hi everyone new here and too cbg's. going to build one getting everything together. my question is can you stick the piezo between the neck and box lid under the bridge?

Views: 381

Replies to This Discussion

Hi Matthew.
Certainly you can sandwhich the piezo between the neck & bridge.
My preferred location is on the 3rd (or 4th) string side of the neck under the lid, below the bridge.
I attach the disk using silicon to give a bit of a sound cushioning/dampening.
Good luck with the build
thanks for the reply. and that is what I was thinking. just hallow out the neck a little so it sits I there flush and glue it on top And bottom with some silicone glue and then glue the neck to the lid.
Sure yah can!

and if you don't like it, you could put another one somewhere else... and run the other, or both!

There's lots of room to experiment in a search for the tone you wish to have.

Fun stuff!

Yep, carve out the neck a little so there's clearance between it and the soundboard. Brings two advantages - (1) the soundboard is freer to vibrate and should give a better general sound (2) you can fit a piezo on the underside below the bridge. Don't take off lots of wood - just enough to give a clear gap.

Try to avoid having the piezo in contact with the neck or you'll risk picking up lots of finger noise.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Piezo location

Started by Jack Noller. Last reply by CJWilky Mar 29, 2016. 9 Replies

Preamp for rod piezo?

Started by Mark Reaney. Last reply by Bruce Trappes Sep 27, 2015. 2 Replies

Tuneable water bottle bongo

Started by C Cook. Last reply by C Cook Jan 18, 2015. 4 Replies

Bass Uke set up?

Started by Tom Lauten. Last reply by Tom Lauten Jan 2, 2015. 2 Replies

Cable Piezo

Started by Seasick Mick Feb 10, 2014. 0 Replies

Piezo rezo

Started by Bert the Welder. Last reply by nailtown slim Dec 16, 2013. 7 Replies

Compressor for piezo

Started by Wade Aug 2, 2013. 0 Replies

Piezo forms and size

Started by Kevin M. Kraft. Last reply by HarleyTodd Jun 27, 2013. 5 Replies

PIEZOs - To Glue, or not to Glue....

Started by Keith Stanford. Last reply by Eric Johnson Mar 19, 2013. 1 Reply

Piezo for a wash tub bass?

Started by Tony. Last reply by Tony Feb 15, 2013. 6 Replies

Multiple Piezo Installation

Started by Redbelly. Last reply by Alan Jan 18, 2013. 9 Replies

Hoboking Standard

Started by Alan Jan 18, 2013. 0 Replies

Rod PiezoInside the Bridge

Started by Redbelly. Last reply by Redbelly Dec 19, 2012. 24 Replies

piezo between box and neck?

Started by matthew. Last reply by Mark Dec 12, 2012. 4 Replies

Piezos...extreme frustration

Started by Tim Fleischer. Last reply by Keith Stanford Dec 5, 2012. 9 Replies

Which kind of piezo to choose?

Started by Alan. Last reply by Alan Nov 6, 2012. 8 Replies

Sources for PVDF sensor cable

Started by Flatfish. Last reply by Randy S. Bretz Oct 6, 2012. 3 Replies

piezo on concrete block guitar

Started by Wade. Last reply by rusty case Oct 5, 2012. 2 Replies

Latest Activity

bemuzic commented on bemuzic's video
Thumbnail

This Song Isn't True - Busking & Live Looping w 3 String Cigar Box Guitar in St Ives, Cambs

"Thanks Digly, I was surprised when they put some money in. I do have a board with a QR code on it…"
1 hour ago
bemuzic commented on bemuzic's video
Thumbnail

This Song Isn't True - Busking & Live Looping w 3 String Cigar Box Guitar in St Ives, Cambs

"thanks Robert, ah yes I was trying out things in Power Director 20, having recently upgraded from a…"
1 hour ago
Steve Holladay posted a video

Clifftop 2022 - got a little bluezy!

These 2 stopped by my campsite beside "The Swamp" at Clifftop for a while. Turns out they are David and Nancy from Roots 2 Music.https://root2music.com/home...
4 hours ago
BrianQ. liked Doug Thorsvik's video
4 hours ago
Doug Thorsvik posted a video
4 hours ago
BrianQ. left a comment for Spencer Wadsworth
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
6 hours ago
Howard Craypool commented on Howard Craypool's photo
Thumbnail

Neck

"Thank you, where do you thing would be a good spot for the piezo, never installed one.! Thank you"
7 hours ago
Howard Craypool commented on Howard Craypool's photo
Thumbnail

Tuning head

"Yes, on this cigar box I added a canninite (pipe stone) for the nut"
7 hours ago
Diglydog commented on bemuzic's video
Thumbnail

This Song Isn't True - Busking & Live Looping w 3 String Cigar Box Guitar in St Ives, Cambs

"Nice one, Belinda.  Great to see the kids enjoying the music and giving you some cash. …"
7 hours ago
Robert Neal commented on bemuzic's video
8 hours ago
Profile IconSpencer Wadsworth, Andrew Webb, Christina La France and 4 more joined Cigar Box Nation
9 hours ago
Carl Floyd replied to Paul Craig's discussion What's on your workbench?
"I noticed that years ago on mine LP case, Taff.   I folded a piece of cloth in the area…"
10 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->