It's been a while since I have built any guitars. A new passion has taken my attentions...restoring vintage tube amplifiers.

A few months ago I found a vintage tube amp chassis on Ebay. Compulsion urged me to click "bid", and so I did...and won.

The following couple of weeks was spent researching and buying parts. Based on the chassis' original tube compliment of a 12ax7 pre-amp, a 6x4 rectifier, and a 6AQ5 power tube, I chose to replicate/clone a vintage Kalamazoo Model 1 amplifier. I swapped the 6AQ5 for a 6BQ5/EL84.

Sorting out and removing all the old capacitors and resistors was dirty work, and dangerous. The large filter capacitors in a tube amp can store deadly levels of DC power.

Then it was time to work. Laying out and soldering point-to-point (no circuit board) was a new challenge. But this method is traditional for vintage amps, and makes for easier modifications later on, if desired.

The most difficult part of the project was not the wiring. It was the dreadful task of applying the leatherette/tolex material to the cabinet. I have a new-found appreciation and respect for those who do it professionally.

In the end, this project was a great learning experience.

Best of all, this amp has some serious tone.

For anyone interested, I have it listed on Ebay.

Views: 470

Replies to This Discussion

Sweet!! Maybe post a vid before selling.

Coooool :)

i know it's your first try at restoring an amp, but the bit's of wood screwed on the front and back of the cab look terrible, maybe your next one will be better,

My first try at tolex and cabinets, and chose to make it different than the common commercial manufactured drab...but not my first tube amp build. But thanks for your support.

Thanks Way. Positive vibes, yeah.

maybe if you stained the new wood and relic'd it a bit it would look "vintage and hand-made"

still good for having a go at making it,

Great job Scott. I got a 65 Silvertone 1482 amp to rebuild for my next project.

Thanks Paul. Yes, those Silvertone 1482 amps are a great project, and cool sounding amps too.

I want one of these badly for a harp amp.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

LM386 Amp w/ Switchable Clean Channel

Started by BrianQ.. Last reply by BrianQ. May 28, 2021. 1 Reply

Simple 1st Timer CBG Amp

Started by BrianQ.. Last reply by BrianQ. Sep 28, 2020. 25 Replies

Matching Speakers to LM386

Started by Southern Ray. Last reply by Southern Ray Aug 6, 2020. 11 Replies

Suggestions wanted for easy amp build

Started by Southern Ray. Last reply by Southern Ray Jun 16, 2020. 11 Replies

Ruby Amp

Started by BrianQ.. Last reply by Southern Ray May 17, 2020. 27 Replies

Low-Z pickup and components values

Started by Southern Ray. Last reply by Southern Ray May 13, 2020. 6 Replies

Oops

Started by Southern Ray. Last reply by Southern Ray May 3, 2020. 12 Replies

DIY Spring Reverb

Started by Kevin Keating. Last reply by Paul Craig Oct 17, 2019. 4 Replies

TDA2030A Amp

Started by Bama Hound. Last reply by Gary Stenzel Jul 23, 2017. 14 Replies

Home Brew Champ Tube Amp

Started by Scott aka Farmer Ted. Last reply by Paul Craig Feb 6, 2017. 3 Replies

Dual IM386 Chip amp

Started by Paul Craig. Last reply by Paul Craig Jan 27, 2017. 29 Replies

5 Watt Amp Kit (DIY Case)

Started by Walter Haapapuro. Last reply by Gene Jones Dec 7, 2016. 46 Replies

DIY reverb behold - I found this online

Started by Danny B.. Last reply by Paul Craig Nov 2, 2016. 3 Replies

Bass Cabinet project

Started by Murdoc_420. Last reply by Murdoc_420 Jul 16, 2016. 34 Replies

Kalamazoo Model 1 Deluxe

Started by Scott aka Farmer Ted. Last reply by Rick Alexander Jun 20, 2016. 12 Replies

LM386 amp and other stuff

Started by Denis U. Last reply by Denis U May 29, 2016. 19 Replies

Combo Amp Build

Started by Paul Craig. Last reply by Paul Craig May 27, 2016. 113 Replies

Blog Posts

How to add photos?

Posted by Stephen Sell on January 13, 2022 at 1:19pm 2 Comments

My first 3 string cigar box guitar

Posted by Stephen Sell on January 13, 2022 at 1:16pm 1 Comment

Shedding a Tear for Dave Lynas

Posted by Poorness Studios on December 20, 2021 at 8:30pm 4 Comments

Latest Activity

ILL GREEN replied to ILL GREEN's discussion Truss Rods. Needed?
8 minutes ago
BrianQ. left a comment for Philly Dupree
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
1 hour ago
BrianQ. left a comment for Wayne
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
1 hour ago
BrianQ. left a comment for John Daley
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
1 hour ago
BrianQ. left a comment for Mike
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
1 hour ago
BrianQ. left a comment for Timothy Kenefick
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
1 hour ago
BrianQ. left a comment for Mark Coulter
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
1 hour ago
BrianQ. left a comment for StuartDavidson
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
1 hour ago
BrianQ. left a comment for Jim Tomsovic
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
1 hour ago
Jim Tomsovic posted a photo

CBG # 1

Needs hardware for finish.
2 hours ago
tony cousins liked Ken Vickerson's photo
3 hours ago
Profile IconJim Tomsovic, Ian Knott, StuartDavidson and 6 more joined Cigar Box Nation
4 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->