First post to the Uke group - made my first Cuke, my 6th instrument overall.  I saw someone suggested it was a good use for a smaller box, and I had a short piece of walnut which was perfect for the neck.  It came out pretty good, I went with a Soprano size.  As I have tried to do with each build, I want to try some new things and hopefully end up with something playable.

I figured I would write up the design, maybe it can help someone someday. Added bracing around the inside of the box using the liner that came with it except I used a thicker piece on the neck side.  Slotted the full inside height of the box and notched the neck to screw directly to the brace.  All detail is on the top of the box so it can open, only the latches keep it closed.  I wanted to try some top braces and made an X style using coffee stir sticks, the top is flat so I don't know if they were needed or not.  I selected the hole size base on a doorknob cutting bit I had.  First try with straight tuners, they work fine but they are too close to each other (oops!)  Also the first pass on the neck was too thick for the tuners.  My last few builds I added a hole to hang them up for display.  My first tapered neck and full fret job, it seems to intonate ok.  No fretboard, just the walnut, but the frets were nice and flat from just pressing them in.  Copper wire for side fret markers.  I like to use a floating bridge which helps adjustment, and just used a piece of scrap to retain the strings.  Chunk of Delrin plastic for the nut, "real" ukulele strings. Action is nice and low, sounds pretty nice but not as loud as a regular uke. 

 

Views: 494

Replies to This Discussion

Nice job.

Nice looking uke.  I use some similar techniques on my uke builds.

 Absolutely gorgeous-and if it isn't as loud as you like then the easy access provided by the unglued box allows for a pickup installation whenever you want...

Advise needed - as I mentioned the tuners are to close and of course now two keys want to share the same space.  I figure my options are - 1) go to gear tuners, 2) shave down the keys until they clear each other, or 3) redrill new hole spacing.  Anyone do option 3 and have it not look like a kludge?  It turned out nice otherwise so I'd like it to look good.

And thanks for the comments!

 Hmmm....is that Walnut stained or unstained? Also, do you have any leftover bits?

 If it were me, i'd just re-drill the holes where you want them-probably the top two-then fill in the other holes with Walnut dowels/pegs, cut and sand to match. If you can still see the marks then some fine grade Walnut sawdust, epoxy to fix and more sanding would work-and if it is stained just re-stain it.

  Worst case scenario, just shave a few mm off the head, and add a 1mm veneer on front and back the way commercial luthiers do, then re-drill through the veneer..contrasting veneer on the heads is considered somewhat stylist these day, so I hear.

  I don't practice what I preach mind you-if you check my own builds you'll see I slap down dissimilar woods on top of each other and slap a clear coat over the contrasting woods for a 'rustic' look...

I would have to re-drill both upper and lower, I can make it work by moving the left two towards the nut to make a staggered pattern.  I do have a little piece of the walnut left so I could try to drill a hole and see if I can patch it ok.  By the way that is the natural color with tung oil on it, so no staining issues to deal with. Found a site for making a peg where they chucked the blank in a drill press and used a scrap board with a small nail thru it for a tailstock and sort of lathed it sideways.

I also saw where some guitars paint this area especially on the bottom, so that would be an option as well if it looks real bad.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Ukes For Gand kids

Started by Rupe Power. Last reply by Sal Monella Nov 11, 2022. 3 Replies

Gitaulele

Started by Brown Water Jerry (Rice). Last reply by Kigar Mar 21, 2020. 1 Reply

Semi-Uke Kit Build

Started by Brian Revels. Last reply by Brian Revels Oct 6, 2017. 8 Replies

ideal narrow of the box?

Started by jose garcia paredes. Last reply by Kigar Sep 3, 2017. 3 Replies

Steel string advice sought for a chronic head scratcher (me)

Started by Slow Blues Dani & Ol' Grey Bear. Last reply by Bob Johnston May 1, 2017. 10 Replies

(CB) U bass help

Started by Kigar. Last reply by Ronald Whitford Apr 6, 2017. 1 Reply

Cigar Box Ukulele group on Facebook

Started by Kentucky Mojo Jan 31, 2017. 0 Replies

Classical Ball end strings

Started by John Hopper Dec 30, 2016. 0 Replies

String choices: nylon vs. steel

Started by Lane Martin. Last reply by gary sheldon Dec 3, 2016. 5 Replies

MDF Box Ukes

Started by Scott W. Last reply by Kentucky Mojo Nov 4, 2016. 7 Replies

My Brothers Christmas Present

Started by George Fitzgibbon. Last reply by George Fitzgibbon Oct 26, 2016. 6 Replies

CBU Avo Uvezian Tenor Uke

Started by Kigar. Last reply by Greg Thompson Jul 8, 2016. 5 Replies

Triangular Concert Uke

Started by Kigar. Last reply by Greg Thompson Jul 8, 2016. 4 Replies

First Build

Started by B. Kirkwood. Last reply by B. Kirkwood Apr 13, 2016. 2 Replies

Assembly Order

Started by B. Kirkwood. Last reply by B. Kirkwood Mar 29, 2016. 3 Replies

Neck length

Started by B. Kirkwood. Last reply by gary sheldon Mar 29, 2016. 3 Replies

reversed tuners on a uke - advise wanted

Started by Kigar. Last reply by gary sheldon Feb 23, 2016. 3 Replies

New to Uke!!

Started by jeffrey ross. Last reply by Habanera Hal Feb 17, 2016. 19 Replies

Great little video!

Started by Wade. Last reply by rusty case Feb 7, 2016. 2 Replies

Fretboard attachment

Started by gary sheldon. Last reply by rusty case Feb 7, 2016. 3 Replies

Blog Posts

A Tribute

Posted by Ghostbuttons on January 15, 2023 at 12:00pm 1 Comment

Let’s talk Aeolian…

Posted by BrianQ. on August 26, 2022 at 5:05pm 0 Comments

Latest Activity

Uncle John commented on RON NORTHCUTT's photo
Thumbnail

Multi-strummer build

"Wow.  Prodigious!"
23 minutes ago
Uncle John commented on Doug Thorsvik's video
Thumbnail

Sundown: 2-String Surf SLG License Plate Guitar (Not a Cigar Box Guitar)

"Those slingers are picking some great songs.   Excellent. Happy Ground hog day,…"
24 minutes ago
Uncle John commented on A.D.EKER's video
Thumbnail

FORD Hubcap slide BCB 2023

"That is SUCH a great looking guitar, Andries.  Whining, bluesy good play.  Happy…"
26 minutes ago
BrianQ. commented on Fergus Lester's photo
Thumbnail

Non CBG

"Ehh… if it’s wood & it’s a box, then it’s a cbg in spirit like the…"
9 hours ago
BrianQ. posted a status
"Don’t you hate it when you make a big order & forget one thing???"
9 hours ago
BrianQ. liked RON NORTHCUTT's photo
9 hours ago
BrianQ. liked RON NORTHCUTT's photo
9 hours ago
BrianQ. commented on RON NORTHCUTT's photo
Thumbnail

Multi-strummer build

"I feel you with cigar boxes, since they’re never all the same size in an assortment, you have…"
9 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

FORD Hubcap slide BCB 2023

"Slide on A.D. slide on. Raw and real!"
10 hours ago
Doug Thorsvik commented on RON NORTHCUTT's photo
Thumbnail

Multi-strummer build

"Bring on the clones! Looking good Ron. Production runs can really save some time especially setup…"
10 hours ago
RON NORTHCUTT commented on RON NORTHCUTT's photo
Thumbnail

Multi-strummer build

"This is the first time I have done a 6-unit production run and it is really speeding things up. I…"
14 hours ago
Paul Craig replied to Mark's discussion Affordable and easy designs for youth group
"I just used a 10 dollar wood and metal pencil box from Walgreens to make a guitar for my Grandson.…"
14 hours ago

Music

© 2023   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->