Ready to finish up my current CBG and pausing because it's still too cold to work in the garage to apply stains and varathane on the neck. Doing so in the basement right now not an option a) might blow me up b) would smell up the house. I will add that I do have a 7x12 garden shed next to the house.

Polling for comments on how others in the group deal with this issue. In the meantime starting another ;-)

Views: 290

Replies to This Discussion

I do mine in the basement. It doesn't stink the house up.

Thanks Neil - do you have a vent hood exhausting to the outside or just open a few windows? 

I have a window right above where I do my staining ect... that does the trick.

You do have to have some heat. I think 15 degrees is required ( would have to look at the tin to be sure). I did one just prior to last Christmas. It had been commissioned so it had to be done. I did it in the bathroom. The odour was not bad. When I do mine, the first couple coats are thinned with mineral spirits, which would be worst than straight varnish. You are only using about 2 tablespoons of varnish mix for the first coat or two and then only a tablespoon for each coat after. You are probably right that the basement might not be best, especially close to the hot water tank with a pilot light.

David - thanks for the feedback. I hadn't thought of thinning the first few coats. Thanks for the idea

I thin the first two coats half and half with mineral spirits. I sand between coats. Come the third coat, I am using about three quarters to quarter varnish to spirit. It flows smoother when thinned, especially if it is cool, which happens a lot here. Apparently this is the same technique used if you want to do brush laquer. It takes about two tablespoons total to the first coat and less for each coat thereafter. I am sanding down to 400 grit. I don't think you can get down much further with poly eurathane. You can't buff it out like laquer, at least not soon after it is done. My understanding is the varnish keeps curing for some time. I would love to hear if someone has buffed out this type of varnish after the guitar is say a year old and the varnish much fuller cured. I am using high gloss. Others seem to like flat.

Thanks Dave - very helpful!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Greetings from Surrey, BC

Started by Graham Wedepohl. Last reply by Robbie Dec 16, 2019. 10 Replies

2 string G Bass

Started by john kendall. Last reply by Robbie Dec 16, 2019. 3 Replies

Selling your CBG'S

Started by Robbie. Last reply by Robbie Oct 21, 2019. 1 Reply

Hello fellow Canadiansversion of myAlber

Started by marc dallaire. Last reply by Erasmo Coco Sep 25, 2016. 2 Replies

Live and Learn

Started by Peter Bulback. Last reply by Reeds Taylor Mar 13, 2016. 2 Replies

Hello from Niagara-on-the-Lake

Started by Bill Short. Last reply by Bill Short Feb 16, 2016. 7 Replies

Need wood cigar boxes?

Started by Elissa. Last reply by Elissa Jan 25, 2016. 2 Replies

Sunny Okanagan

Started by BP - RabidSalad - Aug 15, 2015. 0 Replies

Greetings from Port Hope, Ontario

Started by Mark William Noel. Last reply by Tommie Tomlin Apr 22, 2015. 16 Replies

Where do the Canucks source their woods?

Started by Greg Potts. Last reply by jawbone Feb 11, 2014. 24 Replies

Bean Blossom Main stage

Started by jawbone. Last reply by jawbone Sep 5, 2013. 1 Reply

Hand Wound CBG pickups by Farmer Ted's CBGs

Started by Scott aka Farmer Ted May 14, 2013. 0 Replies

Blog Posts

How to add photos?

Posted by Stephen Sell on January 13, 2022 at 1:19pm 2 Comments

My first 3 string cigar box guitar

Posted by Stephen Sell on January 13, 2022 at 1:16pm 1 Comment

Shedding a Tear for Dave Lynas

Posted by Poorness Studios on December 20, 2021 at 8:30pm 4 Comments

Latest Activity

Doug Thorsvik commented on Kim Mosier's photo
Thumbnail

2DC0A094-9423-4F75-8184-5E4BA1CDF30A

"Clean build; looks sharp! I love slotted headstocks. Great job Mosz."
13 minutes ago
Randy S. Bretz posted photos
2 hours ago
Jim Tomsovic posted a photo
2 hours ago
Uncle John commented on Uncle John's video
Thumbnail

Roll & Tumble Blues

"Thanks, Andries, from my thumb and from me. "
3 hours ago
Kim Mosier commented on Kim Mosier's photo
Thumbnail

2DC0A094-9423-4F75-8184-5E4BA1CDF30A

"Poplar neck and fretboard. Stained fretboard. My first slotted headstock used drill chisel and…"
3 hours ago
Kim Mosier posted photos
3 hours ago
Lappy commented on Lappy's photo
Thumbnail

reso1

"The bowl is a dog food bowl I bought at the dollar store."
4 hours ago
Gary O'slide posted a video
4 hours ago
Chad McKeown liked evanmars's profile
5 hours ago
Uncle John commented on Uncle John's photo
Thumbnail

Meatloaf has died.

"Good response, Alan!"
5 hours ago
AGP # commented on Uncle John's photo
Thumbnail

Meatloaf has died.

""Bat Out of Hell", I think that's where this Covid thing started !!!"
5 hours ago
AGP # liked Uncle John's photo
5 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->