I have been building my CBG's with 1 X 2 maple. I have given one to a friend and he says that the neck is starting to bow. Is this a problem others have seen and any suggestions on how to prevent bowing would be welcome. Thanks.

Views: 188

Replies to This Discussion

Sounds like the neck is under lots of tension,scale length? what strings, how high is it tuned? Maybe a pic? Have you tried using a heel, or adding a hardwood fretboard with your builds? Shorter scale lengths like 23” are less likely to bow as quickly. 

I am using a 25.5" scale length with medium strings. This particular CBG does not have a heel. It was the first electric I built. I did not add a fret board, simply wood burned the fret lines. Thanks for the info.

Maple is generally very strong unless the wood is still green and hasn't been dried out before use.

Are you absolutely sure it is indeed Maple?

Yes. 

Lou, I had that issue with my first two.  I was able to salvage both of them by adding another 1X2 on the back side.  Honestly this was probably overkill but looks and plays nice.  The boxes in both cases had enough depth to add a .75" board.  Even though they were stick thru designs, I kept the bridge end of the stiffener inside the box, and then tapered the neck end of the stiffener so it blended into the original neck between nut and first fret.  The guys I've talked with who use quarter inch fretboards on a 1X2 neck don't seem to have this issue so again my solution is probably overkill.

I am sure that adding another 1 X 2 to it will help. Thanks.

I don't have Maple available near me, I've been using Red Oak with great results. I do add a 1/4" fingerboard of the same type of wood to all of mine. those additional ieces glued to the neck help a lot. Also use non adjustable trussrods on 4 string or more gits or bass gits.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 4. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16. 6 Replies

Frettin' and stainin'

Started by Douglas Allen Laffin. Last reply by Order99 Aug 11. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 11. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23. 2 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Drawings or pictures on the box

Started by Martin. Last reply by Chad Taylor Oct 22, 2021. 6 Replies

Hard metal bridges

Started by Michael Myers. Last reply by Michael Fred Johnson Oct 22, 2021. 2 Replies

Getting the most sustain on a fretless CBG.

Started by Joe Plotts. Last reply by Taffy Evans Jun 30, 2021. 4 Replies

2nd Build Electronics Questions

Started by Steven Adler. Last reply by Steven Adler Apr 20, 2021. 4 Replies

yard sticks for fret boards

Started by Raymond L. Last reply by the anonymous pick Apr 17, 2021. 3 Replies

Latest Activity

BrianQ. replied to Engblom's discussion Pickup type and placement
"Hard to have a pickup that doesn’t touch the soundboard. I don’t think a pickup takes…"
14 minutes ago
BrianQ. liked Randy S. Bretz's photo
28 minutes ago
BrianQ. replied to Engblom's discussion Truss rod?
"If you go to the top of the page, you’ll see this? This box contains tons of info? "
29 minutes ago
Myron Joe Hickel commented on Gary O'slide's video
Thumbnail

Gary O'Slide - Cigar box guitare western blues song

"that sounded great. like that kick me when I'm down sound."
32 minutes ago
Myron Joe Hickel liked Gary O'slide's video
35 minutes ago
Myron Joe Hickel replied to Ian's discussion Building a 3-pole single coil pickup
"My first flat pup I did not use anything but a drill driver and a paddle bit that I ground off the…"
1 hour ago
Myron Joe Hickel replied to Ian's discussion Building a 3-pole single coil pickup
"Ian my winder is a copy from a You Tube video I saw a couple years ago. do a search on YT and you…"
2 hours ago
BrianQ. posted a status
"There’s a thing at the top of the page, it’s called the “Search” box, it was put there to find answers to your questions?"
6 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Carolina Hardcore Ecstacy F Zappa (Tribute By ) A D Eker 2022

"To bad you did ! Poorness, i have lots more Tenors ( just understand today that real tenors are…"
6 hours ago
Jerry Jordan commented on Rich's photo
7 hours ago
Taffy Evans replied to Engblom's discussion Truss rod?
"Hi Engblom, this has been covered a few times, maybe BrianQ can help you find it. Taff"
7 hours ago
Taffy Evans replied to Engblom's discussion Pickup type and placement
"Hi, there are many builders that have experimented with piezo placement and each will have a…"
7 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->