... the 22.718 is close enough to 22 23/32."
You can use the template you have to make many other scales. For any musical instrument scale, the 12th fret is exactly 1/2 the distance from the nut to the bridge. If you put a capo on any fret, it acts as a new nut...count up 12 frets...that is your new halfway point. If your scale has 19 fret marks, you can make any length scale tht would come from having the nut at the first fret...second fret...and so on. You could use it for baritone guitar, baritone uke, tenor uke, concert uke, mandolin, mandola, or soprano uke, or balilika. The dulcimer use you found is cool. I built a dulcimer when I was 16, (49 now)the nut and bridge were movable and have both moved...I forgot it's relationship, now I will just find the what would have been the 12th guitar fret, and work in both directions..lol.
Thanks,
Dave
Started by Randy Drysdale. Last reply by Tim Pannabecker Jan 28, 2019. 6 Replies 0 Likes
Started by jawbone. Last reply by Uncle Fred Sep 22, 2014. 7 Replies 0 Likes
Started by Cin wel. Last reply by Cin wel May 25, 2013. 4 Replies 0 Likes
Started by Mike Sibinga. Last reply by wormil Jan 12, 2013. 3 Replies 0 Likes
Started by Jillian Holladay. Last reply by wormil Jun 3, 2012. 2 Replies 2 Likes
Started by Martyn Hartley. Last reply by Martyn Hartley Apr 22, 2012. 2 Replies 0 Likes
Started by Penny Nelson. Last reply by Penny Nelson Apr 17, 2012. 4 Replies 0 Likes
Started by Waid Jones. Last reply by Steve wootten Apr 16, 2012. 2 Replies 0 Likes
Started by Matt Quinney. Last reply by Rand Moore Jul 16, 2011. 3 Replies 1 Like
Started by ukeplayer. Last reply by Steve Pollack Mar 20, 2011. 6 Replies 0 Likes
Started by Mama Mojo. Last reply by Mark Mercer Jan 26, 2011. 6 Replies 1 Like
Started by Bob Young. Last reply by Chuck Dubman Jan 23, 2011. 2 Replies 0 Likes
Started by Bob Young. Last reply by DrByte Jul 22, 2010. 3 Replies 0 Likes
Started by Wray. Last reply by Barry Evan Russ Mar 29, 2010. 21 Replies 0 Likes
Started by Alan Roberts. Last reply by Chuck Dubman Mar 27, 2010. 5 Replies 0 Likes
Started by Peter Taylor. Last reply by Pineee Johnny Feb 25, 2010. 3 Replies 0 Likes
Started by Penny Nelson. Last reply by Wichita Sam Jan 3, 2010. 1 Reply 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!