I have several, nice quality, mahogany cigar box "spacers" that are 3/4" and 5/8" square and up to 7" in length.  If you are using them for parts, what do you use them for?  I need a mahogany bridge for a vintage soprano uke I'm re-doing.  If I do a "proper" glue job, can I join two pieces to get the proper width for a bridge that will be about 1/3" in thickness or so?  It's not really a high end instrument and will use nylon uke strings. 

They are a little too nice to be using as braces, thus I'm wondering if and how you use them.

Views: 302

Replies to This Discussion

I get a lot that are very pretty clear wood, but soft..... I have thought they were clear cedar, but I could be wrong. 

Might work for a bridge with some form of hard insert. I have built a few using a fret, some with Tusq. 

If the wood isnt too soft, I dont see why glueing some together for a Uke bridge would be worth a try. But then, you can buy a finished rosewood or equiv. premade for a couple bucks too, so its kind of up to you. If you have time and prefer DYI, go for it! The experimenting is a big part of the fun.

Thanks.  I can smell no cedar aroma.  I am trying to make a bridge that is close to the original on the Regal-made Chicago uke I am fixing up.  Closest I could find is Gitty's koa bridge.  I am also installing an ebony saddle and nut (so says the Chinese maker - just went and did a "scratch test" and it looks pretty hard, just might be ebony but could be dyed rosewood as well.  Either would work well )

If that Regal is vintage or even just nice, you might want a nice hardwood bridge. 

Bunch of variations on Ebay. More on Amazon.

Stewmac has these basic bridges and these deluxe bridges.

Uke world sells these rosewood bridges.

Dont want to discourage your use of the wood you have, but I fear if its like what I have seen, it may be soft for the application.

And for what its worth, not all cedar is overly aromatic. Oddly, much of mine smells like cigar tobacco.....

Let us know whatever route you choose. Love a good uke project. (Fool that I am, I have a neck reset on a 50's soprano on my workbench now!) 

Thanks.  Seen all of those.  The original has a simple, rectangular, mahogany bridge that looks a lot like the koa one Gitty sells (I can always get that one if I don't want to make one)

After your remark, I stuck a blade into it and it's harder than it looks....good news.  I'll keep you posted.

I just cut the up and use them as corner blocks.

  I often cut similar woods into long, curved strips and glue them to lovely yet shallow boxes as a sort of 'depth extension', then pare down to match the box.

 I've also done similar to wooden tennis racquets in order to fashion sound chambers-layers of strips glued directly to the hoop until i've got a round 'box' roughly 2.5 to 3 inches deep, then file and sand a smooth 'bowl' out of it.

 But mahogany for bridges or nuts? Never tried it, though i've used everything from bone to brass to oak to heated bamboo (try cutting bamboo chopsticks to fit your strings and then 'cook' it gently-it gets hard enough to hold Marten mid-weight banjo strings without wear!). It won't hurt anything to make your bridges and/or nuts out of mahogany though...it might be fun to make the same design in Oak, Maple with Bone saddle, Rosewood with brass threaded rod etc etc etc, and just try each one in action until you get exactly the sound you want...

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

scarf joint

Started by PattJ. Last reply by smilingdog1 Sep 29, 2021. 1 Reply

I'm building a triple neck guitar and I have no idea why ..

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by A.D.EKER Aug 5, 2021. 2 Replies

Springs in the guitar? ...What gives?

Started by Danny B.. Last reply by Mikala Aug 29, 2019. 23 Replies

Single coil Pup location

Started by HarleyTodd May 8, 2019. 0 Replies

Baritone Ukulele

Started by John Hopper. Last reply by Bob Johnston Mar 28, 2017. 5 Replies

hard to play

Started by Billy Heintz. Last reply by Mark Bliss Nov 16, 2016. 9 Replies

Condenser Guitar Microphones for CBG?

Started by Danny B.. Last reply by Fomhorach Nov 10, 2016. 4 Replies

Adjustable bridges?

Started by Danny B.. Last reply by Danny B. Nov 9, 2016. 3 Replies

Accurate Drill Tricks?

Started by Danny B.. Last reply by Fomhorach Nov 9, 2016. 6 Replies

Protecting old boxes

Started by Danny B.. Last reply by Paul Craig Sep 13, 2016. 4 Replies

Cohiba box, thick top

Started by Chuck Dubman. Last reply by Danny B. Sep 13, 2016. 19 Replies

Use for mahogany cigar box "spacers"

Started by PhilUSAFRet. Last reply by Order99 Feb 7, 2016. 6 Replies

Adhesive Removal

Started by Habanera Hal. Last reply by Mad Mike's CBG's Nov 4, 2015. 8 Replies

inlays fret markers

Started by Paul Cooper. Last reply by Paul Craig Sep 16, 2015. 22 Replies

Heel shaping ideas and process

Started by 14 buck bass (aka antonio). Last reply by The Phrygian Kid Apr 20, 2015. 21 Replies

CBG neck on router table

Started by Servaas (Der Groovemeister). Last reply by Brandon Barnard Nov 22, 2013. 6 Replies

Trimming a soundboard for my upright bass

Started by Wade. Last reply by jen harrison Nov 20, 2013. 6 Replies

Blog Posts

How to add photos?

Posted by Stephen Sell on January 13, 2022 at 1:19pm 2 Comments

My first 3 string cigar box guitar

Posted by Stephen Sell on January 13, 2022 at 1:16pm 1 Comment

Shedding a Tear for Dave Lynas

Posted by Poorness Studios on December 20, 2021 at 8:30pm 4 Comments

Latest Activity

Randy S. Bretz posted photos
1 hour ago
Jim Tomsovic posted a photo
1 hour ago
Uncle John commented on Uncle John's video
Thumbnail

Roll & Tumble Blues

"Thanks, Andries, from my thumb and from me. "
2 hours ago
Kim Mosier commented on Kim Mosier's photo
Thumbnail

2DC0A094-9423-4F75-8184-5E4BA1CDF30A

"Poplar neck and fretboard. Stained fretboard. My first slotted headstock used drill chisel and…"
2 hours ago
Kim Mosier posted photos
2 hours ago
Lappy commented on Lappy's photo
Thumbnail

reso1

"The bowl is a dog food bowl I bought at the dollar store."
3 hours ago
Gary O'slide posted a video
3 hours ago
Chad McKeown liked evanmars's profile
4 hours ago
Uncle John commented on Uncle John's photo
Thumbnail

Meatloaf has died.

"Good response, Alan!"
4 hours ago
AGP # commented on Uncle John's photo
Thumbnail

Meatloaf has died.

""Bat Out of Hell", I think that's where this Covid thing started !!!"
5 hours ago
AGP # liked Uncle John's photo
5 hours ago
Keith Rearick liked BUGGY (C)'s video
6 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->