Replies to This Discussion

Permalink Reply by BrianQ. on August 2, 2020 at 12:52pm

Don’t worry, you can’t set anything ablaze with a half a watt & 9 volts of power? And don’t worry about the ohms difference, its a Lo fi amp, not crucial? 

https://mesaboogie.zendesk.com/hc/en-us/articles/218267437-What-is-...

Permalink Reply by Southern Ray on August 2, 2020 at 1:24pm

OK, thank you very much! So, then I can use one 3.2 Ohm speaker? (My preference. Two amps!)

Permalink Reply by BrianQ. on August 2, 2020 at 2:17pm

Yea, those are good, do not pass on any Sony made speakers. They don’t fool around? I don’t use anything under 2.5 watts for LM386 amps. Way better than the half watt speaker that’s in a Smokey? 

Permalink Reply by Southern Ray on August 2, 2020 at 4:47pm

 Thanks for that tip, Brian! Coincidently, I am making a smokey from one of your layouts. Gonna try to add a volume to it since none of my CBGs have a volume control yet. 

Permalink Reply by Denis U on August 3, 2020 at 5:24am

Permalink Reply by Southern Ray on August 3, 2020 at 1:23pm

 Denis,

 Try again using the HTML Editor on top right of the reply window. I usually "copy" the message before I send it, in case the message disappears.

Permalink Reply by GARAGE HERMIT on August 4, 2020 at 10:17pm

Permalink Reply by Southern Ray on August 4, 2020 at 10:20pm

 Hermit,

Try again using the HTML Editor on top right of the reply window. I usually "copy" the message before I send it, in case the message disappears.

Permalink Reply by GARAGE HERMIT on August 6, 2020 at 9:13pm

nearly any speaker will work with a LM386, here's one i made using a LM386 and an old draw plus a 12" FANE 15 ohm speaker, sound's fine,

Permalink Reply by Southern Ray on August 6, 2020 at 9:38pm

 Yeh, I saw this one awhile back. Fell in love with it immediately. Been meaning to tell you for awhile - I like your work. Very  nice work.

Thank you for the info.