Just thinking out loud here.......

The idea of gluing a piezo inside a tuna can, or the like, and then mounting the tuna can under the bridge, open side up. Thinking being; the can will capture the vib's and add it's own coloration to the sound that the piezo is picking up. Anyone done this or have thoughts?

Views: 540

Replies to This Discussion

I did a similar thing and glued one to the inside of a tin can guitar

Sounded awsome but had a lot of feed back issues

http://darrenscigarboxguitars.blogspot.co.uk/

I tried one on the inside of a canjo and the feedback was huge. Sort of like yelling inside a shipping container.

How about mounting the piezo to the outside of the can?  

Without encapsulating the piezo in something like foam, wood, leather or possibly a thick layer of hot glue or silicone to insulate it, I think you will find it will have an oversensitivity to every little sound and be a great feedback generator.

If foaming or casing it in glue would help with feed back, then sure. Is it the vibrations bouncing within the can that cause the feed back?

Don't know if you'd get the same sound mounting it outside the can, but don't know. My thought was sparked by the sound difference of speaking with a can up to your mouth.

I don't know the in's and out's of feed back causes and and remedy's (if you have a link with info, I love to read it ) so maybe it's not do-able. I'll fart around with experiments myself when time allows, but for now I'm living vicariously though you folks.

Primary problem with piezos is they are super sensitive so any resonance tends to continue and they will pick up all sorts of sounds when you just touch the strings or box. Encasing them helps to subdue this problem. Personally I enjoy the harsher sound they give. Half of the fun is experimenting and trying new ideas on your builds. "There are no rules", have fun with your build ideas.

You're right there, the only rule is, there are no rules! I made a thin wooden sandwich for my piezo and in the bottom piece I drilled a shallow hole with a forstner bit and lay the piezo on a layer of hot glue and added another layer on top, then covered the timber in hot glue before laying the top piece of timber on it and allowing it to set. I ended up with a quite thin sandwich of timber enclosing the piezo which I used as a base for my bridge.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Piezo location

Started by Jack Noller. Last reply by CJWilky Mar 29, 2016. 9 Replies

Preamp for rod piezo?

Started by Mark Reaney. Last reply by Bruce Trappes Sep 27, 2015. 2 Replies

Tuneable water bottle bongo

Started by C Cook. Last reply by C Cook Jan 18, 2015. 4 Replies

Bass Uke set up?

Started by Tom Lauten. Last reply by Tom Lauten Jan 2, 2015. 2 Replies

Cable Piezo

Started by Seasick Mick Feb 10, 2014. 0 Replies

Piezo rezo

Started by Bert the Welder. Last reply by nailtown slim Dec 16, 2013. 7 Replies

Compressor for piezo

Started by Wade Aug 2, 2013. 0 Replies

Piezo forms and size

Started by Kevin M. Kraft. Last reply by HarleyTodd Jun 27, 2013. 5 Replies

PIEZOs - To Glue, or not to Glue....

Started by Keith Stanford. Last reply by Eric Johnson Mar 19, 2013. 1 Reply

Piezo for a wash tub bass?

Started by Tony. Last reply by Tony Feb 15, 2013. 6 Replies

Multiple Piezo Installation

Started by Redbelly. Last reply by Alan Jan 18, 2013. 9 Replies

Hoboking Standard

Started by Alan Jan 18, 2013. 0 Replies

Rod PiezoInside the Bridge

Started by Redbelly. Last reply by Redbelly Dec 19, 2012. 24 Replies

piezo between box and neck?

Started by matthew. Last reply by Mark Dec 12, 2012. 4 Replies

Piezos...extreme frustration

Started by Tim Fleischer. Last reply by Keith Stanford Dec 5, 2012. 9 Replies

Which kind of piezo to choose?

Started by Alan. Last reply by Alan Nov 6, 2012. 8 Replies

Sources for PVDF sensor cable

Started by Flatfish. Last reply by Randy S. Bretz Oct 6, 2012. 3 Replies

piezo on concrete block guitar

Started by Wade. Last reply by rusty case Oct 5, 2012. 2 Replies

Latest Activity

Taffy Evans replied to Engblom's discussion String attachment place
"Hi, yes it does have bracing, one fine cross brace. The top is Cedar about 2mm thick, so I have one…"
14 minutes ago
BrianQ. posted a status
38 minutes ago
Engblom replied to Engblom's discussion String attachment place
"Did you use any bracing when you built that guitar?"
2 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Bring it On Home to Me: 2-String Surf Chugger Cigar Box Guitar

"Know the tune Doug but forgot who done it believe one of them soul groeps like the Four Tops , or…"
2 hours ago
smilingdog1 commented on Gary O'slide's video
Thumbnail

Gary O'Slide - cigar box guitar rustic wood

"Peaceful slid guitar, sounds nice."
4 hours ago
smilingdog1 liked Gary O'slide's video
4 hours ago
Blues Frog replied to Bob Leon's discussion First time builder, getting confused with what types of boxes are best in the group Introduce Yourself!
"Bob,    Site issues. When replying sometimes the poster has to first go to the html…"
6 hours ago
BrianQ. left a comment for William B.
"Welcome back, check out the Resources tab for build/play info and join some groups located in the…"
6 hours ago
William B. liked Michael Bowlin's discussion Hello From Idaho
10 hours ago
William B. updated their profile
10 hours ago
William B. added a discussion to the group Introduce Yourself!
Thumbnail

New guy… sort of.

Hello everyone. i joined CBN almost a decade ago but never really got involved with the site. Now…See More
10 hours ago
William B. joined Cigar Box Nation's group
Thumbnail

Introduce Yourself!

We wanna know who you are! Where ya from? What'cha buildin'? This is a place for new members to…See More
10 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->