The groove cut out that spans the box is already pretty thin. I don't want to shave anymore so I guess I'm going to place the piezo.. underneath the neck.. under the bridge. Before I glue it on anyone have any comments on how placing the piezo under instead of on top of neck affects the sound? Thank you
Oh and should the crystals face up or down to the neck if placed underneath the neck?
You need to be a member of Cigar Box Nation to add comments!
I've only made three, so I'm no expert. On mine, I glued the pickup to the underside of the top — right next to the bridge area — on the side with the lowest pitched string. This will pick up all the vibrations of the top and avoid some of the tinnyness of the treble string.
Good plan. I've often though about that (leaving out th treble string and keeping the piezo closer to the bass side. Then there's some loss of volume but less shrill
I have done below the neck. Still sounds just fine. The neck will have a large portion of the string vibration in it but in my thinking, is less susceptible to feedback.
Cool cause that part of the neck is fairly thin already. Making space for the piezo on top should have been better planned. I really have no choice on this one...piezo discs are not the greatest sound I heard anyway and it's not worth risking the neck breaking or bowing etc.
Seth Kent > Jon Leslie/Runaway Veal MusicSeptember 2, 2014 at 4:21pm
I got a tip from a guy a while back to attach the disc with silicone calking. Seems to help with the sound a lot. They are cheap so it is worth messing with.
Usually cushion the piezo ...hot glue , a cap , material that absorbs some thin tininess...coming from underneath not sure ...I'll try some tape and mess with positioning
best thing is to tape it on and test it first, though most have the piezo on top of the neck under the lid - no need to glue it, and sandwich the piezo face up between two pieces of soft Velcro, this will help reduce that sharp microphonic sound. :-)
Replies
I have done below the neck. Still sounds just fine. The neck will have a large portion of the string vibration in it but in my thinking, is less susceptible to feedback.
I got a tip from a guy a while back to attach the disc with silicone calking. Seems to help with the sound a lot. They are cheap so it is worth messing with.
best thing is to tape it on and test it first, though most have the piezo on top of the neck under the lid - no need to glue it, and sandwich the piezo face up between two pieces of soft Velcro, this will help reduce that sharp microphonic sound. :-)