Thinning headstocks - Cigar Box Nation2024-03-28T13:54:57Zhttps://www.cigarboxnation.com/forum/topics/thinning-headstocks?commentId=2592684%3AComment%3A3725599&feed=yes&xn_auth=noSome nifty ideas here, thanks…tag:www.cigarboxnation.com,2022-09-19:2592684:Comment:37274142022-09-19T09:21:31.006ZDavid Boweshttps://www.cigarboxnation.com/profile/DavidBowes
<p>Some nifty ideas here, thanks. I use a bandsaw.</p>
<p>Some nifty ideas here, thanks. I use a bandsaw.</p> Thanks for all the input! I e…tag:www.cigarboxnation.com,2022-09-12:2592684:Comment:37265332022-09-12T17:10:17.907ZEric Lettauhttps://www.cigarboxnation.com/profile/EricLettau
<p>Thanks for all the input! I ended up making a simple jig, used angle grinder with a 40 grit flap disk that did the bulk of it then palm sander with 80 grit. Got 25 done in 40 min.</p>
<p>Thanks for all the input! I ended up making a simple jig, used angle grinder with a 40 grit flap disk that did the bulk of it then palm sander with 80 grit. Got 25 done in 40 min.</p> tag:www.cigarboxnation.com,2022-09-12:2592684:Comment:37267042022-09-12T16:51:45.919ZBrianQ.https://www.cigarboxnation.com/profile/BrianQ
<p></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/10809865292?profile=original" target="_blank" rel="noopener"><br/> <img src="https://storage.ning.com/topology/rest/1.0/file/get/10809865292?profile=RESIZE_710x" width="360" class="align-full"/></a></p>
<p></p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/10809865292?profile=original" target="_blank" rel="noopener"><br/> <img src="https://storage.ning.com/topology/rest/1.0/file/get/10809865292?profile=RESIZE_710x" width="360" class="align-full"/></a></p> tag:www.cigarboxnation.com,2022-09-12:2592684:Comment:37265962022-09-12T11:26:08.354ZEric Lettauhttps://www.cigarboxnation.com/profile/EricLettau
<p></p>
<p></p> Thanks, Taff! I can apply a…tag:www.cigarboxnation.com,2022-09-09:2592684:Comment:37263942022-09-09T12:49:31.629ZCarl Floydhttps://www.cigarboxnation.com/profile/CarlFloyd
<p>Thanks, Taff! I can apply a couple of those techniques.</p>
<p></p>
<p>Thanks, Taff! I can apply a couple of those techniques.</p>
<p></p> Oops! you forgot something. T…tag:www.cigarboxnation.com,2022-09-07:2592684:Comment:37259612022-09-07T22:48:48.581ZTaffy Evanshttps://www.cigarboxnation.com/profile/TaffyEvans
<p>Oops! you forgot something.<br/> Taff</p>
<p>Oops! you forgot something.<br/> Taff</p> tag:www.cigarboxnation.com,2022-09-07:2592684:Comment:37260472022-09-07T21:41:30.299ZSal Monellahttps://www.cigarboxnation.com/profile/SalMonella
<p></p>
<p></p> Hi Eric, I’m not sure what to…tag:www.cigarboxnation.com,2022-09-05:2592684:Comment:37257092022-09-05T05:16:41.798ZTaffy Evanshttps://www.cigarboxnation.com/profile/TaffyEvans
<p>Hi Eric, I’m not sure what tools or machines you have on hand so it’s hard to tell you what to do, so I’ll show you the methods I have used.<br></br> The photos should give you some ideas. I always try to save the handcrafting work until it’s really needed, I use machines and jigs wherever I can, especially on repetitious work.…<br></br> <a href="https://storage.ning.com/topology/rest/1.0/file/get/10803649261?profile=original" rel="noopener" target="_blank"><img class="align-center" src="https://storage.ning.com/topology/rest/1.0/file/get/10803649261?profile=RESIZE_710x"></img></a> <br></br></p>
<p>Hi Eric, I’m not sure what tools or machines you have on hand so it’s hard to tell you what to do, so I’ll show you the methods I have used.<br/> The photos should give you some ideas. I always try to save the handcrafting work until it’s really needed, I use machines and jigs wherever I can, especially on repetitious work.<br/> <a href="https://storage.ning.com/topology/rest/1.0/file/get/10803649261?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10803649261?profile=RESIZE_710x" class="align-center"/></a><br/>
<a href="https://storage.ning.com/topology/rest/1.0/file/get/10803649288?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10803649288?profile=RESIZE_710x" class="align-center"/></a><br/>
<a href="https://storage.ning.com/topology/rest/1.0/file/get/10803649662?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10803649662?profile=RESIZE_710x" class="align-center"/></a><br/>
<a href="https://storage.ning.com/topology/rest/1.0/file/get/10803649854?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10803649854?profile=RESIZE_710x" class="align-center"/></a><br/>
<a href="https://storage.ning.com/topology/rest/1.0/file/get/10803650054?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10803650054?profile=RESIZE_710x" class="align-center"/></a><br/>
<a href="https://storage.ning.com/topology/rest/1.0/file/get/10803650280?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10803650280?profile=RESIZE_710x" class="align-center"/></a><br/>
<a href="https://storage.ning.com/topology/rest/1.0/file/get/10803650665?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10803650665?profile=RESIZE_710x" class="align-center"/></a><br/>
<a href="https://storage.ning.com/topology/rest/1.0/file/get/10803650688?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/10803650688?profile=RESIZE_710x" class="align-center"/></a><br/>
Cheers Taff</p> Can you post a pic of one? Th…tag:www.cigarboxnation.com,2022-09-04:2592684:Comment:37256072022-09-04T19:32:40.292ZBrianQ.https://www.cigarboxnation.com/profile/BrianQ
<p>Can you post a pic of one? That method knocks it out pretty darn fast, but I guess if you want faster, then you’ll need power tools? Do you thin them down beforehand, or do they? </p>
<p>Can you post a pic of one? That method knocks it out pretty darn fast, but I guess if you want faster, then you’ll need power tools? Do you thin them down beforehand, or do they? </p> Hand saw across evert 1/8” an…tag:www.cigarboxnation.com,2022-09-04:2592684:Comment:37254572022-09-04T17:13:01.176ZEric Lettauhttps://www.cigarboxnation.com/profile/EricLettau
<p>Hand saw across evert 1/8” and deep as I need then chisel and sand.</p>
<p></p>
<p>Hand saw across evert 1/8” and deep as I need then chisel and sand.</p>
<p></p>