I have been building and experimenting for a couple of years now.
1) I am curious for peoples thoughts on the best set up heights for the nut and bridge.
2) Having experimented with many materials, what is the best nut material and bridge material?
Tags:
As a first step, for the nut I use an old blunt jigsaw (aka sabresaw) blade that I found was just a touch higher than my frets. To check, put it between two frets and get a short straight edge/fret rocker if you get a little bit of rocking, I covered one side of the old blade with masking tape to minimize the chance of scratching the fretboard. Then I hold that against the nut and cut my string slots with a junior hack saw, stopping when the blade hits the old blade. I then adjust the width of my slots as necessary. At this stage the instrument is ready for stringing up.
I then follow up with the universal third fret method on all my builds. You press down between the second and third fret. There should be a slight gap of a gnat's whisker between the string and the first fret. Old time builders tested with a cigarette paper. I just make it really really close but without touching. Given the above step I usually don't have much to do.
This is how all instruments I build from bass ukuleles to Tahitian ukuleles are set up at the nut. No exceptions for instruments needing fingered frets. Slide or fretless can be higher.
Action (at the 12th) varies between instruments from 1.5mm on Tahitian ukes to 6mm for bass ukes and in between for everything else. It is more of a taste and playing style thing. If fret noise is your thing (I call it fret growl on bass ukes) make the action lower. If your frets are a little uneven leaving the action a little high can compensate for that.
Thanks for the tip, Titch. Guess I've been pretty Damn lucky so far, using the "eyeballing and feels right" method. I like your method better. I couldn't get my first one to sound right now I know at. Thank you again.
Someone revived an old post.
On the cheap rosewood or Ebony for both saddle and nut, easy to shape and cut string slots nice warm tone.
Bone blocks for nuts work great for 3 and 4 string bridges. There is a reason guitar company's use tone wood and bone.
Bolts look great but don't transfer vibrations very well, I think in the last 7 years we have all learn this but still use them. We all have a box of old bolts.
On fretted necks use a headstock tuner to set string height, check intonation between open note and the 1st fret if they are not correct none will be. I didn't have a clue 7 years ago.
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray on Tuesday. 11 Replies 0 Likes
Started by Bill Andy in Performances, How to Play, Lessons, Concerts. Last reply by Taffy Evans on Sunday. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray Apr 26. 8 Replies 1 Like
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Southern Ray Apr 26. 6 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 25. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango Apr 22. 4 Replies 0 Likes
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!