Hey my wonderful friends!

About to start my second build and I have two cigar boxes but they are fairly small, prob OK for a diddley bo but too small for a 3 or 4 string!

So I'm considering glueing two boxes together which as it happens would be a perfect size, now my question is? will there be an issue acustically with the sound vibrating out of the boxes? because of a partition between the centre of the finished guitar box?

If so any way arround the prob?

much appreciate any advice in advance!

Thanks

Views: 576

Reply to This

Replies to This Discussion

Are  you planning on stacking them one on top of the other or end to end? I'm guessing end to end. You could cut a large opening in the ends where they meet , making it one larger box. I did a 3 box dulcimer and "ported" the ends where the boxes meet.

Yes they will be end to end!
Can you explain exactly what you mean by cutting opening?
They can't be completely opened as I assume I'd need enough surface to be glued!!

WEll, I thought I have a photo of the inside but can't find it now. I cut most of the ends off of the boxes but left a flange about 1/2" around the ends. I made a cardboard template of the size I wanted the opening and also to make sure the openings and the flanges lined up. Then I drilled through the flanges and bolted the boxes together with machine screws, nut and washers. I then put CA glue on the ends of the threads so that they will not vibrate loose.

Yes very similar to what I'm doing although they side to side as opposed to end to end! Pity you lost the inside pick be nice to see! Ps pretty cool guitar!:-)

If I get a chance I can remove a few screws and take a shot inside if you want. All 3 boxes will open together!

If its not any trouble that would be great but I dont want to put you out either!

This has boxes one on top of the other lined with thin ply, you could use the same method end to end

Thanks

that looks really sturdy very well done!

thanks for the pic!

It helped that the bottom box was the type where the lid sits on top of the box rather than between the ends like the one used for the upper box (that's as clear as mud, hope you know what I mean)

Hey Scruggy! I'm a new member and had problems logging in, so you probably already got your answer and are on your way. I wanted my first post to help someone out like all of you have helped me. I just did a two-box join dulcimer and it went great - solid as a rock, glued only. Didn't use the lids (used a solid cedar soundboard) just the boxes. You can see the build on my fb page at roughcutguitars. Just scroll down to the start of "mystery build". If you want any tips from what I learned just post - I'll check back, but it looks like you got all the help you need :-) Best, Tom

Thanks for your reply Tom, will check out your mystery build! thanks again!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Forum

Beginner advice

Started by Michael Myers in Performances, How to Play, Lessons, Concerts. Last reply by Timothy Hunter Apr 25. 3 Replies

CallyFest 5.

Started by Richard Sundberg in Fests and Concerts: Organizing and Promoting. Last reply by Taffy Evans Apr 5. 22 Replies

Which G is the G in GDG?

Started by Infirmity Citrus President in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. Apr 5. 4 Replies

Build This Simple Cigar Box Uke for Under $20!

Started by Cigar Box Nation in Feature Articles. Last reply by Wanhavihtahousu Apr 1. 9 Replies

Latest Activity

AGP # liked Rich's photo
1 hour ago
AGP # commented on James O Lunsford's video
Thumbnail

Rainy Day Blues

"Appropriate Song also for me in the Land Down Under James O, just had a week of rain down here,…"
1 hour ago
AGP # liked James O Lunsford's video
2 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP #466 - ''Theo''

""Thanks Ron", the solid body gits are well worth having a go at, have done quite a few…"
4 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP #466 - ''Theo''

""Thanks A.D.", No 78 Records were harmed in the construction of this build, purchased…"
5 hours ago
Rob Uker commented on A.D.EKER's photo
Thumbnail

High Tech Head

"That’s crazy."
5 hours ago
AGP # commented on AGP #'s photo
Thumbnail

AGP #466 - ''Theo''

""Thanks Doug", have used my Pyromaniac Expertise on a few builds over the years. ;-D"
5 hours ago
RON NORTHCUTT commented on AGP #'s photo
Thumbnail

AGP #466 - ''Theo''

"That is a very nice build, I have never done a solid body. May have to give it a go."
6 hours ago
Rob Uker posted a photo
7 hours ago
Rob Uker posted a photo
7 hours ago
Rob Uker posted a photo
7 hours ago
Rich posted photos
11 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->