Hey all,

 

building an upright bass out of a large drawer. Making the soundboard out of the thin plywood skin of an old hollow core door. I don't really want to use a router to make the top flush with the box. What do you suggest to get a nice edge on the soundboard and sides? Remember. it's a plywood top!

 

Thanks,

 

Wade

Views: 485

Replies to This Discussion

It does have straight sides- that could work. Thanks.

 

Wade

I missed this one, sorry

I assume you are meaning you want to hide the edge of the plywood, but without routing to fit it flush in a step?

This could be done with binding but you indicate you dont want to route it, or maybe dont have access to equipment to route it, or maybe you are just looking for a low-tech way to clean up the build.

One way might be to recess the top by glueing in strips inside the sides and carefully fitting and setting the top slightly below flush, then sand/scrape the sides down flush to the top, but it would be a fairly difficult solution to pull off with limited woodworking tools and have a nice gap-free result.

Bears idea for using some small corner trim is interesting, and would work on straight sides with basic mitered corners.

How about a band of some kind of decorative paper tape, similar to paper covered cigar boxes? That could have an interesting result. Make it look like a giant cigar box!

 

Keep us posted on the results, I am interested in upright bass solutions!

Mark

 

I have been considering using a door for guitar top/ back pieces... happy to find this post and the ideas to handle the edges.

You're making a top for your box? If you're not going to use a router, I would just cut it to fit, then sand down the edges. Use blocks on the inside to brace it. A real upright would have a bass bar on the left (facing the bass) and a soundpost on the right to let the bridge transmit vibration to the back. The bridge would float, instead of being attached to the soundboard. I've got a little bridge I made by hand to use on my wine box bass, but the action ended up being too high.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Adhesive Removal

Started by Habanera Hal. Last reply by Fantacone Box Works Mar 12. 9 Replies

Accurate Drill Tricks?

Started by Danny B.. Last reply by Fantacone Box Works Mar 12. 7 Replies

scarf joint

Started by PattJ. Last reply by Fantacone Box Works Mar 12. 2 Replies

I'm building a triple neck guitar and I have no idea why ..

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Wichita Sam Feb 11. 4 Replies

Springs in the guitar? ...What gives?

Started by Danny B.. Last reply by Mikala Aug 29, 2019. 23 Replies

Single coil Pup location

Started by HarleyTodd May 8, 2019. 0 Replies

Baritone Ukulele

Started by John Hopper. Last reply by Bob Johnston Mar 28, 2017. 5 Replies

hard to play

Started by Billy Heintz. Last reply by Mark Bliss Nov 16, 2016. 9 Replies

Condenser Guitar Microphones for CBG?

Started by Danny B.. Last reply by Fomhorach Nov 10, 2016. 4 Replies

Adjustable bridges?

Started by Danny B.. Last reply by Danny B. Nov 9, 2016. 3 Replies

Protecting old boxes

Started by Danny B.. Last reply by Paul Craig Sep 13, 2016. 4 Replies

Cohiba box, thick top

Started by Chuck Dubman. Last reply by Danny B. Sep 13, 2016. 19 Replies

Use for mahogany cigar box "spacers"

Started by PhilUSAFRet. Last reply by Order99 Feb 7, 2016. 6 Replies

inlays fret markers

Started by Paul Cooper. Last reply by Paul Craig Sep 16, 2015. 22 Replies

Heel shaping ideas and process

Started by 14 buck bass (aka antonio). Last reply by The Phrygian Kid Apr 20, 2015. 21 Replies

CBG neck on router table

Started by Servaas (Der Groovemeister). Last reply by Brandon Barnard Nov 22, 2013. 6 Replies

Trimming a soundboard for my upright bass

Started by Wade. Last reply by jen harrison Nov 20, 2013. 6 Replies

Blog Posts

Let’s talk Aeolian…

Posted by BrianQ. on August 27, 2022 at 12:05am 0 Comments

Building a Violin w/ GITTY Parts

Posted by Brad Craig on August 11, 2022 at 6:39pm 3 Comments

Effects Pedals

Posted by Trey Allensworth on May 26, 2022 at 10:04am 12 Comments

Latest Activity

AGP # liked Randy S. Bretz's photo
32 minutes ago
AGP # liked BUGGY (C)'s video
33 minutes ago
Randy S. Bretz posted a photo

Just the coverplate and strings yet!

Had to replace the piezo cable with a piezo rod. Bad cable!
37 minutes ago
Infirmity Citrus President replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
"I was thinking, buy it, add two necks, tune one each EBE, DAD, and DGD. This is Soviet era, so not…"
51 minutes ago
BUGGY (C) posted a video

Swampy Resurrection - (The journey)

Finding the Swampy again... I did a similar video yesterday but it strangely deleted itself as all strange things that happen whjen you pull out your swampwi...
54 minutes ago
Infirmity Citrus President replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
55 minutes ago
BUGGY (C) replied to the anonymous pick's discussion SWAMP WITCH GUITARS UNDER NEW OWNERSHIP
"But what about the genuine Swimpwatch carboard knockoffs copies!. Hey Pick end of an era man, I…"
1 hour ago
Doug Thorsvik commented on Poorness Studios's video
Thumbnail

Make a 2-string Chugger from a 30" Canoe Paddle!

"If you get a hankering to do it sometime, just let me know. I have more fishing line than I will…"
6 hours ago
Doug Thorsvik commented on Poorness Studios's video
Thumbnail

Make a 2-string Chugger from a 30" Canoe Paddle!

"You are correct Kale, you need longer scale lengths for fishing line to get low notes. For a…"
6 hours ago
Jerry Draper left a comment for BrianQ.
"Thank you"
7 hours ago
Uncle John commented on Steve Holladay's video
Thumbnail

Jacob Barker Music Festival Guitar

"Sounds bluesy good to me!"
8 hours ago
Uncle John commented on Poorness Studios's video
8 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->