I have two identical Brick House boxes that say they want me to create a mountain dulcimer out of them. I'm wondering now about the neck design. I've seen the necks that are arched on the side that meets the soundboard leaving smaller contact points with the box. I think this is done to let the soundboard vibrate more freely than it can with the whole length of neck glued /screwed to it. 

Is that true, or is it just done to make it prettier?

If it is for sound, do you think the extra work is worth the payoff?

Thank you for your input, Bluesheart

Views: 1852

Replies to This Discussion

It is done for added volume but also for looks. To really add volume hollow out the fret board. From where the fret board stops at the peghead  to just before the scoop out. There`s 2 ways this can be done. Routing out a channel or making a 3 piece fret board.      CGB Mountain Dulcimer

When I made my Dulcimer I used the tablesaw to make a channel in the fretboard, and cleaned it up with a chisel. I marked between the 7th.fret and the strum hollow so I wouldn't cut too far, and set the depth on a scrap piece of wood. I moved the guide over about a blade width at a time until I got the proper width. It should work even better with dado blades

You can make the 3 piece fret board fairly easy like I did the one for my hollow neck slider. Just omit the bottom Hollow Neck Designpiece.

Many professional dulcimer makers, like McSpadden simply hollow out the fretboard. Most high end custom makers at least have an option for the scalloped fret board as it does add volume and looks pretty. If you decide to scallop the fretboard, space them equally and leave at least a quarter or three eights in contact between each scallop, probably a half or more before the scoop. Either way it should sound good.

Cool, a hollow neck seems like a good idea. Would one also have opening/s in the top under a hollow neck to"let the sound into the boxes" ?

Most modern dulcimer (or is that an oxymoron?) do have narrow slots beneath the center of the fretboard. Most I've seen have 2 or 3 about half the length of the fretboard. There's a pretty good drawing of a dulcimer top at www.davidbeede.com.
Click on his full size dulcimers and you'll see maybe four on his, but it's easier to understand by seeing it.

 It's probably cheating-but I just make sure that my neck is thinner than a standard guitar neck, and flat in the back (though rounded at the sides). I then glue and peg small, matching rectangular blocks where I want the points to meet, and then use a round file and fine grit emery board to sculpt the result into a rounded arch. For some reason I find this so much easier to do than hollowing out the neck.

Yes, the small blocks under the neck idea occurred to me as well. Sounds like a good compromise. Thanks!

 De Nada...

I ended up using 3 boxes for the body and kept the neck raised off of them with small oak spacers. Boxes are open to each other and neck bolts to boxes with #6 machine bolts and flat washers. If I still had a router I would have routed out the neck and cut openings in the boxes and mounted it direct. Overall I am very pleased with how it sounds, especially in a quiet room. Playing with others I find the volume needs a boost so that is when the piezo will be handy. The tone and sustain are as good or even better than I had hoped for. Not being a dulcimer player, I find I tend to do most of my "Finger Dancing" on the D instead of the doubled melody strings (dd) but I like what I'm hearing!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

making my first dulcimer/strumstick/ kind of thing,

Started by GARAGE HERMIT. Last reply by GARAGE HERMIT Mar 30. 2 Replies

Miniature dulci-tar for young child

Started by Richey Kay. Last reply by James Conder Jan 14, 2018. 11 Replies

Mountain dulcimer phaser type sound?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by QGolden Sep 15, 2016. 17 Replies

Need sources to buy dulcimer soundboard wood

Started by Dano Schultz. Last reply by Dano Schultz Sep 10, 2016. 5 Replies

New to all of this.

Started by Kirk Bolas. Last reply by Gordon Cooper Aug 3, 2016. 3 Replies

Newest Dulcitar

Started by Greg Thompson Jul 19, 2016. 0 Replies

"Evolving" dulcimer fret patterns?

Started by Habanera Hal. Last reply by Greg Thompson Jul 7, 2016. 12 Replies

Completed my first strummer/Dulcitar

Started by Greg Thompson. Last reply by Paul Craig Sep 7, 2015. 6 Replies

playing question

Started by Truth Instruments. Last reply by Truth Instruments Aug 30, 2015. 6 Replies

Strum stick

Started by Bobby Fields. Last reply by Seth Tabberer Aug 21, 2015. 5 Replies

newbie help

Started by stav. Last reply by Ellwood T. Bear Apr 6, 2015. 3 Replies

Mountain Dulcimer Necks

Started by Bluesheart. Last reply by Bluesheart Apr 1, 2015. 10 Replies

What about a blues-cimer?

Started by Diane in Chicago. Last reply by Brown Water Jerry (Rice) Nov 10, 2014. 21 Replies

Fret Spacing - standard and not

Started by Diane in Chicago. Last reply by Jesse Halter Jul 2, 2014. 57 Replies

Dulci scale length

Started by Bluesheart. Last reply by Bluesheart Nov 24, 2013. 9 Replies

my first strummer

Started by Bad Wolf. Last reply by Battmann Aug 31, 2013. 6 Replies

just finished this little stick strummer

Started by jeff burgoyne. Last reply by Scott aka Farmer Ted Jun 17, 2013. 1 Reply

Latest Activity

Rich commented on Rich's video
Thumbnail

Counting down the days 'til Christmas day

"Yes Poorness. Thanks. Well, I did say I was working on it...  ;)"
1 hour ago
A.D.EKER commented on Poorness Studios's video
Thumbnail

What I'm Losing (a pre-coffee cover on cigar box guitar)

"She is like you sayed A Fine performer,whit her Band,and a good song writer ,i see why see is your…"
1 hour ago
Poorness Studios liked Tim LaFave's video
1 hour ago
Doug Thorsvik commented on Poorness Studios's video
Thumbnail

What I'm Losing (a pre-coffee cover on cigar box guitar)

"One of your best Kale! I especially appreciated the personal remarks about how Reina inspired you.…"
2 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Bring it On Home to Me: 2-String Surf Chugger Cigar Box Guitar

"Thanks for the encouraging feedback Brian! Mike (pictured to my right above and a member of CBN)…"
2 hours ago
Poorness Studios posted a video

What I'm Losing (a pre-coffee cover on cigar box guitar)

Today's video is a special one for me because Reina del Cid has been a huge influence on my channel. I attempt to cover one of her beautiful songs on cigar b...
3 hours ago
MadGomer replied to Brenda's discussion canjo building and tuning in the group Building a Cigar Box Guitar 101
"No right or wrong tuning, unless you want to specifically align it with another instrument for…"
12 hours ago
BrianQ. commented on Gary O'slide's video
Thumbnail

Gary O'Slide Compilation Folk Western Blues

"Listened to the whole album on Spotify, c’est magnifique!"
13 hours ago
BrianQ. liked Doug Thorsvik's video
13 hours ago
BrianQ. commented on Doug Thorsvik's video
Thumbnail

Bring it On Home to Me: 2-String Surf Chugger Cigar Box Guitar

"Never thought I’d hear this oldie on cbg’s, great selection once again slinger’s!!"
13 hours ago
BrianQ. replied to Brenda's discussion canjo building and tuning in the group Building a Cigar Box Guitar 101
13 hours ago
Brenda replied to Brenda's discussion canjo building and tuning in the group Building a Cigar Box Guitar 101
13 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->