Roadkill a.k.a. John Maw's Discussions (448)

Discussions Replied To (38) Replies Latest Activity

"Hi. Thanks all for the info. In fact in the end I ordered straight fret wire from Be…"

Roadkill a.k.a. John Maw replied Dec 1, 2011 to Curved frets into a flat fretboard - can I do it?

21 Nov 5, 2012
Reply by Roger Franklin Weston

"Thanks Bob. I see what you mean about "almost too much". I will now have to get a mi…"

Roadkill a.k.a. John Maw replied Nov 17, 2011 to Wood strength chart - do you know of a better one than this?

5 Nov 20, 2011
Reply by Andy Eight Spades CBG

"Hi Ben. I didn't know that they worked in reverse. Very useful info. Thanks for ment…"

Roadkill a.k.a. John Maw replied Oct 14, 2011 to Curved frets into a flat fretboard - can I do it?

21 Nov 5, 2012
Reply by Roger Franklin Weston

"Hi David. Thanks. There are some useful links there. I had a look at the Tonetech si…"

Roadkill a.k.a. John Maw replied Oct 14, 2011 to Curved frets into a flat fretboard - can I do it?

21 Nov 5, 2012
Reply by Roger Franklin Weston

"Hi Travis. That's just the sort of thing I was hoping to hear. I appreciate the info…"

Roadkill a.k.a. John Maw replied Oct 13, 2011 to Curved frets into a flat fretboard - can I do it?

21 Nov 5, 2012
Reply by Roger Franklin Weston

"Hi Wes. Thanks for the info. It's good to know that other people are using curved fr…"

Roadkill a.k.a. John Maw replied Oct 13, 2011 to Curved frets into a flat fretboard - can I do it?

21 Nov 5, 2012
Reply by Roger Franklin Weston

"Hi Jarmo. Thanks for the information. That's really good to know. All the best and t…"

Roadkill a.k.a. John Maw replied Oct 13, 2011 to Curved frets into a flat fretboard - can I do it?

21 Nov 5, 2012
Reply by Roger Franklin Weston

"Hal. Yes. And the rubber gloves and a few others. Oilyfool. I shall keep some for so…"

Roadkill a.k.a. John Maw replied Aug 7, 2011 to Willow - any use for CBGs?

12 Aug 7, 2011
Reply by Roadkill a.k.a. John Maw

"Hi Hal. Thanks for that. I had seen the mention of use for flutes, but then accordin…"

Roadkill a.k.a. John Maw replied Aug 7, 2011 to Willow - any use for CBGs?

12 Aug 7, 2011
Reply by Roadkill a.k.a. John Maw

"Hi Colin. Thanks. Yes. Maybe a body of some sort of dulcimer. I wondered if it might…"

Roadkill a.k.a. John Maw replied Aug 7, 2011 to Willow - any use for CBGs?

12 Aug 7, 2011
Reply by Roadkill a.k.a. John Maw

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

AGP # posted photos
5 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

200th Zoom Meeting and feeling “The Weight”: 3D Printed Cigar Box Guitar

"Thanks BrianQ! We will keep the Slingerized covers coming!"
8 hours ago
Gary O'slide posted a video
9 hours ago
AGP # liked Rich's photo
9 hours ago
AGP # liked Doug Thorsvik's video
9 hours ago
Keith Rearick liked Doug Thorsvik's video
11 hours ago
Keith Rearick liked Gary O'slide's video
11 hours ago
Keith Rearick liked Dogleg Steve's video
12 hours ago
Keith Rearick liked Dogleg Steve's video
12 hours ago
Keith Rearick liked Dogleg Steve's video
12 hours ago
Keith Rearick liked Poorness Studios's video
12 hours ago
Keith Rearick liked Gary O'slide's video
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->