Replies to This Discussion

Permalink Reply by MadGomer on September 25, 2016 at 6:02am

Agree with John, flip the box so the hinge side is up as you intend, then re-tape your bridge and pickup template for that right handed orientation. Love that box, is it painted or paper, and plywood?

Permalink Reply by Trey Allen on September 25, 2016 at 6:17am

I already flipped it. I also wrote on my notebook in big letters to not build it upside down. It's painted solid wood. I thought it was going to be a little small, but I like it.

Permalink Reply by Kigar on October 6, 2016 at 2:23pm

Looks good to me, and cool box too. A lot of people take a thin cut off the neck inside the box so the top only touches the neck at each end. This lets the top move more freely. When I did this I glued the cut off piece to the bottom of the neck to maintain the thickness.

• ‹ Previous
• 1
• 2
• Next ›
• Page