Hi all,
I finished my first build with a home-made box a few weeks ago, and have been enjoying it immensely. I made the box from 1/8" spruce for the soundboard and 1/4" spruce for the back and sides, all solid wood.
I recently took the guitar over to a friend's house and unfortunately the gig bag fell over... When I arrived the guitar had lost much of its tone and volume, and was making a strange warbling sound which got worse with light pressure on the soundboard.
I noticed later that the lid was coming away on one of the corners (I had glued the lid down with superglue). I thought this might have been the cause of the problem, so I cut the soundboard off with a knife and re-glued with wood glue, and gave it a full 24 hours under clamps to set.
After re-stringing the guitar, there was an improvement, but the sound is still nowhere near as crisp as before, almost distorted and there is still a slight warbling at times.
I believe this may be a problem with the bracing inside the box, which looks like this:
These are excess strips of spruce which I just glued in place - does this look sufficient to keep the soundboard stiff enough?
I guess the next step will be to try to remove the soundboard again, but I'm thinking this will be a lot tougher with the wood glue - any tips there?
Anyway, any input or advice would be gratefully received.
Cheers all!
Rick
Tags:
Would think you could afford to remove some timber from the top of the through neck to accommodate the struts, the glued closed box will be quite stiff
Started by Doug Patterson. Last reply by Paul Curry Apr 13, 2017. 9 Replies 0 Likes
Started by Ron Lutz. Last reply by Ken Vickerson Apr 10, 2017. 4 Replies 2 Likes
Started by Rand Moore. Last reply by Murdoc_420 Apr 3, 2016. 13 Replies 0 Likes
Started by Rand Moore. Last reply by Philip Hale Mar 28, 2016. 8 Replies 1 Like
Started by Monterey. Last reply by Monterey Jun 28, 2015. 13 Replies 2 Likes
Started by Barsymes Cratchnee. Last reply by Monterey Mar 9, 2015. 6 Replies 0 Likes
Started by sasquatch. Last reply by sasquatch Jul 27, 2014. 8 Replies 0 Likes
Started by Barsymes Cratchnee. Last reply by gary sheldon Jun 17, 2014. 12 Replies 0 Likes
Started by Darren Addy. Last reply by gary sheldon May 19, 2014. 9 Replies 0 Likes
Started by Michael Fred Johnson. Last reply by Michael Fred Johnson Apr 29, 2014. 11 Replies 4 Likes
Started by martin baker. Last reply by martin baker Apr 29, 2014. 2 Replies 0 Likes
Started by Rand Moore. Last reply by Rand Moore Apr 28, 2014. 1 Reply 0 Likes
Started by David Ford. Last reply by Barsymes Cratchnee Jan 8, 2014. 14 Replies 0 Likes
Started by Tom Walters. Last reply by Rand Moore Jan 1, 2014. 7 Replies 0 Likes
Started by Bert the Welder. Last reply by Mike Strehlow Dec 5, 2013. 3 Replies 0 Likes
Started by Richey Kay. Last reply by Richey Kay Nov 9, 2013. 13 Replies 0 Likes
Started by Rand Moore. Last reply by Rand Moore Nov 4, 2013. 6 Replies 1 Like
Started by Richey Kay. Last reply by Richey Kay Nov 4, 2013. 6 Replies 0 Likes
Started by Rand Moore. Last reply by Rand Moore Aug 22, 2013. 9 Replies 0 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!