"After cutting 6 necks from 2 - 1x2x8ft Poplar. When I got to the last scarf cut, I read the UPC tag - premium pine..Any problems with bowing?" I built one neck to test. I used 3 E strings (52 g). After retuning a couple of times (new strings), on the 3th day there was only a 1mm bow, and it had stayed fairly in tune. I was looking at the canjo videos with Ben Baker, and he mentioned that larger dia. strings put more stress on the neck. Has anybody out there had a problem with using premium pine on a 3-string, or should I use this batch for canjos? Thanks

Views: 558

Attachments:

Reply to This

Replies to This Discussion

Thanks Erasmo. Sounds like a good idea.

Using a hardwood fret board is going to strengthen the neck and help resist bowing.

I used Pine for the neck on one of my 4 stringers. I knew it would probably bow, so I glued on a Red Oak fretboard. It still bowed. I then removed the fretboard and cut a channel for a trussrod, installed a non-adjustable trussrod and glued the fretboard back on. The the headstock bowed a little, but now it's stable.

If your Pine or Poplar neck is flatsawn and doesn't have a trussrod, I wouldn't use more than 3 strings for a scale longer than 25.5"

If you can't find any quarter sawn boards, take a couple of flat sawn boards and glue one on top of the other. Then draw a neck with headstock and heel from a side view, cut it out on a bandsaw, flip it over 90 degrees and glue a fretboard on it and you'll have a multi-piece quarter sawn neck. LOL

Lots of ways to strengthen a neck if you sit back and think about it awhile.
Also remember that the wood you get at the big hardware stores are most likely still green.

ever notice that balsa is considered "Hardwood" lol

Yeah that's messed up.

The Pine I used was Southern Yellow Pine(a glorified weed) and is probably the softest Pine. That's the Pine that's mostly available here. Pine, Aspen and Douglas Fir from American west is good. Guitarist Bill Kerchen (Hot Rod Lincoln fame) has a Tele body and neck made of Western Pine without a trussrod and it has remained usable sine the 60's. Just depends on type and location.

That Radiata Pine sounds interesting Chris There's a Asian wood called Paulownia that's very light/soft that people rave about tone wise. Wonder if it's an Asian Pine?

Laminating pieces is supposed to add strength, but all pieces used have to be straight. Gluing one piece to another can react in a negative way(bowing), lots of clamps and leaving it clamped til they completely dry can take more time with whether/moisture levels. I glued 2 pieces of Red Oak with a non-adjustable trussrod once that had too much back bow and had to be used for slide playing. You really take chances all the time with wood, you never know how it's going to turn out. Might be good, might not. That's why it's good to have an adjustable trussrod, but I wouldn't worry about it on a 3 stringer.

Ditto what Chris said,.,,.I have used Pine for half my builds.,,.the hardwood fingerboard does add strength.,.,and I know of a well known Ebay seller that has built and sold in excess of 3000 Pine necked CBG's with good results.,.,I say If your concerned you could always make that batch "high strung like a dulcimer .,.,

Thanks everyone for the info. I decided to play it safe and make 5 canjos. Here is a picture of the first one.

That canjo looks great.  I am of the school that pine is fine if you add a glued up finger board.

Thanks Uncle John. The neck is all one piece, just painted the lower half. Used copper wire for frets.

A shorter scale, say 24" and lighter strings can make a big difference.

Thanks Wade.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Busking Songs...

Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by Southern Ray 3 hours ago. 4 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Uncle Toad Feb 25. 5 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

HELP !! IN VERMONT.

Started by Ranblin' Dan Stevens in Other stuff - off topic, fun stuff, whatever. Last reply by Patrick Kelly Jan 21. 7 Replies

Latest Activity

Keith Rearick liked Southern Ray's photo
9 minutes ago
BrianQ. commented on Doug Thorsvik's video
Thumbnail

Jesus Loves Me: 2-String Violin Chugger Cigar Box Guitar

"Now that’s an oldie but goodie!!! Thanx for the sharing slinger’s!! :)"
1 hour ago
BrianQ. liked Doug Thorsvik's video
1 hour ago
Southern Ray replied to Nomad Jack's discussion Busking Songs...
" What. Noone else?"
3 hours ago
Doug Thorsvik posted a video

Jesus Loves Me: 2-String Violin Chugger Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 192nd Zoom Mtg 02/26/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
3 hours ago
Carl Floyd liked Taffy Evans's discussion CBG site issues, continued.
4 hours ago
Glenn Kaiser commented on Glenn Kaiser's photo
Thumbnail

Forms Blues Diddley Bow Pic

"Thanks Southern Ray, well they're so fun and quick to build and for me the challenge is what…"
5 hours ago
Southern Ray commented on Gary O'slide's video
Thumbnail

Cigar box guitar @RhialtoPurple impro song amp roland micro cube

" This is fabulous Gary. Kicked the lights off and cranked it up. Thank you!"
16 hours ago
Southern Ray replied to Taffy Evans's discussion CBG site issues, continued.
" I am with you 100% on all of that Taffy. This is the only social media I do and I break my…"
16 hours ago
Doug Thorsvik commented on Southern Ray's photo
Thumbnail

First Chugger

"Lookin’ good Southern Ray! Chuggers are my CBG of choice; fun and easy to play."
17 hours ago
Taffy Evans posted a discussion

CBG site issues, continued.

Hi, I thought I would bring this discussion from the Guitar For My Grandson thread.Hi again, I did…See More
19 hours ago
Carl Floyd replied to Justin Stanchfield's discussion Anyone used a violin-style tailpiece on a CBG?
19 hours ago

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->