I’ve built a few CBGs and been quite happy with the results. However, I’ve recently viewed a lot of YouTube videos where builders have put their piezo pickups, disc or rod, into recesses in the neck, and not in contact with the lid, as I have done. Which is the right, or most effective, way? Experienced builders please advise.

Views: 286

Replies to This Discussion

Would you mind sharing where and how you are placing the piezos currently?

When I’ve used a disc piezo I’ve fixed them to the inside of the lid, with hot glue, directly under the bridge position. I would have removed material from the neck so that the lid, and/or pickup, doesn’t come into contact with any part of the neck with the exception of the points where the through neck enters and leaves the box.

Piezo in the neck is very interesting.  With the traditional placement under the bridge, when there is neck contact, it really projects through the amp.  The difference in location and output is intriguing.  I’m sure you will get some great responses from the pros on this site.  Thanks for bringing this idea up, I’ll look forward to the responses 

Alot of factors at play here . Not all piezos are equal .  or the same quality .  Vibration of the lid and build design can factor in as well . and/or if the  neck is hard attached to lid etc etc . 

Rule of thumb is to test  placement with tape to try and find a sweet spot .  Also,  some piezos are more sensitive than others , and may need to be tamed with hot glue , padding or .  placement on the neck may hush it a little better  than getting full sensitivity  by the bridge or on the lid . 

Otherwise  a cheap squaky piezo may sound like 2 skeletons humping on a tin roof  using a tin can for a condom ...... or like pulling a cat through a keyhole .

So , test what ya got to work with , and find the sweet spot .  and be sure you get the same brand and quality when trying to repeat success , or  repeat the same design. 

Hi, It's hard to beat anonymous pick's desription, spot on.

Just to add that strip or UST, or under saddle transducers are made to sense the vibrations of the string, so mounting as close to the string as possible, [under the saddle} gets the best out of them.

Disc piezo transducers read the vibrations of timber in a CBG. The timber is excited by the strings, so again closer to that area the more response. Not always a good response, so as AP says experiment.

Also, a preamp is recommended for a more pleasing performance from a piezo pickup.
Cheers taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

3 String Blues commented on Gary O'slide's video
Thumbnail

Folk cigar box guitar oil can shell relaxing song

"lovely sound from that instrument!"
2 hours ago
3 String Blues posted a video

Delta Blues - The most beautiful sound in the world

old school blues played on cigar box guitar- from the webpage https://www.reddogguitars.com #cigarboxguitar #3stringguitar #reddogguitars
2 hours ago
Southern Ray commented on Glenn Kaiser's video
Thumbnail

GK less Paul Diddley Bow

" Lookin' good, Glenn!"
6 hours ago
BrianQ. liked Glenn Kaiser's video
8 hours ago
Glenn Kaiser commented on Glenn Kaiser's photo
Thumbnail

Less Paul by GK

"Truly. Thought about a flying V but... 'ehhhh, like this vibe, roughed as I did it. Fun fer…"
8 hours ago
Glenn Kaiser commented on Glenn Kaiser's photo
Thumbnail

My New Less Paul

"Indeed so! Ha! -Glenn"
8 hours ago
AGP # liked Glenn Kaiser's photo
8 hours ago
AGP # liked Glenn Kaiser's photo
8 hours ago
AGP # liked Glenn Kaiser's video
8 hours ago
AGP # commented on Doug Thorsvik's video
8 hours ago
AGP # liked Doug Thorsvik's video
8 hours ago
AGP # liked Poorness Studios's video
8 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->