Hello fellow banjo players
I just finished my first musical instrument. A banjo with a skateboard fretboard and a tambourine as a resonator. I have never build an instrument before. Nor can I play anything but a flute back from school. Way back from school.
The banjo is a 4 stringer. 19 frets. The scale lenght is 25" (64cm to be precise) and a 10" tambourine with a plastic skin(head). I got some Deering Tenor strings 0.010, 0.016, 0.024, and 0.030w. I want to tune it to DGBE.
Now my question and my problem:
When tuning I realized I had to turn the pegs so much I fear of breaking them. Also the skin of the tambourine is dented pretty hard. I even fear of breaking this.I guess it is pushed down by the bridge around 1/4". (6-7mm).
Is this normal? Should I use other strings? Or can I just put a wider space under the bridge so that the presure is distributed more evenly?
I also have a backup set of 5 strings Medium from Deering. 0.010, 0.12, 0.16, 0.024w and 0.010.
Before I installed the plastic skin tambourine I had a cheap natural skin tambourine for 10$ but after one hour with strings setup the skin tore through the pins on the side and got loose a little so I decided to replace it.
Old tambourine with damaged skin. The wood also seemed very cheap.
New banjo with plastic skin tambourine
In this picture the strings a relaxed and far from being in tune.
I have tried further around and have clamped a piece of firm foam material under the plastic skin, where the bridge is. The plastic skin doesn't push that far anymore and it still sounds like a banjo. But I have problems tuning the strings. Or at least I think that I have problems because if one string is tuned and I tune the next string, the first string is tuned wrong again.
But I am also a total guitar beginner and don't know much about building and playing guitars.
What am I doing wrong? Who can help me?