Hello,

I've built a handful of 3 string CBGs and a few handfuls of CB diddley bows and want to make a 2 string fretless bass as a gift for my cousin. I know nothing about basses and need some guidance.

On my 3 stringers I used a neck through design. Is that sufficient for a 2 string bass or do I need more strength added somehow?

What scale lengths are there, what is recommended?

Do I need special tuning pegs?

What strings would be recommended for it?

Any other suggestions?

Thanks in advance!
Mike

Views: 1197

Replies to This Discussion

Neck thru is good for this build. Depending on what the strings will be tuned to and gauge, I would make the neck with some renforcement. You could hide it under the fingerboard. Pegs that are light in weight would be good also so it would not be neck heavy. I play Bass myself and I use mostly flat wound strings. Personal prefrence I guess. Good Luck with the build. Blue Max Stringed Instrument Repair

I built a 2-string bass with a 20" scale (similar to the Kala U-Bass) using Aquila Thundergut strings and parts from Gitty (preamp, piezo rod, tuning machines). I don't have plans, but I put a video online at  https://www.youtube.com/watch?v=K-2oyDjZCPA

I can tell you it's small, stays in tune and everyone wants to play it at my ukulele club. 

 

28 - 36" would be the standard scale length range

Bass tuners can accomodate thickers strings, but regular tuning pegs can e drilled out, Danelectro uses the same tuners on bass and guitar.

Rype of string depends on type of pickups, if ,  steel ,steel strings work with magnetic pickups.

Sorry for the late reply. I got very busy at work and then was away for vacation.

For the neck reinforcement, what would you use?

For the strings, are there 2 bass strings that are the recommended when only doing 2? What would be best to tune them to?

For the scale, are there calculators to use or something? I had purchased scale charts for the CBGs I did from cbgitty but for bass not sure what to do. I don't know anything about a bass, this is just something I would like to do for my cousin.

Thank you!
Mike
Hi Mike,

I'm a compelte rookie at building, but have built a rough bass that I am proud of. Here's what I did, maybe my experience will help.

I built a 2 stringer. Tuned E and A for my preference, I think most bass players would prefer this too. I used a 2x2 pine, 6 feet tall with a 43" scale. It is a stand up bass. Currently my profile pic is my dad playing it. I did not reinforce the neck at all, the pine has a slight bow after a few months, but still plays fine. I'm not too concerned about it. In the future I would recommend coughing up a few more $'s and using a hard wood that won't bend, but pine should work at 2 inches thick. As my first bass build, I kept my expenses super low, in case I created a pile of junk. So I used 2 old piano strings, they are rough on the fingers, and do not allow any type of sliding. They will also wear away at the soft pine wood over time. I would recommend using flatwound bass strings if you're using pine, or anything else. The are easy on the hands, great for sliding on a fretless, and will make the bass feel more "playable" They also offer some nice low end. I was lucky enough to have an old electric pickup to slap on there for now.

I use the scale calculator at stewmac.com. You can adjust to any size you want. The 43" scale is the same as a stand up double bass, it was fun for my experiment, but it will be difficult and expensive to find strings this size. I believe most standard basses are a 34" scale

Hi Mike,

I'm in the same boat—found a nice cedar bible box (9.5" x 6.5" x 2.75") at a swap meet and bought an ash shovel handle thats 46.5" long. I'm thinking a 36" scale length—no real reason other than I want low. I'm aiming for a a Morphine-esque type sound, so it will be fretless and played with a slide. It will be played badly, I'm sure, as I've only dinked around with a bass on a few occasions. 

I'm just not sure how to go about making the neck.

Are you buying a neck or making your own?

Jon
www.jonwitsell.com

Mike, did you ever build that bass?

Oops sorry, I missed a bunch of replies. No I never did but someday will take it on. Things went a little sideways here mid summer and things did not go as planned with this or any other projects I had been planning. Hoping this is a better year and I can get back to normal (or at least what it was before) :-)

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cigar box a little different

Started by Phil Farabough. Last reply by Phil Farabough Nov 10, 2018. 10 Replies

first bass build

Started by Patrick. Last reply by BrianQ. Nov 8, 2018. 6 Replies

looking for alternate tunings-

Started by Daniel Walter. Last reply by Ken Hutchinson Oct 14, 2017. 16 Replies

Bass build help

Started by Ro'Nique Staley Mar 22, 2017. 0 Replies

My first bass build

Started by Bryan Putnam. Last reply by Richard Haas Dec 2, 2016. 15 Replies

Building my first bass

Started by Henry S. Last reply by TN Twang Nov 30, 2016. 11 Replies

fingerboard question(s)

Started by Euraquilo. Last reply by Fomhorach Nov 1, 2016. 6 Replies

3 string bass questions

Started by Euraquilo. Last reply by Euraquilo Oct 31, 2016. 18 Replies

3 String Cigar Box Bass Guitar Parts

Started by Will T. Last reply by Murdoc_420 Jul 16, 2016. 3 Replies

Bass strings??

Started by jeffrey ross. Last reply by jeffrey ross Mar 25, 2016. 13 Replies

Magnetic vs Piezo pickup

Started by PhilUSAFRet. Last reply by Murdoc_420 Mar 25, 2016. 8 Replies

Weed eater strings and tuning.

Started by Poppy. Last reply by Murdoc_420 Feb 29, 2016. 7 Replies

Bass Uke string question(s)

Started by Lane Martin. Last reply by Where's Uranus? Jan 7, 2016. 6 Replies

Looking for 2 string bass plans

Started by Mike. Last reply by Mike Jan 6, 2016. 8 Replies

UBass strings

Started by Bobby Fields. Last reply by Bobby Fields Dec 11, 2015. 3 Replies

First bass build got a few questions .

Started by Piht Bull (Delta Dawg Guitars). Last reply by Scott aka Farmer Ted Apr 23, 2015. 23 Replies

bass frets...

Started by john mackay. Last reply by john mackay Feb 4, 2015. 4 Replies

Blog Posts

Let’s talk Aeolian…

Posted by BrianQ. on August 27, 2022 at 12:05am 0 Comments

Building a Violin w/ GITTY Parts

Posted by Brad Craig on August 11, 2022 at 6:39pm 3 Comments

Effects Pedals

Posted by Trey Allensworth on May 26, 2022 at 10:04am 12 Comments

Latest Activity

AGP # liked Randy S. Bretz's photo
28 minutes ago
AGP # liked BUGGY (C)'s video
29 minutes ago
Randy S. Bretz posted a photo

Just the coverplate and strings yet!

Had to replace the piezo cable with a piezo rod. Bad cable!
33 minutes ago
Infirmity Citrus President replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
"I was thinking, buy it, add two necks, tune one each EBE, DAD, and DGD. This is Soviet era, so not…"
48 minutes ago
BUGGY (C) posted a video

Swampy Resurrection - (The journey)

Finding the Swampy again... I did a similar video yesterday but it strangely deleted itself as all strange things that happen whjen you pull out your swampwi...
51 minutes ago
Infirmity Citrus President replied to Infirmity Citrus President's discussion Your take on this bizarre guitar
52 minutes ago
BUGGY (C) replied to the anonymous pick's discussion SWAMP WITCH GUITARS UNDER NEW OWNERSHIP
"But what about the genuine Swimpwatch carboard knockoffs copies!. Hey Pick end of an era man, I…"
1 hour ago
Doug Thorsvik commented on Poorness Studios's video
Thumbnail

Make a 2-string Chugger from a 30" Canoe Paddle!

"If you get a hankering to do it sometime, just let me know. I have more fishing line than I will…"
6 hours ago
Doug Thorsvik commented on Poorness Studios's video
Thumbnail

Make a 2-string Chugger from a 30" Canoe Paddle!

"You are correct Kale, you need longer scale lengths for fishing line to get low notes. For a…"
6 hours ago
Jerry Draper left a comment for BrianQ.
"Thank you"
7 hours ago
Uncle John commented on Steve Holladay's video
Thumbnail

Jacob Barker Music Festival Guitar

"Sounds bluesy good to me!"
8 hours ago
Uncle John commented on Poorness Studios's video
8 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->