Im trying to find out if Ghosting  a gitty bucker to the underside of an aluminum Plate would work? Does it have to be steel? Ive got this really cool MOTHMAN plate that I dont want to mess up..Any help out there would be greatly appreciated.Thanks in advance

Views: 88

Replies to This Discussion

Mike. Larry Sobol here.  Thanks for the tips yesterday. Sorry for the slow response but Im new here and still trying to figure out how to navigate around the site, post pics, and create a page. A second beer may bring things into focus. Now I have to find Brian Q to thank him as well. Thanks Again. Much appreciated !

Larry, good news, pretty much all modern license plates are aluminum. And yes you can ghost a Gittybucker up to 1/2” away from the strings? Put a strip of thin tape on the underside of the plate where the pickup will be just to be on the safe side? Also, there’s a video of Shane Speal ghosting a Gittybucker on YouTube, maybe worth a few tips? Good luck on your build :)

Brian. Larry Sobol here. Thanks for the link to the Video. Just found Mike Simpson to thank him as well.New to the site and still trying to figure out how to navigate around, create a page , and post pics. I will figure it out in due time. Thanks again!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 4. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16. 6 Replies

Frettin' and stainin'

Started by Douglas Allen Laffin. Last reply by Order99 Aug 11. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 11. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23. 2 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Drawings or pictures on the box

Started by Martin. Last reply by Chad Taylor Oct 22, 2021. 6 Replies

Hard metal bridges

Started by Michael Myers. Last reply by Michael Fred Johnson Oct 22, 2021. 2 Replies

Getting the most sustain on a fretless CBG.

Started by Joe Plotts. Last reply by Taffy Evans Jun 30, 2021. 4 Replies

2nd Build Electronics Questions

Started by Steven Adler. Last reply by Steven Adler Apr 20, 2021. 4 Replies

yard sticks for fret boards

Started by Raymond L. Last reply by the anonymous pick Apr 17, 2021. 3 Replies

Latest Activity

Taffy Evans replied to Engblom's discussion Truss rod?
"Hi again, I tried BrianQ's suggestion [search] and found the previous post. I do not know if…"
44 minutes ago
Jim Booth replied to Jim Booth's discussion Baritone Slide Guitar
44 minutes ago
A.D.EKER left a comment for Darryl Tuttle
"Hope you Get well soon Darryl ! stuck whit Covid can bee a blessing and a Bommer at the same time !…"
5 hours ago
A.D.EKER commented on A.D.EKER's photo
Thumbnail

cbg Hall of Fame clean

"If there is One who needs to be in there its AGP# ,the Man is worked the vingers to the Bone…"
5 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

New Born Dream A D Eker 2022

"Thanks AGP# for the Support Like ! some do and others don't ! its just a ideer ,it was ment as…"
5 hours ago
Myron Joe Hickel replied to Ian's discussion Building a 3-pole single coil pickup
"Yes it was going to be a humbucker but I never wrote the windings on it so I don't know what…"
6 hours ago
Myron Joe Hickel replied to Jim Booth's discussion Baritone Slide Guitar
"That is a nice design I really like the ambrosia maple top. I have made one 30"er and I…"
7 hours ago
Doug Thorsvik left a comment for Philthy
"I am still using 3D printed frets and bridges. I have been figuring out the intonation and…"
9 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
9 hours ago
AGP # commented on A.D.EKER's video
Thumbnail

New Born Dream A D Eker 2022

"Nice Pickin' & Graphics A.D. I Like It  :-)"
11 hours ago
AGP # liked A.D.EKER's video
11 hours ago
AGP # commented on Doug Thorsvik's video
Thumbnail

Try to Remember: 2-String Surf Chugger Cigar Box Guitar

"Cruisy Smooth Slingers, "Well Done"  :-) "
11 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->