Amazing how some things that should be obvious are easily overlooked until they punch you in the nose.  

I just finished my 2nd CBG; a fretted electric with piezo pickup.  Thought it'd be cool to have the strings come up through the cover of the box a couple of inches behind the bridge.  Worked great until I tightened the strings up.  The tension on the strings tends to pull the box cover towards the head of the guitar.  Tried temporarily clamping the cover on the sides, just to keep it from moving, but then it is actually separating the top panel of the cover from the sides. 

You can kind of see what I am talking about in this picture.

I was thinking maybe just glue the box shut. But that won't work; I need to open it to change the strings!

Thinking I may just have to mount a tailpiece of some sort.

Views: 284

Replies to This Discussion

Ouch!

I guess I could say, "Thank you for making that mistake, so I won't have to."

You're quite welcome.  That's exactly why I posted this. 

Glue a brace into the 4 corners of the box and screw it shut from the top?

That was a thought.  You can see a couple of holes I drilled in the cover, but I didn't think of the blocks in the bottom to screw in to.  Might have to revisit that.  Need to find some sort of tarnished pewter or brass looking screws.

Sounds like you're on the right track. This is something I do with all of my cigar box builds, even though I generally don't run the strings through the body. If the box lid is nice and sturdy, you shouldn't get any rattles or undesirable vibrations, and you will get improved volume and tone. Good luck, and nice build by the way :-)

Since I've got the neck running through the body, I decided to just try to put a screw in at the tail end and another right behind the neck, seems to be doing the trick.  They are brass screws, I'll have to find a way to tarnish them a bit to look more like the rest of the guitar.

The neck actually rises about 3/16" higher than the top of the box.  It ends at the side of the box and is attached to another piece of wood that comes out about 2.5" towards the head and inside the length of the box along the bottom.

Good job, sounds similar to the way I make mine. Now we need a demo video! ;-)

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

 


Discussion Forum

beginner mistake

Started by r.j. hassler. Last reply by Thomas "Duck" Petry Jul 3. 1 Reply

Removing box labels

Started by Robert Dawkins. Last reply by Order99 Jul 6, 2020. 8 Replies

Build 2!

Started by Sean Murphy. Last reply by Sean Murphy Oct 28, 2018. 3 Replies

Can a box be too shallow?

Started by Sean Murphy. Last reply by ChickenboneJohn Nov 15, 2017. 2 Replies

Best/"Easiest " Way to notch out CBG Neck......?????

Started by Brian M Nusser. Last reply by ChickenboneJohn Nov 14, 2017. 16 Replies

First build, not-great results

Started by Sean Murphy. Last reply by Slow Blues Dani & Ol' Grey Bear Nov 14, 2017. 3 Replies

Neck length

Started by Holly Hodson. Last reply by Thomas "Duck" Petry Nov 9, 2017. 4 Replies

"If you wand to get something done real bad . . ."

Started by Michael Zimmerle. Last reply by Richard Dean Oct 23, 2017. 2 Replies

First build and a broken string.

Started by Dan Mullen. Last reply by Richard Dean Oct 23, 2017. 8 Replies

What type of saw to use?

Started by Anne M. Fridley-Owen. Last reply by Anne M. Fridley-Owen Dec 4, 2016. 3 Replies

*()@%&$! Piezo

Started by Chance. Last reply by Chance Oct 24, 2016. 3 Replies

general

Started by tommy farrar. Last reply by tommy farrar Nov 28, 2015. 2 Replies

Tail - or where the strings are mounted

Started by evanmars. Last reply by Richey Kay Aug 26, 2015. 7 Replies

My fifth build

Started by James A OBrien Apr 7, 2015. 0 Replies

Cardboard Cigar Box

Started by Redbelly. Last reply by Thomas "Duck" Petry Jun 30, 2014. 3 Replies

Just Finished My First CBG. YAY!!!!!!!!!!!!!!!!! (The Sequel)

Started by L. W. Carlson. Last reply by Thomas "Duck" Petry Jun 27, 2014. 3 Replies

Scale Length

Started by Wagner Richter. Last reply by Wagner Richter May 7, 2014. 3 Replies

Blog Posts

Uncle Enos CBG Banjo Build

Posted by Greg on November 29, 2021 at 7:24pm 0 Comments

To Reach the Chord

Posted by Rich on November 12, 2021 at 10:20am 0 Comments

Seasonal build contest?

Posted by smilingdog1 on October 29, 2021 at 9:20am 9 Comments

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Monkey Bizness C. Berry - A. D. Eker 2021

"There is! But lets say there is none clacking up? its acoustic even the solo, dubbed in afterwards…"
3 minutes ago
Keith Zorn commented on Keith Zorn's photo
Thumbnail

CBG 106

"The Headstock BrianQ is just glued wings added to the sides, shaped on the scroll saw."
1 hour ago
Keith Zorn commented on Keith Zorn's photo
1 hour ago
Sharon Litwak posted a status
"Thanks for the kind words. Everyone is always so supportive."
1 hour ago
AGP # liked Keith Zorn's photo
1 hour ago
AGP # liked A.D.EKER's video
1 hour ago
AGP # liked Poorness Studios's video
1 hour ago
AGP # liked Doug Thorsvik's video
1 hour ago
AGP # liked BUGGY (C)'s video
1 hour ago
Keith Rearick liked Gary O'slide's video
2 hours ago
Profile IconGlenn Hurst and Monkeyrick joined Cigar Box Nation
2 hours ago
Corin Mitchinson - End commented on Corin Mitchinson - End's photo
Thumbnail

4 String Kettle Thing.

"Cheers fellas. "
2 hours ago

Music

© 2021   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->