I need some help here folks. Being from Alabama, I am having a little problem with the instruction manual that accompanied this amp. What I want is to be able to take an old Storm speaker box that I have and put this amp in it and use it on my way to stardom. I want to be able to take a 120v. A/C to D/C 12volt laptop power supply. (Which I have) I read it will run on 9-25 Volts D/C to run the amp, or hook it to truck battery when no 120 A/C available. I can figure out it will run 4-8 ohm speakers stereo @34 watts a channel. I have drilled and tapped threads in a heatsink and mounted it. Now I need somebody to tell me where to attach the wires so it will run one channel (mono) and where power +/- needs to go. Also where to attach +/- speaker wires. Got a couple of red LED 120mm fans to make this baby from frying. Anybody that can help me through this little language barrier, I would appreciate.

Views: 1060

Attachments:

Replies to This Discussion

Try google search..."TDA2030A Amp" english wiring diagram

My google is broke, if you enter TDA2030 Amp English wiring diagram. You will indeed get every place that chip is used. I looked through at least 12 pages before I realized that the subject matter was far above my common scope of perception. I tried to get more specific and  refine my search and I ended up in a Peugeot sound system. Last time I saw one of those Columbo was driving it. I need to be able to find the IC that I have. Good try though.(;-D)

Did you get a finished amp or is it a bag of parts kit? If it's finished then I believe you're stuck with whatever configuration (stereo/mono) that it's wired. (maybe)

Since you should be working with DC with either of your power options the red will be your power connection. The blue will be your speaker connections.

Once I know the answer to the which form of the amp you have question I think I can help with the speaker wiring.

It was real late when I made the post, so I thought I had missed the picture of the actual circuit board. The second image is the actual board after I had drilled and tapped the holes for the heatsink. Here is a side view that shows the RCA jacks for L & R speakers I have found several youtubes on different boards than the one I have and I don't want to be guessing. There are way to many people on here that don't have to guess..

Attachments:

Ron, I think you may have me in the ball park. I did a site search for a TDA2030A with 4 of them on the board. I have a 2 channel with 34 watts per channel. I know that is what the 2 RCA jacks are. I say ,I know, I really mean that is what normally done with a  red  and a white RCA jack. Red is right channel and white is left channel This site is the closest to anything I have seen do far, I will look closer tomorrow. Got Dr. appointment for a EKG in AM so that will pretty well waste most of tomorrow.Trying to read schematics on a cell phone in the waiting room would give me the DT's and run my blood pressure out of sight so I will look in PM.

 Keep in mind I'm a pure amateur to this but here ya go

Power - use the blue colored terminal block squared in red in the pic that is labeled for DC

Input - The RCA jacks squared in blue - you'll either have to make an adapter from some RCA cables or remove the RCA jacks and solder whatever jack to the connections at the board. You may have to double up your connections as that could be a right and left type input.Not sure

Output - the blue colored terminal blocks squared in green.

This is where I'm unsure of results as any of them I have looked at schematics for there is usually a slight difference in components between stereo and bridged (mono). You may be able to make it act like a bridged/mono amp by jumpering a neg of one channel's output terminal block to the the pos of the other channel's terminal block. Then use the remaining neg and pos spots for your neg and pos speaker wires respectively.

It isn't actually possible to jumper any of the speaker output connections together.  This is a stereo Bridge Tied Load amplifier, in which each speaker is connected across a pair of outputs.  That's why it uses four TDA2030As, as each chip drives one side of each speaker.  All the output terminals have to be kept separate for this to work. On the other hand it's OK to connect the two RCA (left and right) inputs together so they're fed with the same signal, it's only the outputs that have to be kept apart. 

In fact you could look at this amp as two pairs of bridged mono amps, where each speaker is connected across one pair.  Just thinking aloud...

That's where my amateur knowledge came into play as I don't know if you can continue to daisychain the opamp chips to gain any beneficial output.

Does that make any sense as to explain my thinking?

The thing is, the power available to push into a given speaker depends on the maximum voltage available to drive it . Suppose you have a +12V supply. One TDA2030A on its own will swing its output between roughly +2V and +10V (Don't know the exact figures but something like that). That's an ac voltage of 8V peak-to-peak. This would be connected through a large capacitor to the speaker, which would see a voltage that swung between +4V and -4V peak with respect to 0V. The Bridged Mono/BTL arrangement using two amplifier chips doubles the voltage across the speaker because when one terminal is at +10V the other is at +2V, and vice versa. Therefore the speaker gets +/- 8V across it, and four times as much power in it, but that's the best you can do, because no more voltage is available.

Makes sense, thanks for the explanation.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Discussion Forum

LM386 Amp w/ Switchable Clean Channel

Started by BrianQ.. Last reply by BrianQ. May 28. 1 Reply

Simple 1st Timer CBG Amp

Started by BrianQ.. Last reply by BrianQ. Sep 28, 2020. 25 Replies

Matching Speakers to LM386

Started by Southern Ray. Last reply by Southern Ray Aug 6, 2020. 11 Replies

Suggestions wanted for easy amp build

Started by Southern Ray. Last reply by Southern Ray Jun 16, 2020. 11 Replies

Ruby Amp

Started by BrianQ.. Last reply by Southern Ray May 17, 2020. 27 Replies

Low-Z pickup and components values

Started by Southern Ray. Last reply by Southern Ray May 13, 2020. 6 Replies

Oops

Started by Southern Ray. Last reply by Southern Ray May 3, 2020. 12 Replies

DIY Spring Reverb

Started by Kevin Keating. Last reply by Paul Craig Oct 17, 2019. 4 Replies

TDA2030A Amp

Started by Bama Hound. Last reply by Gary Stenzel Jul 23, 2017. 14 Replies

Home Brew Champ Tube Amp

Started by Scott aka Farmer Ted. Last reply by Paul Craig Feb 6, 2017. 3 Replies

Dual IM386 Chip amp

Started by Paul Craig. Last reply by Paul Craig Jan 27, 2017. 29 Replies

5 Watt Amp Kit (DIY Case)

Started by Walter Haapapuro. Last reply by Gene Jones Dec 7, 2016. 46 Replies

DIY reverb behold - I found this online

Started by Danny B.. Last reply by Paul Craig Nov 2, 2016. 3 Replies

Bass Cabinet project

Started by Murdoc_420. Last reply by Murdoc_420 Jul 16, 2016. 34 Replies

Kalamazoo Model 1 Deluxe

Started by Scott aka Farmer Ted. Last reply by Rick Alexander Jun 20, 2016. 12 Replies

LM386 amp and other stuff

Started by Denis U. Last reply by Denis U May 29, 2016. 19 Replies

Combo Amp Build

Started by Paul Craig. Last reply by Paul Craig May 27, 2016. 113 Replies

Blog Posts

Uncle Enos CBG Banjo Build

Posted by Greg on November 29, 2021 at 7:24pm 0 Comments

To Reach the Chord

Posted by Rich on November 12, 2021 at 10:20am 0 Comments

Seasonal build contest?

Posted by smilingdog1 on October 29, 2021 at 9:20am 9 Comments

Latest Activity

Bob "Ambrose" Negus liked A.D.EKER's video
13 minutes ago
Bob "Ambrose" Negus commented on A.D.EKER's video
Thumbnail

The Wheel of the World C. Underwood - A. D. Eker 2021

"Very nice rendition Andries! Great sound from that 4-stringer!"
13 minutes ago
Randy S. Bretz posted a photo

Baritone lap steel fretboard

Rosewood with dyed green coffee stir stick fret line`s and brass bar fret markers.
31 minutes ago
Bob "Ambrose" Negus commented on Dar Stellabotta's video
31 minutes ago
Bob "Ambrose" Negus liked Poorness Studios's video
37 minutes ago
smilingdog1 liked Doug Thorsvik's video
2 hours ago
smilingdog1 commented on Doug Thorsvik's video
2 hours ago
smilingdog1 liked Uncle John's video
2 hours ago
smilingdog1 commented on Uncle John's video
Thumbnail

Slow Country Dance -cover of a Mary Chapin Carpenter song

"I can't dance but I can fake it real slow."
2 hours ago
the anonymous pick commented on Corin Mitchinson - End's photo
4 hours ago
the anonymous pick commented on Doug Thorsvik's photo
4 hours ago
Doug Thorsvik posted a video

Feliz Navidad: Surf n' Turf 3-String Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 84th Zoom Mtg Nov 29, 2021. More info and free songbooks: https://sites.google.com/site/cigarboxguitarslingersspokane/home
6 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->