This could be git related or not. So, what's on your workbench at the moment?
I have 4 scarf joint necks in different stages of work.
A 25" scale pine 5 string neck for a Banjo-Res, A 25" scale Red Oak neck for my 6 string Strat-Res build, A 24 & 1/2" scale Red Oak neck for my 6 string Double Cut Tele build and a 27" scale 6 string Baritone Conversion neck for a Modern Strat body I have.
Whenever I go printer shopping, I look at the ink for it and the price before I buy the printer.
Those refill kits only work a couple times because the jets clog with use and the cheaper already refill cartridges can be a bit of a roll of the dice.
Open the door and place a hand on each side of the window, griping the window and push upwards while someone pushes the up button. If that doesn't do it, you'll need a new motor. Could also be that the motor just needs new brushes.
Window is down inside the door. I know my limitations and impatience. Best to leave this up to folks who know what they are doing. It's always been easer and cheaper to let someone do it. Way cheaper than having someone first fix what I broke trying to do it. : )
Yeah that's going to require taking the door apart.
I spent 14 years rebuilding Alternators, Generators, Starters, lawnmower starters, pump motors, windshield wiper motors and window motors and wiring automotive and heavy equipment. Dump trucks were the worst to work on. Always had a bunch of jack legged work done, driver always in a big hurry and enough dirt covering everything to fill a grave. I take that back, the worst thing to work on was a garbage truck.
That looks very good so far Jerry.
Those types of kits(hollow body/semi-hollow body) can be very hard or tedious. How has it been for you? And is it a good kit to get?