I am having trouble with round fret markers. 
When I drill the circle the wood tears out and ruins the fret board.  I am replacing one now because of this.  A round punch would be ideal if there is such a thing.  Any advise?

Views: 1734

Replies to This Discussion

I like big dots, so I use  a 3/8" forstner bit to make my dot holes - though 1/4" is probably closer to the norm.  I make the dots with 3/8" and 1/4" plug cutters.

Yes, I was using regular drill bits. Thanks, the forstner bits seem to leave a clean hole for the dots.  I tried it on my old fingerboard and it worked well. I was about to give up on dots, but they are so much better with the forstner bits, that I will continue to use them.

drilling marker holes.


Nice.  Where did u get your plug cutter?  jh

I think I got both the plug cutter and forstner bit at Home Depot. But you can easily find then elsewhere too.


Good replies by all!

For smaller holes, you might try a quality brad-point drill bit for similar results.

Another option for marker material is common plastic rod in lengths of white or black, available from luthier suppliers.

Common twist drills are generally a poor choice for use in wood. I generally only use them for things like small screw holes or starter holes where the tear out or rough edge will be covered or hidden.



Never thought of the plastic rods.  Who has them and what size are available.  I was going to try the abalone shell  5 mm size but the plastic rod sounds like a good possibility.  Thanks for the idea, Mark

I know StewMac sells the small ones for side dot markers.  I have not tried it myself, but I know that people have used plastic chopsticks for the fboard dots. The ones from PF Chang's are supposed to be particularly good. Another option is to punch some dots out of guitar picks. You can get some cool patterns in tortoise shell, pearloid, etc. that way.

That too is a good idea, what do you use for a punch?

Just a regular paper hole punch from an office supply store. Thin picks are easiest, but you can punch through a medium pick if you've got a strong grip. I agree with MBliss; side fret position markers are probably more important than the fret board dots. Unless you are playing a lap, the side of the neck is usually the part you are looking at while playing. 

On my builds, I just drill shallow holes in the side of the fboard and fill them with either white or dark-tinted wood filler, then sand them flush. Super quick & easy.

I'll try that, a paper punch.  Wood filler another possibility.  Thanks.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

I'm building a triple neck guitar and I have no idea why ..

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Lonman on Sunday. 3 Replies

scarf joint

Started by PattJ. Last reply by smilingdog1 Sep 29, 2021. 1 Reply

Springs in the guitar? ...What gives?

Started by Danny B.. Last reply by Mikala Aug 29, 2019. 23 Replies

Single coil Pup location

Started by HarleyTodd May 8, 2019. 0 Replies

Baritone Ukulele

Started by John Hopper. Last reply by Bob Johnston Mar 28, 2017. 5 Replies

hard to play

Started by Billy Heintz. Last reply by Mark Bliss Nov 16, 2016. 9 Replies

Condenser Guitar Microphones for CBG?

Started by Danny B.. Last reply by Fomhorach Nov 10, 2016. 4 Replies

Adjustable bridges?

Started by Danny B.. Last reply by Danny B. Nov 9, 2016. 3 Replies

Accurate Drill Tricks?

Started by Danny B.. Last reply by Fomhorach Nov 9, 2016. 6 Replies

Protecting old boxes

Started by Danny B.. Last reply by Paul Craig Sep 13, 2016. 4 Replies

Cohiba box, thick top

Started by Chuck Dubman. Last reply by Danny B. Sep 13, 2016. 19 Replies

Use for mahogany cigar box "spacers"

Started by PhilUSAFRet. Last reply by Order99 Feb 7, 2016. 6 Replies

Adhesive Removal

Started by Habanera Hal. Last reply by Mad Mike's CBG's Nov 4, 2015. 8 Replies

inlays fret markers

Started by Paul Cooper. Last reply by Paul Craig Sep 16, 2015. 22 Replies

Heel shaping ideas and process

Started by 14 buck bass (aka antonio). Last reply by The Phrygian Kid Apr 20, 2015. 21 Replies

CBG neck on router table

Started by Servaas (Der Groovemeister). Last reply by Brandon Barnard Nov 22, 2013. 6 Replies

Trimming a soundboard for my upright bass

Started by Wade. Last reply by jen harrison Nov 20, 2013. 6 Replies

Blog Posts

"Little Fish" Project

Posted by Steve Bookout on January 22, 2022 at 11:12pm 0 Comments

How to add photos?

Posted by Stephen Sell on January 13, 2022 at 1:19pm 2 Comments

My first 3 string cigar box guitar

Posted by Stephen Sell on January 13, 2022 at 1:16pm 1 Comment

Shedding a Tear for Dave Lynas

Posted by Poorness Studios on December 20, 2021 at 8:30pm 4 Comments

Latest Activity

BrianQ. left a comment for Sam Harrelson
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
1 hour ago
BrianQ. left a comment for Terry
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
1 hour ago
Carl Floyd replied to Mel Cooke's discussion Is it OK to use a hardtail bridge on a fretless 3 string acoustic?
"Won't hurt to try it.  You may be surprised. I built this one just to use in my computer…"
1 hour ago
Rope Walker Country Star left a comment for A.D.EKER
"Greets ADEker! Nice to hear from you. No Radio Shows for a while. I been workin tryin to stay ahead…"
2 hours ago
Uncle John commented on T-Gripped's photo

1st CBG of 2022

"That is a beauty."
3 hours ago
Uncle John commented on T-Gripped's photo

Cohiba 3-string

"Yup. He says that about this one. Dave Lynas would approve."
3 hours ago
Uncle John commented on T-Gripped's photo

Cohiba 3-string

"Great box. Simple, elegant, old schoool."
3 hours ago
Uncle John posted a photo
4 hours ago
Profile IconTerry and Sam Harrelson joined Cigar Box Nation
4 hours ago
Jerry Jordan commented on T-Gripped's photo

Cohiba 3-string

""High 9's" as UJ would say, looks real nice!"
6 hours ago
3 String Blues posted a photo

Box Guitar Blues

---------------------I am editing new photos for the websiteat…
8 hours ago
the anonymous pick commented on T-Gripped's photo

Cohiba 3-string

"Cohibas are such nice boxes ;-)  good stuff. "
11 hours ago


© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->