I have been experimenting with simple resonators but did not want to sacrifice the straight through neck that most cigar box guitars have.

So far I have experimented with simple tin can lid under the bridge, I have been quite pleased with the results but wounded if other people have had success with other methods ?

There is a link to my blog below which covers some stuff on resonators, plus some pics

Views: 1344

Replies to This Discussion

Haven't built mine yet, but plan on using 3/4" bracing inside box for screw on neck, then along the bottom under the cone, then up the bottom. good luck

How does your can in a box work?  I mean, is it an improvement over the bridge setting on the face of your CBG?

I have built my first Dbo, simple as possible, so I can learn from the ground, up.

then I complicated it... to pump up the volume!  lol

Built on a 1 x 2 strip trimmed off an old concrete form-board, I'm using a tabasco bottle for the nut. It's sits on a sled, which is a notched wedge, for sliding to adjust the pitch of the string.

I began with a tuna can and a rib-bone cutoff for the bridge.  It is cut for the inner-most circle which also shows on your can.

The bone did not work well.

I replaced it with a rectangle scrap cut from an old piece of parquet flooring. abt 5/8 x 1", standing upright.

It sounds much better.  More projection.....

Still, not enough presence.

...You have your steel rod sitting on the rim of the can...

Have you tried it with the rod sitting down in the center part of the can?




Sorry only just noticed this post some how ?

The rod is actually aluminium but it does not make much difference.

All it is really is a tin lid under the bridge I guess it resonates in sympathy when the string is struck and makes a noise, it s not as loud as a real resonator but it adds a metallic element to the sound.

I had a bit more luck with a golden syrup tin lid on another build.

They seam to have a sweet spot and I had to fiddle about with it, getting it  into a position where it seamed to ring out. If I take the lid of the guitar sound changes so it must add something 

When I first made one I made a recording of a guitar with it on and than one with it off, I will see if I can find it or maybe make another

Anyway sorry about the delay I hope your build turned out ok, maybe put a pic up ?

Buy my guitars on line



With your desire to stay with a simple neck through design, a paint can lid (or other can lid) is a good choice.  I have build several can lid CBG and they work great.   Although it can be a little hard to get CBs large enough to use lids from gallon cans, lids from quart cans are almost as loud.


Your build does something that I wouldn't do.  It sets the bridge on the rim of the lid and not out in the middle of the lid.  On such a small lid it's probably more difficult to do.  Setting the bridge in the middle of the lid makes it louder and if you are looking for a banjo'y sound it is the ticket on a gallon lid.


the best,



Thanks sam some good info there

looking out for a tin can lid now !

Down towards the bottom of this page are my 3 coffee can resonators


The 1st 2 are a little rough but I i'm happy with the way #3 came out

The single coils are under the can, i'm guessing 3/8" away, they pick up the can vibrations.

The first 2 have slightly different cans, with a marked difference in sound

Most people don't recommend using poplar,but a few of my early builds are several years old and the necks are still straight, and thats without the addition of a fret board which i now use.

Thanks a lot for posting Jeff

Having a good look a them now

Nice blog page Jeff. I enjoyed your quality pictures


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

License Plate Resonator CBG

Started by Wyndell Ferguson. Last reply by T-Gripped Aug 31, 2018. 4 Replies

Morphing an El Cheapo 6-string into a reso

Started by T-Gripped. Last reply by PhilUSAFRet Jul 27, 2016. 1 Reply

My first reso

Started by Hillbilly Jeff. Last reply by Hillbilly Jeff Jan 4, 2016. 2 Replies

tin plate

Started by Mal Chilvers Oct 27, 2015. 0 Replies

full sized resso

Started by Mal Chilvers. Last reply by PhilUSAFRet Mar 23, 2014. 1 Reply

Help amplifying first reso build

Started by James Shelton. Last reply by jawbone Oct 28, 2013. 3 Replies

First Reso Build

Started by The Capo Kid. Last reply by jawbone Jul 31, 2013. 15 Replies

Spinning own reso' cones.

Started by Graham Alibone. Last reply by Graham Alibone May 17, 2013. 6 Replies

Very basic resonators

Started by Darren Wolbold. Last reply by HarleyTodd Apr 14, 2013. 8 Replies

Resonator Documentary

Started by Wade. Last reply by Dion Bilalis Feb 20, 2013. 1 Reply

first resonator

Started by Mal Chilvers. Last reply by Robert Rowe Aug 26, 2012. 5 Replies

Piezo or magnetic pickup?

Started by David Tutterrow GutBucketGuitars. Last reply by rusty case Aug 22, 2012. 2 Replies

win e box deapth

Started by Mal Chilvers. Last reply by Alan Hodges Mar 6, 2012. 2 Replies

Antique Fruit Cake Tin Resonator Guitar (Sort of)

Started by Bob Lumpkin. Last reply by Bob Lumpkin Jan 20, 2012. 12 Replies

Cone Size

Started by Jake W. Last reply by Rand Moore Jul 19, 2011. 1 Reply

Resonator that small - makes it any sense?

Started by Seaman Jay. Last reply by Habanera Hal Jul 4, 2011. 8 Replies

Anyone Else Building Homemade Electric Resonators?

Started by Mike Leeworthy. Last reply by Gadsden Guitars May 4, 2011. 16 Replies

magnetic pickups and resonator guitars.

Started by Tim Gale. Last reply by Johnny Swank May 3, 2011. 2 Replies


Started by Gobi. Last reply by Gobi Nov 3, 2009. 2 Replies

Resonator 101...Where do I start?

Started by Pass the Ammo. Last reply by Tuskmountain Oct 23, 2009. 10 Replies

Latest Activity

Brian Fink posted photos
1 minute ago
Uncle John commented on Fantacone Box Works's photo

Latest amp build

"VERY nice!"
13 minutes ago
Uncle John commented on Fantacone Box Works's photo


"Classy good."
14 minutes ago
Uncle John commented on T-Gripped's photo

Tuna Can Reso Hobo Fiddle

"Oh, that is a little git.  Cute kid and pic."
14 minutes ago
Uncle John commented on T-Gripped's photo

Tuna Can Reso Hobo Fiddle

"You nailed it.  Looks like it should be in the and of a bo'   sitting in the…"
15 minutes ago
Uncle John commented on Vladimir Mazic's photo

My first CBG

"Looks great!  Very advanced."
18 minutes ago
A.D.EKER commented on A.D.EKER's video

Carolina Hardcore Ecstacy F Zappa (Tribute By ) A D Eker 2022

"Thanks Uncle ! believe he is upthere having a great time ,looking down on the Nation's …"
18 minutes ago
Uncle John commented on Dar Stellabotta's video

Wild Dog Dingo Stomp Box!

"Cool and a nice size.  Really adds to the music."
20 minutes ago
Uncle John commented on A.D.EKER's video

Carolina Hardcore Ecstacy F Zappa (Tribute By ) A D Eker 2022

"That tenor sounds RICH!    A lot of work and ART in this one, Andries,  Old Dave…"
22 minutes ago
A.D.EKER commented on Taffy Evans's video

Results of a Banjo to Mandolin Conversion

"You can hear the Mix quit nicely  the ringie mandolin sound and the percussif  banjo…"
23 minutes ago
A.D.EKER commented on A.D.EKER's video
33 minutes ago
A.D.EKER posted a video

Carolina Hardcore Ecstacy F Zappa (Tribute By ) A D Eker 2022

For me a less known lyric and work from the late Frank Zappa in a tribute to his Work a rendition in my own style ,on a Gibson tenor 1934 . do enjoy !
35 minutes ago


© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->