I completed my first Cigarbox instrument. This is a 19" scale baritone steel string uke. I have attached the neck with a hanger bolt. Not having any stationary tools I used a hand drill and was very happy with the hanger bolt in the neck but the hole in the body was not so straight. Bottom line: the action is high and off center. The instrument is good for slide and somewhat playable. My next Cigarbox project will be the same thing - a dog bowl resonator but I am interested in neck attachment strategies.If a hanger bolt is the best way then I will prepare the neck and body and have my luther guy do the drilling to insure a better result. Any ideas would be greatly appreciated. BTW you can hear this instrument on "Nobody's Business" on my soundcloud site.

Thanks in advance



Views: 789


Reply to This

Replies to This Discussion

So.....Your finished cat bowl uke looks just my tenors.....I drill a small hole in the box first on a center line (I place the hole as high as I can & still have room for the washer and nut).  I then place the box & neck upside down on the counter and tap a nail through the box hole to make a mark on the neck center line.  I also put a screw near the bottom of the neck to keep the neck aligned.  Your close....just a little adjustment needed.  Happy Buildin'

I agree with Will that you are close. A possible solution would be to open up the hole and get the position correct, then add a couple screws - sort of like Will did except two side by side.

I am sorry.....My answer was how to make your next build.....To repair you problem.....Just elongate the hole in the box in the direction that you want the neck to move and when you tighten the nut, the neck will stay in place.  Up, down, sideways or diagonal doesn't matter, it will work, believe me, I have had to fix many a problem.

I am saying pretty much the same thing, but the pictures only show the single bolt, and I suggest adding a screw or two.


How do you like the "all in one" nut/fretboard?  Did it sound pretty good? First time I have seen this.

Lonman, This is called a zero fret setup which saves the need to cut an accurate nut. I used the traditional nut setup on the next instrument I built. I like both approaches.


From one Grandpa to another, nice build!

similar idea as others are suggesting ... enlargen up the hole in the box so the bolt has room to be off, then you can shim the neck/box joint to straighten it out, and finish with a wood screw through both to lock it in.

If your box is deep enough you can go under the bowl with a stick through design.


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Sliders only.

Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by RON NORTHCUTT 2 hours ago. 11 Replies

Back of the box or the lid?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield yesterday. 8 Replies

Pin Tin Banjo

Started by Michael Bowlin in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Nov 1. 11 Replies

EBE tuning

Started by Thomas A Morphew in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Oct 30. 2 Replies

Blog Posts

? Annual Christmas Album

Posted by smilingdog1 on December 3, 2023 at 1:35am 0 Comments

My first CBG from Captain Nemoff.

Posted by Vlad on November 29, 2023 at 3:41am 0 Comments

New Album 2023

Posted by Gary O'slide on November 5, 2023 at 2:41am 0 Comments

Latest Activity

Keith Rearick liked billy jones bluez's blog post Man & A Half ~ the Delta Blues Outlaws
1 hour ago
HazelFyrebird liked Seth Tabberer's photo
2 hours ago
RON NORTHCUTT replied to Chance's discussion Sliders only.
2 hours ago
W.M. Peterson commented on W.M. Peterson's video

Sunday=Gospelday 📿🙏

"Thank you Uncle John :)"
5 hours ago
Uncle John commented on Chance's photo

#36. Diddley Bow

"Oh yeah.  I like what you are doing."
5 hours ago
Uncle John commented on Chance's photo

#28. 2 stringer

"I love it.  A keeper."
5 hours ago
Uncle John commented on Doug Thorsvik's photo
5 hours ago
Uncle John commented on A.D.EKER's photo

remembering wesley Carl

"Yes!   What a nice surprise and remembrance.  Wes was about the best."
5 hours ago
Uncle John commented on CLG's photo

Beloved Swampwitch

"I miss old Pick and Dave L.  That is a great setting.  I've been there a time or two."
5 hours ago
Uncle John commented on T-Gripped's photo

Robt. Burns Vintage 3-String

"Alder?!?   Love it.  Looks right out of 1929 Mississippi delta."
5 hours ago
Uncle John commented on Paul scofield's video

Don’t know!

"Strumming good!"
5 hours ago
Uncle John commented on Road Rash Roy's video

Prodigal Son (Rolling Stones)

"Fantastic, Roy.  Great to hear you again and I sure like that old Chicago Harmony guitar."
5 hours ago



© 2023   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->