I have two identical Brick House boxes that say they want me to create a mountain dulcimer out of them. I'm wondering now about the neck design. I've seen the necks that are arched on the side that meets the soundboard leaving smaller contact points with the box. I think this is done to let the soundboard vibrate more freely than it can with the whole length of neck glued /screwed to it. 

Is that true, or is it just done to make it prettier?

If it is for sound, do you think the extra work is worth the payoff?

Thank you for your input, Bluesheart

Views: 1852

Replies to This Discussion

It is done for added volume but also for looks. To really add volume hollow out the fret board. From where the fret board stops at the peghead  to just before the scoop out. There`s 2 ways this can be done. Routing out a channel or making a 3 piece fret board.      CGB Mountain Dulcimer

When I made my Dulcimer I used the tablesaw to make a channel in the fretboard, and cleaned it up with a chisel. I marked between the 7th.fret and the strum hollow so I wouldn't cut too far, and set the depth on a scrap piece of wood. I moved the guide over about a blade width at a time until I got the proper width. It should work even better with dado blades

You can make the 3 piece fret board fairly easy like I did the one for my hollow neck slider. Just omit the bottom Hollow Neck Designpiece.

Many professional dulcimer makers, like McSpadden simply hollow out the fretboard. Most high end custom makers at least have an option for the scalloped fret board as it does add volume and looks pretty. If you decide to scallop the fretboard, space them equally and leave at least a quarter or three eights in contact between each scallop, probably a half or more before the scoop. Either way it should sound good.

Cool, a hollow neck seems like a good idea. Would one also have opening/s in the top under a hollow neck to"let the sound into the boxes" ?

Most modern dulcimer (or is that an oxymoron?) do have narrow slots beneath the center of the fretboard. Most I've seen have 2 or 3 about half the length of the fretboard. There's a pretty good drawing of a dulcimer top at www.davidbeede.com.
Click on his full size dulcimers and you'll see maybe four on his, but it's easier to understand by seeing it.

 It's probably cheating-but I just make sure that my neck is thinner than a standard guitar neck, and flat in the back (though rounded at the sides). I then glue and peg small, matching rectangular blocks where I want the points to meet, and then use a round file and fine grit emery board to sculpt the result into a rounded arch. For some reason I find this so much easier to do than hollowing out the neck.

Yes, the small blocks under the neck idea occurred to me as well. Sounds like a good compromise. Thanks!

 De Nada...

I ended up using 3 boxes for the body and kept the neck raised off of them with small oak spacers. Boxes are open to each other and neck bolts to boxes with #6 machine bolts and flat washers. If I still had a router I would have routed out the neck and cut openings in the boxes and mounted it direct. Overall I am very pleased with how it sounds, especially in a quiet room. Playing with others I find the volume needs a boost so that is when the piezo will be handy. The tone and sustain are as good or even better than I had hoped for. Not being a dulcimer player, I find I tend to do most of my "Finger Dancing" on the D instead of the doubled melody strings (dd) but I like what I'm hearing!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

making my first dulcimer/strumstick/ kind of thing,

Started by GARAGE HERMIT. Last reply by GARAGE HERMIT Mar 30. 2 Replies

Miniature dulci-tar for young child

Started by Richey Kay. Last reply by James Conder Jan 14, 2018. 11 Replies

Mountain dulcimer phaser type sound?

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by QGolden Sep 15, 2016. 17 Replies

Need sources to buy dulcimer soundboard wood

Started by Dano Schultz. Last reply by Dano Schultz Sep 10, 2016. 5 Replies

New to all of this.

Started by Kirk Bolas. Last reply by Gordon Cooper Aug 3, 2016. 3 Replies

Newest Dulcitar

Started by Greg Thompson Jul 19, 2016. 0 Replies

"Evolving" dulcimer fret patterns?

Started by Habanera Hal. Last reply by Greg Thompson Jul 7, 2016. 12 Replies

Completed my first strummer/Dulcitar

Started by Greg Thompson. Last reply by Paul Craig Sep 7, 2015. 6 Replies

playing question

Started by Truth Instruments. Last reply by Truth Instruments Aug 30, 2015. 6 Replies

Strum stick

Started by Bobby Fields. Last reply by Seth Tabberer Aug 21, 2015. 5 Replies

newbie help

Started by stav. Last reply by Ellwood T. Bear Apr 6, 2015. 3 Replies

Mountain Dulcimer Necks

Started by Bluesheart. Last reply by Bluesheart Apr 1, 2015. 10 Replies

What about a blues-cimer?

Started by Diane in Chicago. Last reply by Brown Water Jerry (Rice) Nov 10, 2014. 21 Replies

Fret Spacing - standard and not

Started by Diane in Chicago. Last reply by Jesse Halter Jul 2, 2014. 57 Replies

Dulci scale length

Started by Bluesheart. Last reply by Bluesheart Nov 24, 2013. 9 Replies

my first strummer

Started by Bad Wolf. Last reply by Battmann Aug 31, 2013. 6 Replies

just finished this little stick strummer

Started by jeff burgoyne. Last reply by Scott aka Farmer Ted Jun 17, 2013. 1 Reply

Latest Activity

Engblom replied to Engblom's discussion String attachment place
"Did you use any bracing when you built that guitar?"
1 hour ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Bring it On Home to Me: 2-String Surf Chugger Cigar Box Guitar

"Know the tune Doug but forgot who done it believe one of them soul groeps like the Four Tops , or…"
2 hours ago
smilingdog1 commented on Gary O'slide's video
Thumbnail

Gary O'Slide - cigar box guitar rustic wood

"Peaceful slid guitar, sounds nice."
3 hours ago
smilingdog1 liked Gary O'slide's video
3 hours ago
Blues Frog replied to Bob Leon's discussion First time builder, getting confused with what types of boxes are best in the group Introduce Yourself!
"Bob,    Site issues. When replying sometimes the poster has to first go to the html…"
5 hours ago
BrianQ. left a comment for William B.
"Welcome back, check out the Resources tab for build/play info and join some groups located in the…"
5 hours ago
William B. liked Michael Bowlin's discussion Hello From Idaho
9 hours ago
William B. updated their profile
9 hours ago
William B. added a discussion to the group Introduce Yourself!
Thumbnail

New guy… sort of.

Hello everyone. i joined CBN almost a decade ago but never really got involved with the site. Now…See More
9 hours ago
William B. joined Cigar Box Nation's group
Thumbnail

Introduce Yourself!

We wanna know who you are! Where ya from? What'cha buildin'? This is a place for new members to…See More
9 hours ago
AGP # commented on Poorness Studios's video
Thumbnail

What I'm Losing (a pre-coffee cover on cigar box guitar)

""Well Done Poorness", had never heard of Reina del Cid before now, just followed your…"
11 hours ago
AGP # liked Poorness Studios's video
12 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->