The early kick drums were made from wood. Back in the day big band sounds were really popular and room for 4 or 5 drummers was not possible. They needed a way to save space and the drum pedal way the answer. Now drum pedals are made from metal. I have some friends who are drummers and they have broken the metal ones kicking too hard. The wooden drum pedal I designed is for someone sitting on a suit case or cajon and stepping with their heal.
Start by downloading my hand-written parts PDF and then follow the photos/captions below.
Attach sides to base
Use the hinge to reconnect the foot pedal
Attach the small 5 inch piece of scrap to the front of the pedal, this should stick out about 1 1/2 inches
Place the pedal on top of the base, secure with 2 screws at the heal of the pedal
Slide the dowel into one side of the side piece.
Slide the beater holder on with the courier facing away from you. Small piece that holds the rubber band goes on the end. You will need to counter sink and drill them into place when you get them into the correct position.
Here is the correct position. I would wait to screw on the beater piece until closer to the end when the extent in is connected. See the small hole in the scrap wood attach the connected there.
Now connect both pieces and secure the beater holder. The holes need to be big enough on the connecter that they move freely but small enough to stay on the screw.
To make the beater I drilled a hole in a piece of 2 x 2 and sanded it.. The beater could be anything a spoon, no rules here.
Attach the cup hook, I used an eye hook and cut some out be use that's what I had.
Add the rubber band and your done.
Replies
using Chrome on a PC when i click the DOWNLOAD button it opens the PDF in a new tab. i then have to do a manual download.
What browser are you using? are you using a PC or a tablet? If you are using an ipad then i cant help. no one knows where the files get saved in ios.. lol
Just downloaded with both iPad & Android tablet, so no problems? Maybe you need to change your browser settings, are you viewing in Desktop or Mobile ?
Near the top of page one, there is a big red button to download the plans.
Sorry I was so long winded. I didn’t realize you couldn’t open the file.
Hey Jeff I sent you a friend request with my email attached. If you want I can send you the pdf.
Hey Jeff,
im not sure how I would update the plans. What information am I missing? It is a hand drawn plan….in the spirit of cigar box guitar all you need to do is print out the free plan. It prints to scale. You can add or take away. It gives you a free hand in the creativity of its creation. It is exactly the plan I used to make the original. I challenge you to print it out and build it just like it is. Because like building a guitar from a box you can build this anyway you want to. There are no rules! Let me know if you have questions I will be happy to help!
-
1
-
2
-
3
-
4
-
5
of 5 Next