Replies to This Discussion

Permalink Reply by Pickedmoor Jon on August 8, 2019 at 10:12pm

Hi James,

your amp is 40  watt unit and the Gitty amp kits are 2.5 watt units. Smokey amp kits are 1 watt. I guess you are not into soldering or have that much experience with electronics. Start looking in those thrift shops again. The alternative is to build your own, there lots of ideas on here and lots of kits you can buy on the interweb, best of luck

Permalink Reply by James Conder on August 9, 2019 at 6:25am

Thanks. Yeah, not all that knowledgeable on electronics, and my soldering is kind of hit and miss.

Permalink Reply by BrianQ. on August 25, 2019 at 6:57am

You can put anything in it, really? Don’t worry about the wattage. Any amp circuit can be used if it’s 40w or less?  If a Smokey can drive a 100w 4x12 cab, then it can drive a 40w speaker, it’ll only use 1w of output instead of the full 40 watts? Go for it!

Permalink Reply by James Conder on August 27, 2019 at 3:05pm

Ok cool. Thanks. I hate to waste a good cabinet and speaker.