When making an battery-powered amplifier out of a wooden box, is it necessary to include a ground other than that coming out of the negative side of the battery?
Do some of you fix a piece of metal in the box and also ground to that? Does it need to be a big piece of metal?

Has anyone created nice builds without a chassis ground?

Has anyone solved a buzzing or problem by installing a chassis ground?

Please let me know, and thanks for any input you can provide. The amp in question will be powered by a 9 volt battery and is a build with two bridged LM386s chips.

Views: 315

Replies to This Discussion

No extra metal ground plate, etc. is needed in those style amps. Just be sure of continuity between the jack neg., the battery neg., the speaker neg., volume pot, and the two pins of the LM386 IC that are to ground. In most of those, it is the 2 and 4 pins. But on the bridged pair of LM386, it may be different.

One note: with two LM386 chips bridged, a single 9 volt battery will drain rather quickly. The one bridged IC circuit I have seen suggested using a regulated 9 volt adapter (wall wart).

I have been building single LM386 amps for years, and have not been inclined to go with two chips. The singles sound great when matched with a good speaker (easy and cheap to find at a thrift store). I also add a line out switch and jack, so the amp can drive an external 8 ohm speaker. This one has a 6 inch speaker in a large wine box. I have it's twin, with an 8" speaker.

And this is the circuit I have used. Easy and works well. To add a line out feature, just send the signal from the negative side of the 220uF capacitor to the center pin of a DPST switch. Then each of the outer two lugs to either the speaker, or an ext. jack.

Thank you very much for your reply and the diagram! I was hoping this was the case. I've done a few single-chip amps, so am looking forward to seeing how much oomph bridging two chips will deliver. It was hanging in the back of my mind: "You've never done a chassis ground. Maybe you need to," so I appreciate hearing from someone with a lot of experience!

The "oompf" will more likely come from speaker selection and the choice of box. Smaller boxes are nice and all. But without the extra surface area offered in a larger box, the next best thing is having the line-out option so you can drive an actual speaker cabinet. I have a pair of vintage stereo speaker cabs (one in my shop, the other in my room) that measure 18"w x 12" deep x 30" tall, each with a 10" 35 watt speaker. That small 1/2 watt amp sounds huge through them, with full range of tone.

Best luck with the dual chip. I look forward to hearing how it sounds.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

Ruby Amp

Started by BrianQ.. Last reply by BrianQ. May 19, 2020. 6 Replies

Smokin' amp (literally)

Started by James Conder. Last reply by James Conder Aug 27, 2019. 4 Replies

Simple Headphone/Practice Amp

Started by BrianQ. May 17, 2019. 0 Replies

Problem with second-hand amp.

Started by Arthur Payne Apr 1, 2019. 0 Replies

Artec Amp Help!

Started by Jesse Lively Sep 10, 2017. 0 Replies

LM386 N-4

Started by Denis U. Last reply by Richard Haas Dec 3, 2016. 4 Replies

History Mystery--Orrtronic Tube Amplifier project

Started by Scott aka Farmer Ted Nov 17, 2016. 0 Replies

Dual IM386 Chip amp

Started by Paul Craig. Last reply by Paul Craig Nov 3, 2016. 31 Replies

Amp Speakers

Started by Primitive Acoustics. Last reply by Primitive Acoustics Mar 9, 2016. 3 Replies

Grounding for Cigar Box Amps: Chassis Ground?

Started by Erik Bell. Last reply by Scott aka Farmer Ted Dec 20, 2015. 4 Replies

Neat amp components

Started by Surly. Last reply by Alan Steeg Oct 27, 2015. 1 Reply

can a dab radio be turned into an amp

Started by Coventry Halfpenny guitars. Last reply by Pickedmoor Jon Oct 20, 2015. 3 Replies

SDA-T Questions

Started by alectron. Last reply by Zac Ray Sep 2, 2015. 10 Replies

HI - New guy & And speaker question

Started by Henry S. Last reply by Henry S Mar 25, 2015. 4 Replies

Are Pre-fabbed LM386 Moduals Worth Trying?

Started by Scott W. Last reply by Henry S Mar 24, 2015. 6 Replies

Powered sub to amp ??

Started by wormil. Last reply by wormil Sep 3, 2014. 2 Replies

Amp and speaker INSIDE the guitar?

Started by Greg Potts. Last reply by Ron "Oily" Sprague Jul 1, 2014. 1 Reply

trying to hack an old valve radio, into a guitar amp,

Started by GARAGE HERMIT. Last reply by GARAGE HERMIT Apr 29, 2014. 108 Replies

Best mini amp KITS

Started by MichaelS Country Boy Guitars. Last reply by Henrik Johansson Mar 10, 2014. 34 Replies

amp wiring help

Started by HarleyTodd. Last reply by Bernie Mango Feb 26, 2014. 18 Replies

Latest Activity

BrianQ. replied to Dan's discussion Boxes no stamps
"Also, search “how to remove labels” here & you’ll probably find some info,…"
2 hours ago
BrianQ. replied to Dan's discussion Boxes no stamps
"There is no such thing, it’s been a regulation since before we were all born? The all wood…"
2 hours ago
Korrigan posted a video

Santa Sings Santeria by Sublime

I don't know where yer from but round these parts this is considered a Christmas carol. :DHappy Holidays Everybody!
4 hours ago
Silent Jim posted a photo

Wes Carl Slide Amp and Boost

Fly away home Brotherman...I love you.
7 hours ago
Dan posted a discussion

Boxes no stamps

Hi all!Any info on boxes with no tax stamps or cautions.Thanx in advance!DanSee More
7 hours ago
Dan liked Dan's profile
8 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Whatyoumaycallit BCB 2022

"thanks AGP# ! thats a nice one  aswell , Will keep that one in mind…"
8 hours ago
Taffy Evans replied to Engblom's discussion Pickup type and placement
"Hi, I thought I would show how I mount pickups in my CBGs and still keep the top free of any…"
9 hours ago
Gary W aka Rev. Bluejeans commented on Vladimir Mazic's photo
Thumbnail

My first CBG

"Really nice, especially for a first build!  Welcome to the addiction!  (It's a good…"
9 hours ago
Taffy Evans commented on Rich's photo
Thumbnail

cloth box headstock view

"Hi, looks good to me, as long as the string stays in its groove, all good. OR... you could wind the…"
9 hours ago
Gary W aka Rev. Bluejeans liked T-Gripped's photo
9 hours ago
Gary W aka Rev. Bluejeans commented on Brian Fink's photo
Thumbnail

IMG_20221126_043720051

"Great repurposing!  Looks awesome."
9 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->