There are 2 things that I'm not good at.. Painting houses and apparently soldering...
I my solder will not stick to the radio shack 1/4" jack. I've done everything I can. I've heated the contact, I've cleaned it, I've tried roughing it with sandpaper, I've tried 3 differet kinds of solder. Holy crap! What am I doing wrong? Has anyone else had issues like this?
Tags:
It may very well be that your soldering iron/gun is not getting hot enough. What type are you using? How many watts? Are you using flux?
Also make sure you are not accidentally using some type of silver solder that melts at a higher temperature.
I used to have awful problems soldering, but have cracked it now. First I ditched my old crappy soldering iron - I haven't got anything fancy, but the old one just wasn't coming up to temperature. Make sure the tip is clean and well shaped - if necessary file it to shape and get it back to the copper. You do need to replace, maintain and clean the bit. Don't use sandpaper to scuff up pots, parts etc, use a clean file. You shouldn't need to do anything to the terminals on a jack socket.
Get the iron hot, tin the tip properly, and then try tinning the lug on the jack Get the iron properly in contact with the lug, flat part of the iron in full contact and feed in some solder, it should wick in by capillary action - DO NOT move the iron about. Once you've got a goodly amount of solder melted on, steadily withdraw the iron and you should have neat shiny blob of solder on the lug. Tin the end of your wire, keeping the iron well supplied with solder, offer it up to the pre-tinned lug, press on the iron...again, don't move it, just let the solder melt under the tip, gently take the iron away and let the joint cool.
In my experience problems with soldering have been either an inefficient iron (not coming up to temperature fully) or a mishaped or dirty soldering bit. I sympathise, it's very frustrating when it doesn't seem to want to happen.
I was having same problem. Bought a new soldering iron and replacement tip for my old iron even tho the old tip looked clean. Works fine now. Took the unopened iron back to Home Depot.
Am I the only person who sees the irony of a guy named Kester having a soldering problem? :-)
Good eye Dan, didn't connect the name there. Funny...unless your the guy having the soldering problem. ;-)
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by Korrigan 10 minutes ago. 5 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. yesterday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 20. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!