Greetings, has anyone used the center lead rod piezo sold by Gitty to amplify a homemade cone/biscuit assembly?  I've cut a groove in the wooden biscuit and wanted to use a piece of deer antler as a saddle (see photo below).  I was planning to drill a hole through the center of the biscuit, sandwich the center lead rod piezo down in the groove, between the biscuit and the antler saddle.  Do you think this will work ok?  I've had some experience with disc piezos, but this is my first try at a rod piezo.  Thanks!

center lead rod piezo

Views: 262

Replies to This Discussion

I have only used the normal rods and then cut them in half with my dremel. If you had those you could still use that biscuit - it is probably thick enough to drill on an angle and then route out some of the bottom to get over to the centre.

can you please explain what you mean by "normal rods"  and where you get them?  I'm really new at this.

Gee golly James I didn't notice the reply here - Sorry - I just get the regular 6 node rods that have the wire at the end and I cut them in half with a cuttoff wheel on the dremel. I use the three nodes with 3 string cbg's. You've probably got this all figured out by now - or you're reaaaaaaaaaalllllly patient.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

License Plate Resonator CBG

Started by Wyndell Ferguson. Last reply by T-Gripped Aug 31, 2018. 4 Replies

Morphing an El Cheapo 6-string into a reso

Started by T-Gripped. Last reply by PhilUSAFRet Jul 27, 2016. 1 Reply

My first reso

Started by Hillbilly Jeff. Last reply by Hillbilly Jeff Jan 4, 2016. 2 Replies

tin plate

Started by Mal Chilvers Oct 27, 2015. 0 Replies

full sized resso

Started by Mal Chilvers. Last reply by PhilUSAFRet Mar 23, 2014. 1 Reply

Help amplifying first reso build

Started by James Shelton. Last reply by jawbone Oct 28, 2013. 3 Replies

First Reso Build

Started by The Capo Kid. Last reply by jawbone Jul 31, 2013. 15 Replies

Spinning own reso' cones.

Started by Graham Alibone. Last reply by Graham Alibone May 17, 2013. 6 Replies

Very basic resonators

Started by Darren Wolbold. Last reply by HarleyTodd Apr 14, 2013. 8 Replies

Resonator Documentary

Started by Wade. Last reply by Dion Bilalis Feb 20, 2013. 1 Reply

first resonator

Started by Mal Chilvers. Last reply by Robert Rowe Aug 26, 2012. 5 Replies

Piezo or magnetic pickup?

Started by David Tutterrow GutBucketGuitars. Last reply by rusty case Aug 22, 2012. 2 Replies

win e box deapth

Started by Mal Chilvers. Last reply by Alan Hodges Mar 6, 2012. 2 Replies

Antique Fruit Cake Tin Resonator Guitar (Sort of)

Started by Bob Lumpkin. Last reply by Bob Lumpkin Jan 20, 2012. 12 Replies

Cone Size

Started by Jake W. Last reply by Rand Moore Jul 19, 2011. 1 Reply

Resonator that small - makes it any sense?

Started by Seaman Jay. Last reply by Habanera Hal Jul 4, 2011. 8 Replies

Anyone Else Building Homemade Electric Resonators?

Started by Mike Leeworthy. Last reply by Gadsden Guitars May 4, 2011. 16 Replies

magnetic pickups and resonator guitars.

Started by Tim Gale. Last reply by Johnny Swank May 3, 2011. 2 Replies

Stroviols

Started by Gobi. Last reply by Gobi Nov 3, 2009. 2 Replies

Resonator 101...Where do I start?

Started by Pass the Ammo. Last reply by Tuskmountain Oct 23, 2009. 10 Replies

Latest Activity

BrianQ. replied to Engblom's discussion Pickup type and placement
"Hard to have a pickup that doesn’t touch the soundboard. I don’t think a pickup takes…"
15 minutes ago
BrianQ. liked Randy S. Bretz's photo
29 minutes ago
BrianQ. replied to Engblom's discussion Truss rod?
"If you go to the top of the page, you’ll see this? This box contains tons of info? "
30 minutes ago
Myron Joe Hickel commented on Gary O'slide's video
Thumbnail

Gary O'Slide - Cigar box guitare western blues song

"that sounded great. like that kick me when I'm down sound."
33 minutes ago
Myron Joe Hickel liked Gary O'slide's video
37 minutes ago
Myron Joe Hickel replied to Ian's discussion Building a 3-pole single coil pickup
"My first flat pup I did not use anything but a drill driver and a paddle bit that I ground off the…"
1 hour ago
Myron Joe Hickel replied to Ian's discussion Building a 3-pole single coil pickup
"Ian my winder is a copy from a You Tube video I saw a couple years ago. do a search on YT and you…"
2 hours ago
BrianQ. posted a status
"There’s a thing at the top of the page, it’s called the “Search” box, it was put there to find answers to your questions?"
6 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Carolina Hardcore Ecstacy F Zappa (Tribute By ) A D Eker 2022

"To bad you did ! Poorness, i have lots more Tenors ( just understand today that real tenors are…"
6 hours ago
Jerry Jordan commented on Rich's photo
7 hours ago
Taffy Evans replied to Engblom's discussion Truss rod?
"Hi Engblom, this has been covered a few times, maybe BrianQ can help you find it. Taff"
7 hours ago
Taffy Evans replied to Engblom's discussion Pickup type and placement
"Hi, there are many builders that have experimented with piezo placement and each will have a…"
7 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->