Please respect my work & Do Not Repost them on any other sites (Pinterest, Facebook,Instagram) Thank You

Updated Layout:

Views: 1185

Replies to This Discussion

I prefer the bigger speakers myself, don't want anything under 8" diameter although some of the 6" ones sound decent. Really like the 10 and 12 inch for guitar and 10 or 15 inch for bass.

Sometimes I put my Ruby through a Realistic 20watt PA amp a buddy gave me and play it with a old Fisher 20watt 10" speaker I found at a Goodwill store.

I do think these Ruby amps sound better than the Lil Gem and Smokey types. When I get a chance, I'll try that JFET on the output side.

 OK, I give up. First of all, I really appreciate the time and effort you take to draw up these circuits, Brian. I have spent a lot of time trying to find something that explains the different colors and shapes of the components in these drawings, a legend, if you will. I get some of the simple stuff - C=Cap and R=Resistor, the colors mean something, obviously, the type of component, such as "film cap" "Electrolytic" etc.? Is there a legend around that can help and if so, where can find it? How do you determine what type of cap to use?

 Thanks to anyone that can help with this,


You just answered your own question :D Yes, green ones are Film caps & round ones are Electrolytic, the colors are really to identify the different types of parts in the layout? Anything 1 uF & larger will be an electrolytic, there’s only a few types- axial, radial, one stands up on end & the other lays down on its side?Anything smaller than 1 uF will be a film capacitor, these are usually called ”greenies”, they are polyester mylar type, metallized polypropylene (orange drop) & polyester box type can also be used, greenies are most common & easily obtainable? See how the parts look just like the ones in the layout? 

Forgot to add, the resistors are blue because they are metal film instead of carbon film,? you can use either, but metal film adds minimal background noise to the circuit? Like a military grade part?

Ray you might want to try a kit first, seeing it in person helps a lot. While not a Ruby or any other name, these work ok and having a marked board makes it a lot easier. Just a couple bucks on eBay, I have seen them other places too. I switched the headphone jack to a instrument jack. Also I have another one that I want to swap some components to be closer to the guitar amps, hopefully get to it someday.

It might be easier to buy and put together for a beginner, but they aren't a Ruby Amp. It's not just a difference of name, it's a difference of components, component values and schematic/layout. Those shown only have a volume pot instead of a Volume and gain pot like the Ruby has. They will not sound the same.

I think the layouts that BrianQ has provided are simple enough for most people to follow and the exact parts are easy to find at several websites for little enough money.

To add to that Paul, I'll be putting up a stripboard layout in the near future, which is a lot easier than the perfboard layout?

Thank you, thank you gentlemen! This is getting very exciting for me. Kinda like when I started building CBGs. Things are really beginning to "click".

Thank each and every one of you!


Another update I’ll do down the line is, adding  “External power” to it? 

Sounds great to me. I spent three hours yesterday alone trying to figure out how many milliamps a LM386 wall wart should provide. I would appreciate it greatly!

Wall warts for stompboxes/mini amps are between 200ma-500ma. Why, because 9V batteries are around the same specs?  Look for Roland,Boss, DOD,Danelectro,Dunlop 9v power adapters, there’s a lot of info about them out there. those I mentioned above have been workhorses of the industry for decades? Look at sweetwater or musicians friend 

I'll add that those cheap brand walwarts can add a lot of noise and sometimes oscillation sounds to your amp or pedal. So sometimes that old saying that you get what you pay for can be very true. I guess those cheaper brands are skipping the filters that keep those issues at bay. So be careful when shopping for those walwarts.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Discussion Forum

LM386 Amp w/ Switchable Clean Channel

Started by BrianQ.. Last reply by BrianQ. May 28, 2021. 1 Reply

Simple 1st Timer CBG Amp

Started by BrianQ.. Last reply by BrianQ. Sep 28, 2020. 25 Replies

Matching Speakers to LM386

Started by Southern Ray. Last reply by Southern Ray Aug 6, 2020. 11 Replies

Suggestions wanted for easy amp build

Started by Southern Ray. Last reply by Southern Ray Jun 16, 2020. 11 Replies

Ruby Amp

Started by BrianQ.. Last reply by Southern Ray May 17, 2020. 27 Replies

Low-Z pickup and components values

Started by Southern Ray. Last reply by Southern Ray May 13, 2020. 6 Replies


Started by Southern Ray. Last reply by Southern Ray May 3, 2020. 12 Replies

DIY Spring Reverb

Started by Kevin Keating. Last reply by Paul Craig Oct 17, 2019. 4 Replies

TDA2030A Amp

Started by Bama Hound. Last reply by Gary Stenzel Jul 23, 2017. 14 Replies

Home Brew Champ Tube Amp

Started by Scott aka Farmer Ted. Last reply by Paul Craig Feb 6, 2017. 3 Replies

Dual IM386 Chip amp

Started by Paul Craig. Last reply by Paul Craig Jan 27, 2017. 29 Replies

5 Watt Amp Kit (DIY Case)

Started by Walter Haapapuro. Last reply by Gene Jones Dec 7, 2016. 46 Replies

DIY reverb behold - I found this online

Started by Danny B.. Last reply by Paul Craig Nov 2, 2016. 3 Replies

Bass Cabinet project

Started by Murdoc_420. Last reply by Murdoc_420 Jul 16, 2016. 34 Replies

Kalamazoo Model 1 Deluxe

Started by Scott aka Farmer Ted. Last reply by Rick Alexander Jun 20, 2016. 12 Replies

LM386 amp and other stuff

Started by Denis U. Last reply by Denis U May 29, 2016. 19 Replies

Combo Amp Build

Started by Paul Craig. Last reply by Paul Craig May 27, 2016. 113 Replies

Latest Activity

t-belly johnson commented on bemuzic's video
2 hours ago
t-belly johnson liked bemuzic's video
3 hours ago
t-belly johnson liked Poorness Studios's video
3 hours ago
t-belly johnson commented on Poorness Studios's video

Got My Mind Set on You (cover on acoustic guitar)

"Crackin` tune, crackin` cover! One of the first records I ever bought was George Harrisons.....I…"
3 hours ago
Rich commented on Rich's video

Justin Johnson for RTL guitars

"Thanks, Doug. and Uncle John. and Poorness. and A.D. This man has magically gifted fingers."
3 hours ago
MadGomer replied to Paul Craig's discussion What's on your workbench?
"Unfortunately just the box!"
4 hours ago
Uncle John commented on Jim Winslow's photo


"Oh yeah!  Very nice looking sixer."
6 hours ago
Uncle John commented on Jim Winslow's photo


"Nice shape and color.   Cool room too."
6 hours ago
Uncle John commented on Jim Winslow's photo


"Mighty good makings.  Nice box!"
6 hours ago
Uncle John commented on A.D.EKER's video

Give me all your Loving A .D. Eker 2022

"Good, good and getting side ways - at least in your pic.   I think one of my sons and his…"
6 hours ago
A.D.EKER commented on A.D.EKER's video

Give me all your Loving A .D. Eker 2022

"   i am the DutchGuy  Born and Raised !     Gets the Blood Pumping !!"
6 hours ago
A.D.EKER posted a video

Give me all your Loving A .D. Eker 2022

a Ode to the Old Rockers ZZTop, Status Quo, Led Zeppelin, Tod Rundgrun, ACDC, who where not afraid to shout out, what the state off affair was at the time...
6 hours ago


© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->