They make the Pure and Simple kit, and the Big Easy kit. Both are 3 string fretless and both mount the neck to the top of the box on the outside. It uses two bolts. This is a very simple design for sure. But, what are we giving up with this design compared to runner by the neck through the box? 

Views: 105

Replies to This Discussion

Build one & see?

see what JP Soars said  about his 2 string guitar (same kind of model) >>> https://y.com.sb/watch?v=2EIiLlgqZd0

Well, the 'stick-on-top' method gives up a little bit of resonance, so the 'neck-thru' is a lot more forgiving on smaller boxes. There are ways to minimize the resonance loss though:


1) Just like the Dulcimer it emulates, the less of the neck that touches the box the better...as long as you still maintain strength of neck. Washers work, as do small wooden shims. Scalloping the neck to only touch in three or four places is both beneficial to the sound and artistic-and you could use washers, shims or scallops on the underside of the soundboard to match the upper attachments if you want too...


2) A bridge that overlaps the neck to touch both neck and soundboard helps regain resonance as well. C.B. Gitty makes a 'Flying Bridge' on his website, or you can carve and tune your own...


3) Use a metal body for the sound box instead-those candy boxes and cookie tins have resonance to spare!


Combine all three and-well, who needs a pickup?

Hi, I have not seen the kits of which you speak but I reckon either one has a design that can affect tone and volume. On top or under the lid depends on a number of things. But when starting out with either design you are going to be happy to make music.

I have mentioned this many times, the top makes the best sound if its vibrating qualities are not restricted.

If the neck is attached to the top, inside or out, it is restricted from doing its job effectively. You will get sound, but you could get better.

Also, the air in the box contributes to sound, volume and tone, so depending on the size of the box, filling the box with timber with a "through" neck can also affect the end result.

I have used both methods but the one I prefer is to attach the neck to the box using a heal as used on traditional guitar builds. Side-by-side comparisons will demonstrate this well.

If when I have built using the two methods you mention I build so that the neck does not touch the top.

But they all work.
Taff

  Found a Youtube Link that shows a design nearly exactly as I described:

https://www.youtube.com/watch?v=q00WH_POikM



And the results are pretty darn loud for such a tiny box:

https://www.youtube.com/watch?v=i6FElSF-62o

Hi, those links are a good way to explain what we are talking about here Order99.

This dulcimer sits above my desk, I don't know why I did not think of showing it earlier. It shows what you describe in your post above.


Cheers Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol yesterday. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16. 6 Replies

Frettin' and stainin'

Started by Douglas Allen Laffin. Last reply by Order99 Aug 11. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 11. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by MadGomer Feb 27. 19 Replies

Doubling the high string

Started by Robert Killen. Last reply by Tim Pannabecker Feb 25. 22 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23. 2 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Drawings or pictures on the box

Started by Martin. Last reply by Chad Taylor Oct 22, 2021. 6 Replies

Hard metal bridges

Started by Michael Myers. Last reply by Michael Fred Johnson Oct 22, 2021. 2 Replies

Getting the most sustain on a fretless CBG.

Started by Joe Plotts. Last reply by Taffy Evans Jun 30, 2021. 4 Replies

2nd Build Electronics Questions

Started by Steven Adler. Last reply by Steven Adler Apr 20, 2021. 4 Replies

yard sticks for fret boards

Started by Raymond L. Last reply by the anonymous pick Apr 17, 2021. 3 Replies

Where in the UK.

Started by Ian MCDONALD. Last reply by Lazylefteye Mar 28, 2021. 4 Replies

Blog Posts

Let’s talk Aeolian…

Posted by BrianQ. on August 27, 2022 at 12:05am 0 Comments

Building a Violin w/ GITTY Parts

Posted by Brad Craig on August 11, 2022 at 6:39pm 3 Comments

Effects Pedals

Posted by Trey Allensworth on May 26, 2022 at 10:04am 12 Comments

Latest Activity

Scott Schoepf liked Chuck Bouwens's photo
9 minutes ago
Scott Schoepf liked Jim Winslow's photo
14 minutes ago
Jerry Jordan posted a photo

The man, the legend, Dave Lynas.

I was thinking of Dave, and it’s been a year since he passed. A great inspiration and a fantastic…
39 minutes ago
Scott Schoepf posted photos
7 hours ago
Scott Schoepf liked Rob Uker's photo
7 hours ago
Jim Winslow posted photos
9 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
10 hours ago
Uncle John commented on Doug Thorsvik's video
Thumbnail

Put Your Hand in the Hand: 2-String Surf Chugger Cigar Box Guitar

"Nope and I am more Scottish than Italic.   :-)"
10 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Put Your Hand in the Hand: 2-String Surf Chugger Cigar Box Guitar

"A pretty big bold italic statement Uncle John! You don’t mince words. Thanks!!!"
10 hours ago
Matthew Borczon posted a video
10 hours ago
Uncle John commented on Muddy Creek Guitars's photo
Thumbnail

I’m back!

"Good looking booth and gits.  Hope you are having fun getting back into it."
10 hours ago
Uncle John commented on A.D.EKER's video
Thumbnail

Love Key Yellow Jacket 2022

"I like this one, buddy.  But I don't like those wasp kind of yellow jackets."
11 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->