Do you ever repaint them prior to building? If so, what steps do you take and what products do you use? 

Any tips on cleaning them?

Do you ever hit them with a spray coat of poly?

I would like to see your 'before' and 'after' pix

TIA!!!

Views: 126

Replies to This Discussion

TG, as with most stuff in life, the answer is "it depends." Depends on the condition of the plate and the look you're after. For cleaning - good old hot soapy water, maybe even run them through the dishwasher, to get bugs, dirt, and oil off. If it's an old plate with fragile paint, wash by hand for sure. Dry immediately to minimize rusting, unless you want rust. You can use a rust conversion product to make old orange rust look dark gray/black if desired. Rather than poly, I'd suggest a clear coat laquer or enamel, just personal preference. It will provide some protection and help keep the existing paint or coating from peeling further if you have that issue. You could certainly repaint with color if you wish, again just depends on the look you're after. No rules, except posting pics as you proceed!!

Reasons why I heaven't done an "LPG" 1. complications with pickups.  I like to keep the option of doing an "electric" open, even when I start without that intention. A bad acoustic still makes an acceptable electric. 1b. It would be trickier to cut out a hole for the pickup, and I don't know too much about electricity and (unwanted) feedback, but the plate makes me nervous about the possibility. 2. Because there are fifty states and each of them has made some significant changes over the years. I sometimes wonder why CB Gitty sells Mississippi plates and not "Live Free or Die" plates from NH. I guess its a "licencing issue"<lol> get it?, groans? ah, well, nevermind. Still, if you have a plate of enough vintage, you might have different issues with materials and paint-ability. I'd hesitate to apply advice from CB Gitty's plates to vintage plates (or pieces of plate. Antique British plates might need serious work, but would look pretty cool). For a first attempt at a "LPG", getting their fresh, clean plate and the accompanying advice for that particular plate, is not a bad idea. 


Christopher,

you can use Flat Pup that screw onto the top of the plate and will not have the interference that you mention.  Mississippi, the delta blues is considered the birth place of Blues.  The CBG is rooted in that history and many here respect and build with that in mind.  Shane Speal has a bar and CBG museum.  Red Dog has a nice history write up on it. 

enjoy, there are no rules 

You can clean them with whatever you’re using to wash your car, general purpose cleaners like simple green & purple power make fast work of grime. I like to use aftermarket touch up paint from the automotive stores like pep boys & auto zone. As said in previous post, stay away from poly, it will give off an amber hue instead of a clean clear coat. Some like that kind of patina? As far as electricity coming through to the plate, it just doesn’t happen, that’s a complete myth. There are preventative filters that keep voltage from running on the outside of the circuit? To answer Christopher’s question, Gitty sells Mississippi plates because that’s where the birthplace of the blues is? Muddy waters,Robert Johnson, Elmore james, Fred mc dowell, Son house, Howlin wolf, Charlie Patton,Willie brown & many more from there? Good luck on your LPG adventure :)

Sorry BrianQ I didn’t read your excellent reply

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Locations

Started by Roy Smith. Last reply by the anonymous pick on Sunday. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 11. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2. 5 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Apr 8. 11 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by MadGomer Feb 27. 19 Replies

Doubling the high string

Started by Robert Killen. Last reply by Tim Pannabecker Feb 25. 22 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23. 2 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Drawings or pictures on the box

Started by Martin. Last reply by Chad Taylor Oct 22, 2021. 6 Replies

Hard metal bridges

Started by Michael Myers. Last reply by Michael Fred Johnson Oct 22, 2021. 2 Replies

Getting the most sustain on a fretless CBG.

Started by Joe Plotts. Last reply by Taffy Evans Jun 30, 2021. 4 Replies

2nd Build Electronics Questions

Started by Steven Adler. Last reply by Steven Adler Apr 20, 2021. 4 Replies

yard sticks for fret boards

Started by Raymond L. Last reply by the anonymous pick Apr 17, 2021. 3 Replies

Where in the UK.

Started by Ian MCDONALD. Last reply by Lazylefteye Mar 28, 2021. 4 Replies

whaaaaaa?

Started by andrew payton-smith. Last reply by Taffy Evans Mar 7, 2021. 11 Replies

wiring a split coil mini humbucker

Started by Don Tucker. Last reply by Taffy Evans Mar 6, 2021. 2 Replies

Canjo tuning

Started by declan foley. Last reply by Taffy Evans Nov 23, 2020. 18 Replies

Latest Activity

Pete Asselin left a comment for Pete Asselin
"Thanks Brian for the heads up…site looks pretty active and I will try and glean what I can…"
31 minutes ago
BrianQ. left a comment for Pete Asselin
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
40 minutes ago
BrianQ. left a comment for Winfried Beyer
"Welcome, check out the Resources tab for build/play info and join some groups located in the Posts…"
40 minutes ago
Profile IconPete Asselin and Winfried Beyer joined Cigar Box Nation
51 minutes ago
Keith Rearick liked Doug Thorsvik's video
1 hour ago
Keith Rearick liked Randy S. Bretz's photo
1 hour ago
Keith Rearick liked Randy S. Bretz's photo
1 hour ago
Keith Rearick liked Randy S. Bretz's photo
1 hour ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Poor Little Fool: 2-String Chugger Cigar Box Guitar

"Thanks much Danny! We’ll keep at it."
2 hours ago
BrianQ. liked Randy S. Bretz's photo
2 hours ago
BrianQ. liked Randy S. Bretz's photo
2 hours ago
BrianQ. liked Randy S. Bretz's photo
2 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->