The thermatic cooling fan in my ute [truck to you N American guys] died, so after replacing it, i was about to throw the old one away, but being a cbg scrounger i thought i'd see what it might contain, unfortunately my son had my bearing/gear pullers, so i had to hack it apart. Took about 30-40 minutes, but the hub has great potential as a spider bridge, with the added bonus of 8 ceramic magnets that are just itching to have wire wrapped around them

Views: 318

Reply to This

Replies to This Discussion

Good idea. Don't know if spider bridges are made from solid aluminum or cast aluminum like the piece you have there. I'd give it a try.

Is that the magnets in the bottom of the picture?

Yes Paul, a bit large, but useable in the right way

I found a used record turntable on the curbside and brought it home. The turntable doesn't work sadly, but the actual part that holds the record and turns is made of cast aluminum. I kept it encase I could use it for just this purpose. It even has 2 round sound holes in it.

You could always make the housing shorter with a hacksaw by cutting at the shoulder all the way around.

I'll probably cut it at the 1st shoulder Paul, where the 3 holes are, remove 80-90% of the vertical ring and just have 5 or 6 contact points

I'd say that's a good score darryl.  Should look great on the right guitar.

Darryl, the spider bridges StewMac sells are cast iron, as were the originals fom the thirties:

http://www.stewmac.com/Hardware_and_Parts/All_Hardware_and_Parts_by...

I think you'll find the ones they sell today are alloy Mouritz, cast iron would be extremely heavy i would think

Sorry Darryl, sure they were from cast aluminum alloy as mentioned in the link...

spider-bridge-heavy would be a good remedy for a git being neck heavy?

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


Forum

Discussion: Toothpick Frets?

Started by Habanera Hal in Feature Articles. Last reply by Mark Miller Nov 17. 27 Replies

Your take on this bizarre guitar

Started by Infirmity Citrus President in Building Secrets, Tips, Advice, Discussion. Last reply by Vladimir Mazic Nov 16. 11 Replies

Build this Wooden Kick Drum Pedal

Started by Rose Ericson in Feature Articles. Last reply by Murray Wall Nov 12. 34 Replies

Latest Activity

Keith Rearick liked bemuzic's video
1 hour ago
Keith Rearick liked Gary O'slide's video
1 hour ago
Keith Rearick liked Lappy's video
1 hour ago
Keith Rearick liked Chuck otto's photo
1 hour ago
Keith Rearick liked Uncle John's photo
1 hour ago
Keith Rearick liked Uncle John's photo
1 hour ago
John Applegate updated their profile
2 hours ago
Chuck otto liked Slowpaw Steve T's discussion CIGAR BOX NATION CHRISTMAS ALBUM 2022
2 hours ago
bemuzic posted a video

Busker Vs sound of Sainsbury’s shopping trollies! Winter Song - with 3 string Cigar Box Guitar

Busker Vs sound of Sainsbury’s shopping trollies!Winter Song - with 3 string Cigar Box Guitar and MacGyvered F# Irish whistleIt’s gone very chilly this week ...
5 hours ago
Engblom replied to Engblom's discussion Anyone with experience in 1-3-1 tuning?
"This sounds interesting, especially as it got the middle G string, which would fit my voice well if…"
8 hours ago
Chuck otto liked Uncle John's photo
8 hours ago
Uncle John replied to Engblom's discussion Anyone with experience in 1-3-1 tuning?
"I like DGB a lot for playing melody.  It makes an open G, finger chorded  two fingered C…"
8 hours ago

Music

© 2022   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->