Here’s an old one that you might have forgotten about? Wood Stain from a few Pantry items:

  • Coffee- (ground)
  • Oil-(food safe)

  • I took a shallow bowl, but a deep plate will also work & poured enough Oil to saturate the Coffee.
  • Mix them around evenly with your fingers.
  • Make sure your wood is smooth & void of all splinters before applying.
  • Apply in a rubbing motion,with the direction of the grain.
  • Let dry & wipe grounds off & repeat or finish with your favorite technique.

      That’s it! Easy peasy, Old time simplicity!   Here’s what I used:

  • Lee’s Dark roast Vietnamese Coffee 
  • Trader Joe’s Premium Xtra virgin Olive oil

      WOOD USED: POPLAR

 Edit: I originally did this to show a twenty-something some simple old time techniques that really work? 

Here’s what another application looks like- 2 in total, will most likely add a coat of the Olive oil I used to finish it?

FYI:   harder woods are more resistant to this method & need more applications for darker colors, while soft woods yield darker colors?

    

Views: 228

Replies to This Discussion

Just to verify, that was only one application in the above pic?

I am gonna try this using coffee grounds. No sense 'wasting' good coffee...     worst that could happen is it doesn't work as well/I make a mess [nothing new there]/and I still get a cup 'o joe. Thanks for sharing Brian!

Make sure they’re dry, I tried moist grounds & it just made a mess, the moisture impeded the penetration of the oil & didn’t extract hardly any color? However, I have used dried spent grounds & butcher’s block oil with success, just not as dark as unused grounds. I’m only really using a few teaspoons at a time,since it’s dark,  so not a gross waste of coffee? Hope to see your results :)

Me too!  or old, cold coffee - I am also a crafter in paper & cloth & those communities make a big deal of coffee or tea as a dyeing agent for those materials so it makes sense to me. Many pigments are plant or mineral-based. Or extra fine grind? We are mad scientists/experimenters now!

So another thought... I’ve used (rubbing) alcohol with fabric dyes before on wood... high (90 odd%) alcohol... worked well in that it didn’t raise the grain... and on solid body wood (is, solid body electric, not thin soundboard... in one case, altered the color (more pinkish than intended red), but with coffee grounds, a couple applications? Then add protective finish...  Will experiment, report back.

Yes, I have been down that road before Mikala, very disappointing when they come out looking like your child's wood blocks? I liked Minwax clear base & oil pigments better,more true to color? I applied coffee only once, but I may post an edit with 2-3 applications later? 

Hmmm, guess I’ll save that for a children’s instrument build. :^)

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

The Effects of Coffee, in a good way, folks........

Started by BrianQ.. Last reply by Wilda Connell Aug 5, 2020. 7 Replies

Low Budget Sanding Tool

Started by BrianQ.. Last reply by Order99 Jun 10, 2020. 3 Replies

Nails for frets?

Started by Mike. Last reply by Alan Robinson Aug 1, 2017. 8 Replies

Flea market finds

Started by Mike Jul 24, 2017. 0 Replies

Not just a lolly stick

Started by Wade Jan 2, 2015. 0 Replies

Save that box screw up!

Started by Wade. Last reply by Thomas "Duck" Petry Dec 4, 2014. 2 Replies

CB string height gauge

Started by Wade. Last reply by Wade Jul 9, 2014. 2 Replies

Recycled stuff

Started by Keith 66 Jun 11, 2014. 0 Replies

Free recycled Piezo pickups

Started by Wade. Last reply by Rob Brighton Jul 3, 2013. 19 Replies

Joining Lumber

Started by Where's Uranus?. Last reply by Mark Lindsay Jun 4, 2013. 8 Replies

Fretboard radius

Started by Wade. Last reply by rusty case Feb 11, 2013. 1 Reply

Free grounding foil

Started by Wade Feb 10, 2013. 0 Replies

Free Fret dot markers

Started by Wade. Last reply by Mark Lindsay Feb 3, 2013. 23 Replies

Recycled tonewood

Started by rusty case. Last reply by rusty case Nov 21, 2012. 13 Replies

Low $ substitute for banjo face?

Started by rusty case. Last reply by rusty case Nov 18, 2012. 6 Replies

Cheapo strings

Started by Karl G. Siewert. Last reply by rusty case Aug 27, 2012. 4 Replies

Hand saw.

Started by Wade. Last reply by rusty case Aug 27, 2012. 2 Replies

Tennis, anyone?

Started by Order99. Last reply by Order99 Aug 18, 2012. 4 Replies

1/2 Priced Nuts and Saddles

Started by Claude. Last reply by Order99 Apr 8, 2012. 10 Replies

Latest Activity

Engblom posted discussions
2 hours ago
Uncle John commented on Randy S. Bretz's photo
Thumbnail

Butternut coverplate / tailpiece in the works

"Yup!   It shines and looks like metal.  Great stuff."
4 hours ago
Uncle John commented on Poorness Studios's video
Thumbnail

Cold Cold Heart (covered on dulcitar)

"I look for your Sunday posts every Sunday or Monday.   I like that inster munt. …"
4 hours ago
Uncle John commented on Cigar Box Nation's blog post Rest In Peace, Anonymous Pick. We Lost a Legend.
"Hey, Turtlehead and Slowpaw,  good to see you.  Pick got a lot of folks going here and he…"
5 hours ago
turtlehead commented on Cigar Box Nation's blog post Rest In Peace, Anonymous Pick. We Lost a Legend.
"Like a lot of people, pick was the first person who encouraged me when I signed up here. It meant a…"
7 hours ago
Pavel Danilov commented on Pavel Danilov's video
9 hours ago
Bernie Edwards commented on Randy S. Bretz's photo
9 hours ago
Bernie Edwards liked Randy S. Bretz's photo
9 hours ago
A.D.EKER replied to Engblom's discussion Making a Loud CBG
"Electricly ! i say Buy a BIG AMP ! acousticly ! i say use a Big Body ! the rest is up to You ! Good…"
9 hours ago
Taffy Evans commented on Randy S. Bretz's photo
17 hours ago
Taffy Evans liked Engblom's discussion Making a Loud CBG
17 hours ago
Randy S. Bretz posted a photo
18 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->