I have several, nice quality, mahogany cigar box "spacers" that are 3/4" and 5/8" square and up to 7" in length.  If you are using them for parts, what do you use them for?  I need a mahogany bridge for a vintage soprano uke I'm re-doing.  If I do a "proper" glue job, can I join two pieces to get the proper width for a bridge that will be about 1/3" in thickness or so?  It's not really a high end instrument and will use nylon uke strings. 

They are a little too nice to be using as braces, thus I'm wondering if and how you use them.

Views: 302

Replies to This Discussion

I get a lot that are very pretty clear wood, but soft..... I have thought they were clear cedar, but I could be wrong. 

Might work for a bridge with some form of hard insert. I have built a few using a fret, some with Tusq. 

If the wood isnt too soft, I dont see why glueing some together for a Uke bridge would be worth a try. But then, you can buy a finished rosewood or equiv. premade for a couple bucks too, so its kind of up to you. If you have time and prefer DYI, go for it! The experimenting is a big part of the fun.

Thanks.  I can smell no cedar aroma.  I am trying to make a bridge that is close to the original on the Regal-made Chicago uke I am fixing up.  Closest I could find is Gitty's koa bridge.  I am also installing an ebony saddle and nut (so says the Chinese maker - just went and did a "scratch test" and it looks pretty hard, just might be ebony but could be dyed rosewood as well.  Either would work well )

If that Regal is vintage or even just nice, you might want a nice hardwood bridge. 

Bunch of variations on Ebay. More on Amazon.

Stewmac has these basic bridges and these deluxe bridges.

Uke world sells these rosewood bridges.

Dont want to discourage your use of the wood you have, but I fear if its like what I have seen, it may be soft for the application.

And for what its worth, not all cedar is overly aromatic. Oddly, much of mine smells like cigar tobacco.....

Let us know whatever route you choose. Love a good uke project. (Fool that I am, I have a neck reset on a 50's soprano on my workbench now!) 

Thanks.  Seen all of those.  The original has a simple, rectangular, mahogany bridge that looks a lot like the koa one Gitty sells (I can always get that one if I don't want to make one)

After your remark, I stuck a blade into it and it's harder than it looks....good news.  I'll keep you posted.

I just cut the up and use them as corner blocks.

  I often cut similar woods into long, curved strips and glue them to lovely yet shallow boxes as a sort of 'depth extension', then pare down to match the box.

 I've also done similar to wooden tennis racquets in order to fashion sound chambers-layers of strips glued directly to the hoop until i've got a round 'box' roughly 2.5 to 3 inches deep, then file and sand a smooth 'bowl' out of it.

 But mahogany for bridges or nuts? Never tried it, though i've used everything from bone to brass to oak to heated bamboo (try cutting bamboo chopsticks to fit your strings and then 'cook' it gently-it gets hard enough to hold Marten mid-weight banjo strings without wear!). It won't hurt anything to make your bridges and/or nuts out of mahogany though...it might be fun to make the same design in Oak, Maple with Bone saddle, Rosewood with brass threaded rod etc etc etc, and just try each one in action until you get exactly the sound you want...

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

I'm building a triple neck guitar and I have no idea why ..

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Lonman on Sunday. 3 Replies

scarf joint

Started by PattJ. Last reply by smilingdog1 Sep 29, 2021. 1 Reply

Springs in the guitar? ...What gives?

Started by Danny B.. Last reply by Mikala Aug 29, 2019. 23 Replies

Single coil Pup location

Started by HarleyTodd May 8, 2019. 0 Replies

Baritone Ukulele

Started by John Hopper. Last reply by Bob Johnston Mar 28, 2017. 5 Replies

hard to play

Started by Billy Heintz. Last reply by Mark Bliss Nov 16, 2016. 9 Replies

Condenser Guitar Microphones for CBG?

Started by Danny B.. Last reply by Fomhorach Nov 10, 2016. 4 Replies

Adjustable bridges?

Started by Danny B.. Last reply by Danny B. Nov 9, 2016. 3 Replies

Accurate Drill Tricks?

Started by Danny B.. Last reply by Fomhorach Nov 9, 2016. 6 Replies

Protecting old boxes

Started by Danny B.. Last reply by Paul Craig Sep 13, 2016. 4 Replies

Cohiba box, thick top

Started by Chuck Dubman. Last reply by Danny B. Sep 13, 2016. 19 Replies

Use for mahogany cigar box "spacers"

Started by PhilUSAFRet. Last reply by Order99 Feb 7, 2016. 6 Replies

Adhesive Removal

Started by Habanera Hal. Last reply by Mad Mike's CBG's Nov 4, 2015. 8 Replies

inlays fret markers

Started by Paul Cooper. Last reply by Paul Craig Sep 16, 2015. 22 Replies

Heel shaping ideas and process

Started by 14 buck bass (aka antonio). Last reply by The Phrygian Kid Apr 20, 2015. 21 Replies

CBG neck on router table

Started by Servaas (Der Groovemeister). Last reply by Brandon Barnard Nov 22, 2013. 6 Replies

Trimming a soundboard for my upright bass

Started by Wade. Last reply by jen harrison Nov 20, 2013. 6 Replies

Blog Posts

"Little Fish" Project

Posted by Steve Bookout on January 22, 2022 at 11:12pm 0 Comments

How to add photos?

Posted by Stephen Sell on January 13, 2022 at 1:19pm 4 Comments

Shedding a Tear for Dave Lynas

Posted by Poorness Studios on December 20, 2021 at 8:30pm 4 Comments

Latest Activity

Taffy Evans replied to Mel Cooke's discussion Is it OK to use a hardtail bridge on a fretless 3 string acoustic?
"Hey Carl, I modified the computer chair. Haha. Taff"
1 hour ago
Taffy Evans replied to Mel Cooke's discussion Is it OK to use a hardtail bridge on a fretless 3 string acoustic?
"Hi Cindy, the answer could be in my post earlier, above. Even a bigger issue if nylon uke strings…"
1 hour ago
AGP # liked Troy Eckstein's photo
1 hour ago
AGP # liked Randy S. Bretz's photo
1 hour ago
AGP # liked Randy S. Bretz's photo
1 hour ago
AGP # liked Jim Tomsovic's photo
1 hour ago
Cindy J updated their profile
2 hours ago
Cindy J commented on Stephen Sell's blog post How to add photos?
"I wanted to test the photo uploading process...this was the first pic I found on my computer..."
2 hours ago
Cindy J commented on Stephen Sell's blog post How to add photos?
2 hours ago
Cindy J commented on Stephen Sell's blog post My first 3 string cigar box guitar
"where are the pics Stephen?"
2 hours ago
Cindy J replied to Mel Cooke's discussion Is it OK to use a hardtail bridge on a fretless 3 string acoustic?
"I have a cigar box ukulele that someone made for me with a tailpiece like that and it is not…"
2 hours ago
Tres Seaver and Jack Bo are now friends
2 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->