I'm curious to know if anybody uses a router table for making a neck. The rounding off of the backside is easy, but how do i carve away the wood on top for creating a headstock? I used to do that with hammer and chisel, but now that i've got a router table, i want to use it!

Views: 989

Replies to This Discussion

So are you carving the neck/headstock out of one big chunk of wood rather than gluing it up? Either way, seems like it would be easier to saw the shape rather than router it.

I've used my Dremel with the hand router attachment to rough out the recessed headstock and it worked pretty good for a quick job.  I strongly recommend sticking the neck in a vice, clamp, or jig to keep things steady.  Afterwards, sand or file all the rough bits out.  Practice on some scrap first until you get the steady hand.  But, if you're using a table router, that should make things easier.  Just grip it and rip it! 

Patterns and a pattern bit for profiles and tapers. Usually scarfed headstocks. Hand shaped and rounded backs.

Its generally only worth the trouble to set up a router table to me if I am building several similar necks at a time. But then I have a few basic patterns and a small router table set up just for this kind of thing all the time.

I've found a way. Clamping the neck to a piece of wood i screwed to the angle slider (i don't know how it's called) on the router table and removing the back plate, i can rout out at 90 degrees angle.

The router can also be used to cut the slot (or slots) of a single (or double) slotted headstock. Begin by using a drill press to drill holes at either end of the slot(s) and then when using the router table, cut it out using multiple passes of the router, cutting out maybe 1/4" worth of material at a time. Between passes, power down the router, adjust the router bit up another 1/4" and do the next pass. Also, when starting and stopping a pass, you have to be really careful about placing your workpiece over the bit or it might tear out a cut where you didn't want it. It's best to turn off the router and let it quit spinning the bit before lifting the work piece off the router bit. Takes longer, but it keeps you from messing up your work piece. It's also best to set up a guide ("fence"?) with a stop positioned so that you can't push the work piece beyond the point where your cut should end. The guide (fence) should be positioned at right angles to the router table so when you feed the work piece to the router, it will cut a straight slot.

-Rand

(Now a summer-time machine automated wood worker)

Here is how I do it,

 

Start with 32'' x 1.5''x 3'' oak from Home Depot.

 

with a 1/2 round I remove 5'' of material to create the headstock. I remove 3/8~1/4'' each pass until the headstock is the right width. Use double sided tape (not the foam kind) to attach the neck to a larger block of wood or a jig for stability.

Cut out the profile on the bandsaw, change router bits, round the corners, sand and done!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Adhesive Removal

Started by Habanera Hal. Last reply by Fantacone Box Works Mar 12. 9 Replies

Accurate Drill Tricks?

Started by Danny B.. Last reply by Fantacone Box Works Mar 12. 7 Replies

scarf joint

Started by PattJ. Last reply by Fantacone Box Works Mar 12. 2 Replies

I'm building a triple neck guitar and I have no idea why ..

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Wichita Sam Feb 11. 4 Replies

Springs in the guitar? ...What gives?

Started by Danny B.. Last reply by Mikala Aug 29, 2019. 23 Replies

Single coil Pup location

Started by HarleyTodd May 8, 2019. 0 Replies

Baritone Ukulele

Started by John Hopper. Last reply by Bob Johnston Mar 28, 2017. 5 Replies

hard to play

Started by Billy Heintz. Last reply by Mark Bliss Nov 16, 2016. 9 Replies

Condenser Guitar Microphones for CBG?

Started by Danny B.. Last reply by Fomhorach Nov 10, 2016. 4 Replies

Adjustable bridges?

Started by Danny B.. Last reply by Danny B. Nov 9, 2016. 3 Replies

Protecting old boxes

Started by Danny B.. Last reply by Paul Craig Sep 13, 2016. 4 Replies

Cohiba box, thick top

Started by Chuck Dubman. Last reply by Danny B. Sep 13, 2016. 19 Replies

Use for mahogany cigar box "spacers"

Started by PhilUSAFRet. Last reply by Order99 Feb 7, 2016. 6 Replies

inlays fret markers

Started by Paul Cooper. Last reply by Paul Craig Sep 16, 2015. 22 Replies

Heel shaping ideas and process

Started by 14 buck bass (aka antonio). Last reply by The Phrygian Kid Apr 20, 2015. 21 Replies

CBG neck on router table

Started by Servaas (Der Groovemeister). Last reply by Brandon Barnard Nov 22, 2013. 6 Replies

Trimming a soundboard for my upright bass

Started by Wade. Last reply by jen harrison Nov 20, 2013. 6 Replies

Latest Activity

Profile IconHayden Burchell, Paul Jordan, Pete Asselin and 1 more joined Cigar Box Nation
1 hour ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Pharoah Pharoah: 2-String Chugger Cigar Box Guitar

"Glad to hear it Uncle John! Something a little different."
1 hour ago
Uncle John commented on Randy S. Bretz's photo
Thumbnail

Paduak heel carving

"HA!   I like your face."
3 hours ago
Uncle John commented on Randy S. Bretz's photo
Thumbnail

Working on peghead wings

"On the way to outstanding."
3 hours ago
Uncle John commented on Danny Gordon's video
Thumbnail

All My Loving and Yellow Submarine on the Lap harp

"Cool, Dany.  That sounds great!"
3 hours ago
Uncle John commented on Doug Thorsvik's video
3 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Pharoah Pharoah: 2-String Chugger Cigar Box Guitar

"Thanks Kale! The teens really liked doing this one and the classic Louis Louis rhythmic chord…"
13 hours ago
Taffy Evans replied to Patrick Kelly's discussion Proof is in the Tuner
"Hi Patrick, thanks for the update. Yes, you are correct in saying that small tuning imperfections…"
16 hours ago
Doug Thorsvik commented on Rich's photo
Thumbnail

3 guys CBG back

"I’m on to your album tricks Rich! ;)"
17 hours ago
Doug Thorsvik commented on Rich's photo
Thumbnail

3 guys CBG Front

"Fantastic artwork as always Rich!"
17 hours ago
Doug Thorsvik commented on Rich's photo
Thumbnail

3 guys CBG head stock Front

"Signature headstock! Lookin’ good Rich."
17 hours ago
AGP # liked Randy S. Bretz's photo
17 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->