Hello all of you knowledgeable instrument builders,
After building three four string guitars, a three string guitar, an eight string mandolin, an ukulele, and a diddley bow I feel ready to graduate to building a six string.
The only problem is that I'll need a truss rod for that and I do not have any power tools (except for a drill). So how do I cut a straight and even truss rod groove without a router?
Any suggestions?
My only idea so far is to make a three part laminate neck with the middle part the same width as the square metal rod I want to use as a nonadjustable truss rod. Something like the sketch below.
Do you think that would work? Has anybody done this successfully?
Tags:
I've built 15 guitars. I don't use truss rods. I bury a length of 1/2" square tube in the neck. None of them have moved yet.
If there is a high school in your area that has a wood shop, ask the teacher if someone could rout out your neck for a truss rod. You could offer to give a talk on what you are doing. There might even be students who would be interested in building cigar box guitars. I think most shop teachers would be interested in community involvement.
You can get double-action adjustable truss rods quite cheaply on Ebay.
Although I routed out the slot on my 6-string, from the rear, I don't see any reason why you couldn't laminate a neck around the truss rod.
Access to the adjustment screw is via an Allen key through a hole in the front of the headstock.
You sir are correct, cross grain laminate is strong enough to leave out the metal bar,., but I guess this thread is about installing a bar...
Well, you could always redneck it and chuck your drill in a vice, zip-tie the trigger and run it by hand under the bit. may not be perfect, but aint that kinda the point of a CBG?
Hi, Just done this job today and it fits in with this thread, so I thought I would post my process.
The finger board was off due to the neck bowing up, so after straightening the neck I hand cut the slot sides with hand saws and chiselled out the waste to fit the reinforcement infill. I made a depth gauge out of brass to fit the 1/16 chisel so I could scrape the bottom of the slot flat and level.
Easy peazy. Taff
I suppose you could use a chisel, then fill the trough with epoxy for a tight fit?
Inspired by this thread I've just completed a neck for a 'normal' 6-string guitar, using an adjustable truss rod within a laminated neck.
The guitar had yet to be completed, but it looks OK so far!
Tim
I taped little bits of card to the top of the rod to increases its apparent depth. This allowed me to true up the top of the neck with a little bit of leeway.
An access hole for the 4mm Allen key for adjustment.
Hi Tim, that all looks good, but an observation if I may. I feel it would be more beneficial to use a wood infill on top of the rod. Over time the cardboard is liable to compress and leave you with a loose rod. Also the rod is then pushing against the fingerboard and not, maybe, the air gaps.
Just a thought Taff
My fault Taffy,
I did remove the bits of card prior to gluing it all together.
Any rattles can be eliminated by adding a little bit of tension to the rod.
Tim
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 7 minutes ago. 4 Replies 0 Likes
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by A.D.EKER yesterday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!