*Very* decent quality, 5/16" thick solid cedar top.  Sounds nice on my box tester, good volume, wonder if dishing out the back 1/16" or 1/8" would make it louder?

Views: 2344

Replies to This Discussion

Chuck,

 

Gorgeous box!

 

If you have the capability to do a "TV rout" (you know, like an old style TV screen with rounded corners), dishing it out on the backside to 1/8"final  thickness should improve the vibe characteristics of that top as a soundboard wonderfully. Is this gonna be an acoustic, or an acoustic-electric build? On your builds, do you do neck-throughs or bolt-ons? If neck-throughs, do you screw the top to the neck at the bridge and neck-set ends? Only reason I ask is that would determine how close you get to the edge with your router bit.

 

Are you comfortable removing that much material for a 1/8" final thickness? I don't dare to suggest you go to a 1/16" final thickness, since you might feel like you'd have to brace it - and 1/32" final thickness, I think you'd definitely need bracing. Plus the discomfort of cutting that deep into such a fine chunk of wood - one slip, and "Oh, SH****T!"

 

Louder (more volume) will also come from sound hole design and placement. What are your thoughts on that for this build?

 

Can't wait to see what you do with it. Would it, p'r'aps, we wonders, my precious, be for sale? ;-)

What is this "Box tester" you are talking about?


Der Groovemeister said:
What is this "Box tester" you are talking about?


OMG wonderful idea.

That is amazingly clever!
Gooseneck scraper, no jigs, no setup.  Check depth with a straightedge and a slim taper of wood, like half of a clothes pin.  3/16" min. top thickness. This'll be bolt-on, lets me use a shorter neck blank.  Electric-acoustic, using prewired Strat harness.  Stylized F-holes, shame to hide that nice solid cedar under grommets.

Oily "Strat-O'-Nine-Tales" Fool said:

Chuck,

 

Gorgeous box!

 

If you have the capability to do a "TV rout" (you know, like an old style TV screen with rounded corners), dishing it out on the backside to 1/8"final  thickness should improve the vibe characteristics of that top as a soundboard wonderfully. Is this gonna be an acoustic, or an acoustic-electric build? On your builds, do you do neck-throughs or bolt-ons? If neck-throughs, do you screw the top to the neck at the bridge and neck-set ends? Only reason I ask is that would determine how close you get to the edge with your router bit.

 

Are you comfortable removing that much material for a 1/8" final thickness? I don't dare to suggest you go to a 1/16" final thickness, since you might feel like you'd have to brace it - and 1/32" final thickness, I think you'd definitely need bracing. Plus the discomfort of cutting that deep into such a fine chunk of wood - one slip, and "Oh, SH****T!"

 

Louder (more volume) will also come from sound hole design and placement. What are your thoughts on that for this build?

 

Can't wait to see what you do with it. Would it, p'r'aps, we wonders, my precious, be for sale? ;-)

Chuck,

 

Thanks for the detail. 3/16" is how thick my plywood soundboard tops are, and they resonate pretty well. Sounds like it's gonna be a lovely build.

Try this at home...

Rodney,

Nii-iice!!!! Struts and routing out all in one. That's the idea...
Would look kinda cool installed inside out.
Yeah, kinda Steampunkish.
What are the effects of simply dropping the tuning a step, third, fifth, octave, etc?

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Adhesive Removal

Started by Habanera Hal. Last reply by Fantacone Box Works Mar 12. 9 Replies

Accurate Drill Tricks?

Started by Danny B.. Last reply by Fantacone Box Works Mar 12. 7 Replies

scarf joint

Started by PattJ. Last reply by Fantacone Box Works Mar 12. 2 Replies

I'm building a triple neck guitar and I have no idea why ..

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Wichita Sam Feb 11. 4 Replies

Springs in the guitar? ...What gives?

Started by Danny B.. Last reply by Mikala Aug 29, 2019. 23 Replies

Single coil Pup location

Started by HarleyTodd May 8, 2019. 0 Replies

Baritone Ukulele

Started by John Hopper. Last reply by Bob Johnston Mar 28, 2017. 5 Replies

hard to play

Started by Billy Heintz. Last reply by Mark Bliss Nov 16, 2016. 9 Replies

Condenser Guitar Microphones for CBG?

Started by Danny B.. Last reply by Fomhorach Nov 10, 2016. 4 Replies

Adjustable bridges?

Started by Danny B.. Last reply by Danny B. Nov 9, 2016. 3 Replies

Protecting old boxes

Started by Danny B.. Last reply by Paul Craig Sep 13, 2016. 4 Replies

Cohiba box, thick top

Started by Chuck Dubman. Last reply by Danny B. Sep 13, 2016. 19 Replies

Use for mahogany cigar box "spacers"

Started by PhilUSAFRet. Last reply by Order99 Feb 7, 2016. 6 Replies

inlays fret markers

Started by Paul Cooper. Last reply by Paul Craig Sep 16, 2015. 22 Replies

Heel shaping ideas and process

Started by 14 buck bass (aka antonio). Last reply by The Phrygian Kid Apr 20, 2015. 21 Replies

CBG neck on router table

Started by Servaas (Der Groovemeister). Last reply by Brandon Barnard Nov 22, 2013. 6 Replies

Trimming a soundboard for my upright bass

Started by Wade. Last reply by jen harrison Nov 20, 2013. 6 Replies

Latest Activity

Papa D posted photos
1 hour ago
Papa D commented on Papa D's photo
Thumbnail

Lunchbox

"Also have a fender lunch pale, they have some kool one's out now"
1 hour ago
Papa D commented on Papa D's photo
Thumbnail

Ashton

"Thanx Guys, Tru Oil at it's best, love the aston box's."
1 hour ago
bemuzic commented on bemuzic's video
Thumbnail

Outtakes from a gusty busk!!

"thanks Poorness, it kept me on my toes!"
4 hours ago
BrianQ. left a comment for Jesús Pavón Díaz Pavon
4 hours ago
Poorness Studios liked Randy S. Bretz's video
4 hours ago
Jesús Pavón Díaz Pavon is now a member of Cigar Box Nation
4 hours ago
Lappy commented on Lappy's photo
Thumbnail

rezzo 7

"Thank you kindly Brian!"
7 hours ago
bemuzic commented on bemuzic's video
Thumbnail

Outtakes from a gusty busk!!

"thanks Doug and AGP, it was a pretty good day between the gusts!"
10 hours ago
BrianQ. liked Doug Thorsvik's video
11 hours ago
Taffy Evans replied to Infirmity Citrus President's discussion Is there a way to remove tobacco smell from cigar boxes?
"Haha, I recon your cigar box would smell better than your amp, especially after it warms up. Taff"
12 hours ago
Bernie Edwards liked Lappy's photo
12 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->