Hey all.

 I have been watching this speaker for awhile now. They are American Vintage model G8Cs, 20 watt, 8 ohm speakers. They are on sale for about 20% off and are supposed to sound bluesy. I listened to a a few sound clips for it and so I bought two. I have yet to build an amp, but I have been studying various schematics, teaching myself all this stuff with the help of several very patient members here. Thank you again. I have an enclosure mostly built to house a five inch 5 watt speaker I have and will build an LM386-based amp for my first one. (Ruby? Lil Gem?)  Anyway, I would like suggestions on what would be a good next step for a build to power these nice speakers?

 Thank you in advance for your patience with this long-winded request.


Views: 119

Replies to This Discussion

Or you could upgrade an old amp?

Thanks for that, I may try that later on, but I have a bag full of caps, resistors. pots. etc. I got from Tayda, per your recommendation, and some vero board I got locally. (They were out of strip board or I'd have gotten both to try.) Anyway, looking forward to trying something after I get that first LM386 built.

I used their 10" Veteran speaker in a amp build for a friend, it was a great sounding speaker and affordable at that time. They have a "Green Beret" Brit voiced speaker too.

 Thank you Paul. I couln't find a lot of feed back from owners of these speakers, but what I read was all good. Your experience is very much appreciate it. 

Would you guys have a careful newbie put these with an LM386, or something with a little more oomph, like a 384 or a TDAwhatever? I have two. 

That WGS Veteran was good for 20watts, comes in 4 or 8 ohm and has a high decible rating. As long as your wattage isn't over 20 and you get the right ohm rating it will handle any Solid State chip Opamp or Tube amp within those parameters.

 Just for reference, I know all that, Paul. Thank you. I guess what I have been trying to ask is there a more suitable amp to use than the LM386 that is a fairly easy build for an amateur?

The Ruby amp was the first amp build that I did. It was really easy and building on my own perfboard afforded me all the room I needed. You could use a breadboard if you want to. Don't let it intimidate you, use it as a fun learning experience that won't burn the house down or electrocute anyone if all fails. LOL

With resistors and film type caps, they aren't polarized so it doesn't matter which end gets connected to positive or negative. Electrolytic caps that are often used in the B+ circuit(100uf) and output to speaker circuit(220uf) are polarized and have designated positive/negative terminals.  Only need to know which ends of the pots, JFET, 386 chip to wire up to the correct place as shown on the schematic/layout that BrianQ provided.

I'm sure that he'll help with any questions you have as well as I. Just shoot me a PM.

 Thank you, Paul! That cleared up and confirmed quite a few things I was unsure of and some I had no idea...

Thanks again!

TDA20XX (2003, 2030), are great, but they need a boost, first... if this is your first, build the LM386 (Ruby, Gem, etc.) to get your feet wet...

Building is fun, but I've found I can cobble together/modify premade boards cheaper and faster than I can build them myself...    

But I think you'd be more successful with a tested and known circuit for your first project...

 Thank you, John! I'll be building BrianQ's clean boost within a week or two, if plans work out.  (...why do I hear Junior Kimbrough music all of a sudden?) 

 I've considered several of the premade PCBs and  others, but with these cigar box guitars, I suddenly found myself in unfamiliar territory. I seemed to have acquired an urge to be a control-freak in that I want to build every piece that I can possibly make. Can't make tuners yet, nor strings, but I am trying to buy as little as possible. The buying is going to be in the amps that I want to build. Speakers are expensive.

 It looks as though it's gonna be an LM386 Ruby to start with, unless I build that boost first...

Fun Fun Stuff!


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

Tribute amps I've built

Started by Tom Hoglund Nov 7. 0 Replies

LM386 Amp w/ Switchable Clean Channel

Started by BrianQ.. Last reply by BrianQ. May 28, 2021. 1 Reply

Simple 1st Timer CBG Amp

Started by BrianQ.. Last reply by BrianQ. Sep 28, 2020. 25 Replies

Matching Speakers to LM386

Started by Southern Ray. Last reply by Southern Ray Aug 6, 2020. 11 Replies

Suggestions wanted for easy amp build

Started by Southern Ray. Last reply by Southern Ray Jun 16, 2020. 11 Replies

Ruby Amp

Started by BrianQ.. Last reply by Southern Ray May 17, 2020. 27 Replies

Low-Z pickup and components values

Started by Southern Ray. Last reply by Southern Ray May 13, 2020. 6 Replies


Started by Southern Ray. Last reply by Southern Ray May 3, 2020. 12 Replies

DIY Spring Reverb

Started by Kevin Keating. Last reply by Paul Craig Oct 17, 2019. 4 Replies

TDA2030A Amp

Started by Bama Hound. Last reply by Gary Stenzel Jul 23, 2017. 14 Replies

Home Brew Champ Tube Amp

Started by Scott aka Farmer Ted. Last reply by Paul Craig Feb 6, 2017. 3 Replies

Dual IM386 Chip amp

Started by Paul Craig. Last reply by Paul Craig Jan 27, 2017. 29 Replies

5 Watt Amp Kit (DIY Case)

Started by Walter Haapapuro. Last reply by Gene Jones Dec 7, 2016. 46 Replies

DIY reverb behold - I found this online

Started by Danny B.. Last reply by Paul Craig Nov 2, 2016. 3 Replies

Bass Cabinet project

Started by Murdoc_420. Last reply by Murdoc_420 Jul 16, 2016. 34 Replies

Kalamazoo Model 1 Deluxe

Started by Scott aka Farmer Ted. Last reply by Rick Alexander Jun 20, 2016. 12 Replies

LM386 amp and other stuff

Started by Denis U. Last reply by Denis U May 29, 2016. 19 Replies

Latest Activity

AGP # commented on Uncle John's photo

We lost early CBN good guy, Wes Carl on Friday

"Very Sad to hear of another long time CBN member passing on, R.I.P. Wes Carl  ;-{ "
35 minutes ago
AGP # liked Uncle John's photo
38 minutes ago
AGP # liked Uncle John's photo
38 minutes ago
AGP # commented on A.D.EKER's video

Whatyoumaycallit BCB 2022

"Nice bit of upbeat strumming A.D. & I'd call it a "Thingamajig" ;-D"
40 minutes ago
AGP # liked A.D.EKER's video
42 minutes ago
AGP # liked 3 String Blues's video
44 minutes ago
A.D.EKER left a comment for Uncle John
"To bad John a other one Gone early ! a sad year towards the end ! strengt to yee my good friend…"
1 hour ago
A.D.EKER commented on A.D.EKER's photo

cbg Hall of Fame clean

"Thanks Schott for the Like appriciated !"
1 hour ago
Uncle John commented on Uncle John's photo
1 hour ago
Uncle John commented on Uncle John's photo

We lost early CBN good guy, Wes Carl on Friday

"Wes would appreciate the remembrance and nice commens."
1 hour ago
Jerry Jordan commented on Uncle John's photo

We lost early CBN good guy, Wes Carl on Friday

"I remember Wes and his amps. Nice stuff. I always thought he looked like a long lost brother. RIP…"
1 hour ago
A.D.EKER commented on Uncle John's photo

We lost early CBN good guy, Wes Carl on Friday

"Geeaaassz  Thats to bad !! my condoleses to his wife and famely! Thanks BrianQ for posting !"
1 hour ago


© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->