Replies to This Discussion

Permalink Reply by Don Cook on September 13, 2015 at 12:49am

Hey kirby! I just wired mine up the way that you're describing. What I did was just wired the 2nd piezo the same as the first. Run 2 ground wires right off the back of the pot to the black lead on the piezo and 2 reds of off the post on the pot to each red on the piezos. They will both work.

• ▶ Reply

Permalink Reply by Kirby Amick on September 13, 2015 at 7:03am

Thanks Don.

basically just do the same thing twice as if it were one piezo ?

that is what I was thinking but I though maybe you could just ground to two piezos together or someting..

this is actually a pickup I made for my banjo...  thanks again,  Kirby

• ▶ Reply