Am I the only builder around who solely builds un-fretted, stringed instruments?  Many builders here on CBN (and elsewhere) make some truly beautiful looking and sounding CBG's.  Most, it seems, have moved onto more intricate builds: fully fretted, multiple pickups, etc.  I tried fretting once about seven years ago, and it was a disaster; I basically swore I would never attempt it again.  I do use magnetic pickups every so often, but I prefer rod and disk piezo's mainly because of the sound.  Honestly they are easier, too.

Now I know, I can certainly learn to fret a neck, I just do not see the least for myself.  Even though I have sold and gifted quite a few fretless CBG's, I build them for me, for the sake of having a creative outlet.  I build them because I cannot not build them.  Same with playing CBG's, I play them for the creativity aspect.  There are plenty of fine builders out there I could direct a potential customer to for a badass custom build with all the bells and whistles.  Everyone of my builds have "errors or happy accidents", etc, but these errors do not affect the sound. Every git I build sounds good (at least to me) and raw; actually they sound awesome per my customers.  I do not ever want my gits sounding like anything, but a raw CBG.  That being said, I guess I will keep my builds Spartan, to the Athens of other builders.  If it ain't broke, don't fix it.

Also, if you care to share: I am curious to know what motivates others to build CBG's, Dddley Bows, canjos, etc?  What is the draw for you?

Views: 246

Reply to This

Replies to This Discussion

I’m not necessarily what you’re looking for as far as “slide only” but I hear you loud and clear on the “happy accidents.” I’ve built a few slides, but it’s just not my playing style, so they usually end up recycled. Your remarks about fretting mirrors my experience with pickups. I’ve tried, and they don’t do it for me. With the way some folks trick out their instruments with electronics the cigar box becomes little more than an incidental casing or an aesthetic choice. With my bad experience with pickups I just try to get best available sound out of the box.

But what I really like is the question of motivation. I started learning guitar to better appreciate the music I was listening to. I never got to be great, merely passable. Once hooked, I wanted to learn more about how guitars worked. At that point I encountered CBGs. Once again not great but passable, but I get to make something at the collision point of math, science, art, music, and fun. That’s my motivation.

Hi Ghostbuttons, I find the method using rod piezo's with a preamp a nearly flawless method of placing a pickup into CBG. I have even used these pickups on stick-on-box variety with great success.

Also, I agree with the collision of math, science, art, music, and fun.

Fretted, fretless, acoustic, electric, whatever floats your boat. They’re all good as long as we’re building & playing them like a good builder should. Don’t count yourself out after one failed attempt (reflect, research & refine your approach with practice & help from others) or scratch your head & watch some videos, I heard that actually works :)  Personally, I like em all, especially when builders are playing their own creations? Flatpup & Flatbucker style pickups are a super duper easy alternative to conventional Magnetic & Piezo pickups? You can stick em on with double-sided tape or hot glue & they don’t need a preamp, so you don’t need a battery or external power? And they don’t amplify every bump & scratch against the box, even if you ghost them under the lid? Whatever your passion may be, just keep building it, playing it & most importantly, have fun doing it… Cheers, good luck to all future builds my friends!!! :)

I just re-read the Cigar Box Guitar Manifesto, and I am reassured in what I build. I am also reassured in what You build, as well.

Rock on brothers and sisters!

I still consider myself a beginner and every build offers new challenges and solutions, but out of the builds I've done so far (I'm on #11 and #12) I have yet to build a fretted one that I'm totally happy with. All of them have been pretty good sliders, which is fine because that's what I love to play anyhow. Still, if for no other reason than the challenge of the thing, I'll keep building fretters until I get it right.

As everyone else has said, though, it's your ax so build it like you play it!

Hi, I find that the narrow flat fingerboard used in CBG-style instruments poses little to no challenges. If the "rules" are followed regarding fretting it is far easier than fretting a full-size with a radius and or binding on the fretboard.

If one is building multiple instruments, and moving them on to other players I feel I owe it to them to do the best job I can, and to do that I use the proper tools, materials, and methods for the job at hand.

A few tips: Use a proper fret saw
use a dead blow hammer
Have the neck or fretboard on a hard firm surface
Fingerboard of a hardwood variety
The neck and fingerboard are perfectly flat to start with
Slots are the correct depth
Flush-cutting end nippers save on filing work
Black marker to mark tops of frets
Flat bar [spirit level] with sandpaper attached to level frets
A 3-corner file to re-radius the flattened frets or a proper crowning file
Suitable wet and dry papers to final polish.
I normally get away with doing the leveling etc, as good fretwork prior negates these steps.
Give it a try on scrap [suitable wood.
Taff ... HTML for replies

Thanks for the tips! Much appreciated.

Thanks Taffy for the tips on proper fretting!

Hi Chance and Justin, you are welcome.
Most of my CBGs have been built as slide guitars but fretted. I learned a long time ago that not all of my customers want to play slide. So, I fret my slide guitars so all I have to do is to change the setup for them, better than losing a sale or having to add frets.

I have a mate who has built four CB-style guitars and not fretted any of them, he asks me to do it, but he says he doesn't have the propper tools. I showed him the tools I started with, all adapted for the job.

Hey Ron, use the HTML Editor tab, the visual tab isn't visual. it's just there to confuse folks. Hahaha.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray on Thursday. 2 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by A.D.EKER Jan 29. 3 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies


Started by Ranblin' Dan Stevens in Other stuff - off topic, fun stuff, whatever. Last reply by Patrick Kelly Jan 21. 7 Replies

Fat Back Neck

Started by Jim Booth in Building Secrets, Tips, Advice, Discussion. Last reply by Jim Booth Dec 15, 2023. 7 Replies

Brick House CBG

Started by Ian Boyd in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Dec 13, 2023. 3 Replies

Best power tool for building?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Dec 11, 2023. 10 Replies

Latest Activity

smilingdog1 liked Cigar Box Nation's video
1 hour ago
smilingdog1 liked Steve Holladay's video
1 hour ago
smilingdog1 liked Uncle Toad's video
1 hour ago
3 String Blues posted a video

Dog House Blues - testing out a Line 6 Catalyst Amplifier

bought this sweet sounding amp on first quick test recording on a 3 sting cigar box guitar...the reverbs onboard this thing are just fantastic!!...
4 hours ago
BrianQ. commented on AGP #'s photo

AGP #523 -''Clean Machine''

"Covering a metal covered pickup with more metal will give unwanted eddy currents? I would’ve…"
13 hours ago
AGP # liked CaptnCatfish's video
14 hours ago
AGP # commented on AGP #'s photo

AGP #523 -''Clean Machine''

""Thanks A.D.", Yep!, sometimes things don't go quite as planned, but there's…"
14 hours ago
AGP # commented on AGP #'s photo

AGP #523 -''Clean Machine''

""Thanks UJ", the Round Soundhole was the result of the failed Ghosted Pomade Tin effort,…"
14 hours ago
Uncle Toad commented on Uncle Toad's video

Gotham epoxied-in rod piezo demo - no squeeze

"Wooden box - if you see the Gotham Guts photos, you can see the severely hacked away back and…"
14 hours ago
Uncle Toad commented on Uncle Toad's video
14 hours ago
AGP # commented on AGP #'s photo

AGP #523 -''Clean Machine''

""Yes BQ", Horrible Feedback Noises when using the Distorted Amp Settings, and a very…"
14 hours ago
Uncle Toad commented on Uncle Toad's video

Gotham Sound Check

"Poorness Studios- I am not a pro at soldering… it took hours, and one of the three way…"
14 hours ago



© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->