So today i saw a video of shane speal, in which he told about the whammy bars they sell at C B Gitty, i emediately went back to my old design. I am planning on using a rod thru the thru body part to attach the pivot point, one of the bolts that attach to the bridge will extend out so i can attach an arm to it.

I challenge anyone who's intrested to make a better design!!!!


Views: 1406


Reply to This

Replies to This Discussion


why should i lose the springs? the bottom of the bridge has special string attachment thingie, and i think that the springs would give me a better whammy dive, thats what im after

I love this git! Blue ribbon build.

thanx  ;-)

Looks like a good bit of planing went into this. Do you have a problem with string wear?

Looks great with that box.

no  issues with   wear  . the  lower  bar   has a   metal  rod   under  it, the   strings glide across  it  nicely  .  i  think i  used a  smooth nail  . the  wooden  bar  hides  it  . the wood  bridge   holds  up  nicely too.  only  issue  is  the axle  needs  some veggie  oil  now  and then   or the wood  "creaks "  .  and  like  most  whammys ,   sometimes  ya  gotta   spank it  back in tune . ;-)

That's a smart design. 

Mine also needs to be pulled up to return to correct pitch now and then. The bolt bridge is supposed to move back and forth in the nuts with the string movement, but doesn't always. It might work better if the springs were under more tension.

Have you seen these little guitars?

yeah  , saw those (or  similar  ) on  here a while ago   .  they  yours  ? 

Not mine. Could make one fairly cheap though. :)

indeed .   here's some spring-less stationary  whammys  i   have made . no springs  ,  they are  just  just  "benders" and  "lifters" . 

made from 3  kitchen pulls . 

brass parts . coat  hook  , bell handle , and  candle  plate 

gate latch

coat hook 


Those are really nice. Back in the 80's I had a Kahler tremolo that I loved. It used a cam that was spring loaded, but it was so smooth and always returned to the right pitch. Only negative was the size of the thing. Would love to make one on a smaller scale.

I made one last summer on my Green CBG out of a door hinge and some springs.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Busking Songs...

Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Wednesday. 7 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

Southern Ray commented on Doug Thorsvik's video

Don't Worry Be Happy: 3D Printed Cigar Box Guitar

" Now that is the way it should have been done. Never cared for the original. Thanks!"
2 hours ago
Rich Butters replied to Rich Butters's discussion UK - Best Place to Buy Cigar Box's
"Cheers mate.  I will look"
3 hours ago
Southern Ray commented on Gary O'slide's video
4 hours ago
AGP # commented on Doug Thorsvik's video

Don't Worry Be Happy: 3D Printed Cigar Box Guitar

""Well Done Again Slingers", I remember when this Catchy Little Tune first came out,…"
8 hours ago
Slow Mick posted a status
"New Lesson-Chords for "What'll I do"(Irving Berling) from Slow Mick. MIDI pick-up."
11 hours ago
Gary O'slide posted videos
13 hours ago
BrianQ. liked Doug Thorsvik's video
14 hours ago
A.D.EKER commented on A.D.EKER's video

Up the Hill A D Eker 2024

"Hello John !yup it plays suberbe, just the sticker artwork is bad qualety ,the build is marvelous!…"
14 hours ago
Moritz Voegeli and Matthias Bichsel are now friends
18 hours ago
David L. replied to Rich Butters's discussion UK - Best Place to Buy Cigar Box's
"I have found these are…"
19 hours ago
J. D. Woods replied to J. D. Woods's discussion Are metal frets necessary?
19 hours ago
Doug Thorsvik posted a video

Don't Worry Be Happy: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 198th Zoom Mtg 04/15/24. Only 1-finger chords, free songbooks here: CBG Songbook.pdf...
19 hours ago


© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->