Alright, my first build is done, except for the high G string. It keeps breaking. I can't get past about a quarter step up from F before the horrendous "ping" of a broken string. I just got home from guitar center where I bought some Ernie Ball super slinky 11 gauge strings, tried to put one on, "PING". I have two more left, one in the pack, and one on the guitar resting at a quarter step down from F. What do I do?

Views: 417

Reply to This

Replies to This Discussion

It may be you are chasing the wrong 'g', ie, the wrong octave, a good rule of thumb way to overcome this is to tension the string [any string], until it just begins to sound full, and not sloppy, from there the next g or d you arrive at is the one you want. 

Depending on the sound you want, if your just after a GDg, why not use the A,D,G strings, just stop at G before arriving at A, for the base string, and the other 2 are designed to achieve the correct pitch. I do believe like stated by Daryl, your going past one g and heading for the next. And if you use the Ernie Ball strings, your g will be an unwound string still. When I use their strings, I use their custom/hybrid light strings, which starts at .009, I've actually went past the first g (using the .009) and actually hit the next one without breaking, but it was awful tight and hard on the fingers which is how I figured out what I did.

Thanks Richard, I should be heading out in the next few days to get a 12 string acoustic guitar, I'll be sure to grab a pack of strings when I do and give the ADG a shot .

also make sure your tuner is in "Chromatic" mode and not Guitar mode, since you are not tuning a standard 6 string....

Sounds like you may have a sharp point somewhere. I would look for sharp edges especially around the tail piece. 

I was tuning up a string, (low C from a cello string) and I was E-flat and going upwards and I got to thinking. Man, I've got a ways to go. So I found a "cello tuning" video on YouTube and, yeah, I was going for the octave above!

So check the dumb things first.

Like Richard says, use a .009 for the high G and it should work fine. If that breaks then you have a sharp edge somewhere.

I've broken stings trying to tune an octave too high so I went and found a tuner app that displays the note name, frequency and octave number, no problems since.

Standard guitar tuning is: E2 A2 D3 G3 B3 E4.

High G can sometimes be a real pain when trying to tune up, particularly if you are using a .09."

There are a couple of things you can do here, the first would be to examine the break angle of the string at the nut and the bridge. If it is too severe, it can cause additional pressure to the string which will cause it to snap.

If you want that higher pitch sound, try finding a string gauge in a .08". with that thickness you should be able to tune it up to G without worrying about breakage.

Also check out the article listed below. It can help explain some of the string gauges, why they are used, and what to use for different octaves.

There are a lot of ways to get gdg tuning but my favorite is the 345 strings. The strings are close to their "natural " tension when using a scale around 25".

I prefer the 25" scale myself. Easier to bend strings on scales shorter than 25.5", but harmonics are better above 24.5". So the 25" scale is a good compromise.

I always use a pitch pipe to tune unless I was tuning before a gig. It helps train your ear to hear those notes better.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Back of the box or the lid?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Dec 2. 8 Replies

Pin Tin Banjo

Started by Michael Bowlin in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Nov 1. 11 Replies

EBE tuning

Started by Thomas A Morphew in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Oct 30. 2 Replies

Blog Posts

Who will be the first to embed GO in CBG? =)

Posted by Vlad on December 6, 2023 at 12:17am 4 Comments

My first CBG from Captain Nemoff.

Posted by Vlad on November 29, 2023 at 3:41am 0 Comments

New Album 2023

Posted by Gary O'slide on November 5, 2023 at 2:41am 0 Comments

Latest Activity

Vincent Cuenca posted a discussion

hardtail bridge for 6-string license plate guitar

Hi folks:I'm building a 6-string electric license plate guitar with a hardtail bridge. Most of the…See More
1 hour ago
BrianQ. left a comment for Greg Whiddon
2 hours ago
BrianQ. left a comment for Michael Morris
3 hours ago
Doug Thorsvik commented on Poorness Studios's video

Visiting the Musical Instrument Museum (MIM) in Phoenix, Arizona | vacation trip

"Very cool video Kale! A real teaser.  Reminds me of my two trips to the museum. It is amazing…"
5 hours ago
Chance replied to Chance's discussion Building with vintage paper/pressed board cigar boxes.
5 hours ago
Taffy Evans replied to Chance's discussion Building with vintage paper/pressed board cigar boxes.
"Hi, without having a box like the ones you described I can only suggest that If you understand some…"
8 hours ago
BrianQ. left a comment for Andrew
8 hours ago
BrianQ. left a comment for Kelley martin
8 hours ago
BrianQ. left a comment for Solstice
8 hours ago
BrianQ. left a comment for Annata Evan
8 hours ago
BrianQ. left a comment for Nick
8 hours ago
BrianQ. left a comment for Bart Schoneveld
8 hours ago



© 2023   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->